Computers and Concrete

  • 제18권5호
  • /
  • Pages.969-982
  • /
  • 2016
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A probabilistic fatigue failure analysis for FRSCC with Granite sawing waste

  • K, Aarthi. (Department of Civil Enginnering, Alagappa Chettiar College of Engineering and Technology) ;
  • K, Arunachalam. (Department of Civil Engineering, Thiagarajar College of Engineering) ;
  • S, Thivakar. (Department of Civil Engineeeirng, Fatima Michael College of Engineering and Technology)
  • 투고 : 2015.11.22
  • 심사 : 2016.07.12
  • 발행 : 2016.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper investigates the compressive fatigue behaviour of polypropylene fibre reinforced self compacting concrete with Granite Sawing Waste (GSW). An experimental programme was conducted to obtain the fatigue lives of fibre reinforced self compacting concrete (FRSCC) at various stress levels. The stress ratio was kept constant as 0.3. Compressive fatigue test was conducted on 60 cubic specimens with 100mm edge length and 0.1% of polypropylene fibres at a frequency of 0.05Hz. The test results indicate that the fatigue lives of concretes containing granite sawing waste follow the double-parameter Weibull distribution. The fatigue strength equations have been developed based on different probabilities of failure.

키워드

참고문헌

  1. Aarthi. K., Arunachalam.K. and Dileepan, U. (2014), "Utilisation of granite sawing waste in self compacting concrete", Gradevinar, 66(11), 997-1006.
  2. Medeiros, A., Zhang, X., Ruiz, G., Rena, C.Y. and Velasco, M.D.S.L. (2015), "Effect of the loading frequency on the compressive fatigue behavior of plain and fiber reinforced concrete", Int. J. Fatigue, 70, 342-350. https://doi.org/10.1016/j.ijfatigue.2014.08.005
  3. Leung, C.K., Cheung, Y.N. and Zhang, J. (2007), "Fatigue enhancement of concrete beam with ECC layer", Cement Concrete Res., 37(5), 743-750. https://doi.org/10.1016/j.cemconres.2007.01.015
  4. Liu, F., Zheng, W., Li, L., Feng, W. and Ning, G. (2013), "Mechanical and fatigue performance of rubber concrete", Constr. Build. Mater., 47, 711-719. https://doi.org/10.1016/j.conbuildmat.2013.05.055
  5. Ganesan, N., Raj, J.B. and Shashikala, A.P. (2013), "Flexural fatigue behavior of self compacting rubberized concrete", Constr. Build. Mater., 44, 7-14. https://doi.org/10.1016/j.conbuildmat.2013.02.077
  6. Goel, S., Singh, S.P. and Singh, P. (2012), "Flexural fatigue strength and failure probability of self compacting fibre reinforced concrete beams", Eng. Struct., 40, 131-140. https://doi.org/10.1016/j.engstruct.2012.02.035
  7. Li, H., Zhang, M.H. and Ou, J.P. (2007), "Flexural fatigue performance of concrete containing nano-particles for pavement", Int. J. Fatigue, 29(7), 1292-1301. https://doi.org/10.1016/j.ijfatigue.2006.10.004
  8. Zhang, J. and Li, V.C. (2002), "Monotonic and fatigue performance in bending of fiber-reinforced engineered cementitious composite in overlay system", Cement Concrete Res., 32(3), 415-423. https://doi.org/10.1016/S0008-8846(01)00695-0
  9. Lee, M.K. and Barr, B.I.G. (2004), "An overview of the fatigue behaviour of plain and fibre reinforced concrete", Cement Concrete Compos., 26(4), 299-305. https://doi.org/10.1016/S0958-9465(02)00139-7
  10. Saucedo, L., Rena, C.Y., Medeiros, A., Zhang, X. and Ruiz, G. (2013), "A probabilistic fatigue model based on the initial distribution to consider frequency effect in plain and fiber reinforced concrete", Int. J. Fatigue, 48, 308-318. https://doi.org/10.1016/j.ijfatigue.2012.11.013
  11. Okamura, H. and Ouchi, M. (2003), "Self-compacting concrete", J. Adv. Concrete Tech., 1(1), 5-15. https://doi.org/10.3151/jact.1.5
  12. Cachim, P.B., Figueiras, J.A. and Pereira, P.A. (2002), "Fatigue behavior of fiber-reinforced concrete in compression", Cement Concrete Compos., 24(2), 211-217. https://doi.org/10.1016/S0958-9465(01)00019-1
  13. Peng, X. and Meyer, C. (2000), "A continuum damage mechanics model for concrete reinforced with randomly distributed short fibers", Comput. Struct., 78(4), 505-515. https://doi.org/10.1016/S0045-7949(00)00045-6
  14. Singh, S.P. and Kaushik, S.K. (2003), "Fatigue strength of steel fibre reinforced concrete in flexure", Cement Concrete Compos., 25(7), 779-786. https://doi.org/10.1016/S0958-9465(02)00102-6
  15. Thomas, C., Setien, J., Polanco, J.A., Lombillo, I. and Cimentada, A. (2014), "Fatigue limit of recycled aggregate concrete", Constr. Build. Mater., 52, 146-154. https://doi.org/10.1016/j.conbuildmat.2013.11.032
  16. Yin, W. and Hsu, T.T. (1995), "Fatigue behavior of steel fiber reinforced concrete in uniaxial and biaxial compression", Mater. J., 92(1), 71-81.
  17. Chen, Y., Ni, J., Zheng, P., Azzam, R., Zhou, Y. and Shao, W. (2011), "Experimental research on the behaviour of high frequency fatigue in concrete", Eng. Fail. Anal., 18(7), 1848-1857. https://doi.org/10.1016/j.engfailanal.2011.06.012
  18. Chen, Y., Wang, K., Wang, X. and Zhou, W. (2013), "Strength, fracture and fatigue of pervious concrete", Constr. Build. Mater., 42, 97-104. https://doi.org/10.1016/j.conbuildmat.2013.01.006
  19. Deng, Z. (2005), "The fracture and fatigue performance in flexure of carbon fiber reinforced concrete", Cement Concrete Compos., 27(1), 131-140. https://doi.org/10.1016/j.cemconcomp.2004.03.002