References
- Simonis P, Dufour T, Tenenbaum H. Long-term implant survival and success: a 10-16-year follow-up of non-submerged dental implants. Clin Oral Implants Res 2010;21:772-7. https://doi.org/10.1111/j.1600-0501.2010.01912.x
- Wittneben JG, Buser D, Salvi GE, Burgin W, Hicklin S, Bragger U. Complication and failure rates with implant-supported fixed dental prostheses and single crowns: a 10-year retrospective study. Clin Implant Dent Relat Res 2014;16:356-64. https://doi.org/10.1111/cid.12066
- Esposito M, Hirsch J, Lekholm U, Thomsen P. Differential diagnosis and treatment strategies for biologic complications and failing oral implants: a review of the literature. Int J Oral Maxillofac Implants 1999;14:473-90.
- Schwarz MS. Mechanical complications of dental implants. Clin Oral Implants Res 2000;11:156-8. https://doi.org/10.1034/j.1600-0501.2000.011S1156.x
- Segundo RM, Oshima HM, da Silva IN, Burnett LH Jr, Mota EG, Silva LL. Stress distribution of an internal connection implant prostheses set: a 3D finite element analysis. Stomatologija 2009;11:55-9.
- Tawil G. Peri-implant bone loss caused by occlusal overload: repair of the peri-implant defect following correction of the traumatic occlusion. A case report. Int J Oral Maxillofac Implants 2008;23:153-7.
- Naert I, Duyck J, Vandamme K. Occlusal overload and bone/im-plant loss. Clin Oral Implants Res 2012;23:95-107.
- Mellal A, Wiskott HW, Botsis J, Scherrer SS, Belser UC. Stimulating effect of implant loading on surrounding bone. Comparison of three numerical models and validation by in vivo data. Clin Oral Implants Res 2004;15:239-48. https://doi.org/10.1111/j.1600-0501.2004.01000.x
- Merz BR, Hunenbart S, Belser UC. Mechanics of the implantabutment connection: an 8-degree taper compared to a butt joint connection. Int J Oral Maxillofac Implants 2000;15:519-26.
- Himmlova L, Dosta lova T, Ka covsky A, Konvickova S. Influence of implant length and diameter on stress distribution: a finite element analysis. J Prosthet Dent 2004;91:20-5. https://doi.org/10.1016/j.prosdent.2003.08.008
- Hudieb MI, Wakabayashi N, Kasugai S. Magnitude and direction of mechanical stress at the osseointegrated interface of the microthread implant. J Periodontol 2011;82:1061-70. https://doi.org/10.1902/jop.2010.100237
- Cehreli MC, Akca K, Iplikcioglu H. Force transmission of one- and two-piece morse-taper oral implants: a nonlinear finite element analysis. Clin Oral Implants Res 2004;15:481-9. https://doi.org/10.1111/j.1600-0501.2004.01025.x
- Asvanund P, Morgano SM. Photoelastic stress analysis of external versus internal implant-abutment connections. J Prosthet Dent 2011;106:266-71. https://doi.org/10.1016/S0022-3913(11)60128-5
- Balik A, Karatas MO, Keskin H. Effects of different abutment connection designs on the stress distribution around five different implants: a 3-dimensional finite element analysis. J Oral Implantol 2012;38:491-6. https://doi.org/10.1563/AAID-JOI-D-10-00127
- Schmitt CM, Nogueira-Filho G, Tenenbaum HC, Lai JY, Brito C, Doring H, Nonhoff J. Performance of conical abutment (Morse Taper) connection implants: a systematic review. J Biomed Mater Res A 2014;102:552-74. https://doi.org/10.1002/jbm.a.34709
- Chu CM, Huang HL, Hsu JT, Fuh LJ. Influences of internal tapered abutment designs on bone stresses around a dental implant: three-dimensional finite element method with statistical evaluation. J Periodontol 2012;83:111-8. https://doi.org/10.1902/jop.2011.110087
- Jung PW. Three dimensional finite element analysis on the contact between implant and abutment. Master's Thesis; Seoul; Seoul National University School of Dentistry; 2012.
- Kim JS. Influence of the length of internal connection on screw loosening in internal connection implants. Master's Thesis; Seoul; Department of Dentistry, Graduate School, Yonsei University; 2010.
- Gultekin BA, Gultekin P, Yalcin S. Application of finite element analysis in implant dentistry. Finite Element Analysisd New Trends and Developments. Rijeka, Croatia: Intech 2012:21-54.
- Kawaguchi T, Kawata T, Kuriyagawa T, Sasaki K. In vivo 3-dimensional measurement of the force exerted on a tooth during clenching. J Biomech 2007;40:244-51. https://doi.org/10.1016/j.jbiomech.2006.01.004
- Balik A, Karatas MO, Keskin H. Effects of different abutment connection designs on the stress distribution around five different implants: a 3-dimensional finite element analysis. J Oral Implantol 2012;38:491-6. https://doi.org/10.1563/AAID-JOI-D-10-00127
- Canullo L, Coelho PG, Bonfante EA. Mechanical testing of thinwalled zirconia abutments. J Appl Oral Sci 2013;21:20-4. https://doi.org/10.1590/1678-7757201302124
- Nagasawa S, Hayano K, Niino T, Yamakura K, Yoshida T, Mizoguchi T, Terashima N, Tamura K, Ito M, Yagasaki H, Kubota O, Yoshimura M. Nonlinear stress analysis of titanium implants by finite element method. Dent Mater J 2008;27:633-9. https://doi.org/10.4012/dmj.27.633
- Sakaguchi RL, Borgersen SE. Nonlinear contact analysis of preload in dental implant screws. Int J Oral Maxillofac Implants 1995;10:295-302.
- Binon PP. Evaluation of three slip fit hexagonal implants. Implant Dent 1996;5:235-48. https://doi.org/10.1097/00008505-199600540-00002
- Mangano C, Mangano F, Piattelli A, Iezzi G, Mangano A, La Colla L. Prospective clinical evaluation of 1920 Morse taper connection implants: results after 4 years of functional loading. Clin Oral Implants Res 2009;20:254-61. https://doi.org/10.1111/j.1600-0501.2008.01649.x
- Dibart S, Warbington M, Su MF, Skobe Z. In vitro evaluation of the implant-abutment bacterial seal: the locking taper system. Int J Oral Maxillofac Implants 2005;20:732-7.
- Rack A, Rack T, Stiller M, Riesemeier H, Zabler S, Nelson K. In vitro synchrotron-based radiography of micro-gap formation at the implant-abutment interface of two-piece dental implants. J Synchrotron Radiat 2010;17:289-94. https://doi.org/10.1107/S0909049510001834
- McCracken M. Dental implant materials: commercially pure titanium and titanium alloys. J Prosthodont 1999;8:40-3. https://doi.org/10.1111/j.1532-849X.1999.tb00006.x
- Gratton DG, Aquilino SA, Stanford CM. Micromotion and dynamic fatigue properties of the dental implant-abutment interface. J Prosthet Dent 2001;85:47-52. https://doi.org/10.1067/mpr.2001.112796
- Cha HS, Kim YS, Jeon JH, Lee JH. Cumulative survival rate and complication rates of single-tooth implant; focused on the coronal fracture of fixture in the internal connection implant. J Oral Rehabil 2013;40:595-602. https://doi.org/10.1111/joor.12065
- Holmes DC, Loftus JT. Influence of bone quality on stress distribution for endosseous implants. J Oral Implantol 1997;23:104-11.
- Woon HY, Choi YS, Cho IH. Effect of implant types and bone resorption on the fatigue life and fracture characteristics of dental implant. J Dent Rehab Appl Sci 2010;26:121-43.
- Gehrke SA, Souza Dos Santos Vianna M, Dedavid BA. Influence of bone insertion level of the implant on the fracture strength of different connection designs: an in vitro study. Clin Oral Investig 2014;18:715-20. https://doi.org/10.1007/s00784-013-1039-7
- Balshi TJ. An analysis and management of fractured implants: a clinical report. Int J Oral Maxillofac Implants 1996;11:660-6.
Cited by
- 지대주 나사 풀림 방지를 위한 새로운 Lock Screw 시스템의 효과에 대한 유한요소해석적 연구 vol.35, pp.3, 2016, https://doi.org/10.14368/jdras.2019.35.3.132