Computers and Concrete

  • 제18권6호
  • /
  • Pages.1065-1082
  • /
  • 2016
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Modeling mechanical strength of self-compacting mortar containing nanoparticles using wavelet-based support vector machine

  • 투고 : 2016.04.04
  • 심사 : 2016.09.10
  • 발행 : 2016.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

The main aim of this study is to predict the compressive and flexural strengths of self-compacting mortar (SCM) containing $nano-SiO_2$, $nano-Fe_2O_3$ and nano-CuO using wavelet-based weighted least squares-support vector machines (WLS-SVM) approach which is called WWLS-SVM. The WWLS-SVM regression model is a relatively new metamodel has been successfully introduced as an excellent machine learning algorithm to engineering problems and has yielded encouraging results. In order to achieve the aim of this study, first, the WLS-SVM and WWLS-SVM models are developed based on a database. In the database, nine variables which consist of cement, sand, NS, NF, NC, superplasticizer dosage, slump flow diameter and V-funnel flow time are considered as the input parameters of the models. The compressive and flexural strengths of SCM are also chosen as the output parameters of the models. Finally, a statistical analysis is performed to demonstrate the generality performance of the models for predicting the compressive and flexural strengths. The numerical results show that both of these metamodels have good performance in the desirable accuracy and applicability. Furthermore, by adopting these predicting metamodels, the considerable cost and time-consuming laboratory tests can be eliminated.

키워드

참고문헌

  1. ASTM C150 (2001), "Standard specification for Portland cement, Annual Book of ASTM Standards", ASTM, Philadelphia, PA, USA.
  2. ASTM C778 (2011), "Standard specification for standard sand, annual book of ASTM standards", ASTM, Philadelphia, PA, USA.
  3. Calisir, D. and Doğantekin, E. (2011), "An automatic diabetes diagnosis system based on LDA-Wavelet Support Vector Machine Classifier", Exp. Syst. Appl., 38(7), 8311-8315. https://doi.org/10.1016/j.eswa.2011.01.017
  4. Cevik, A., Kurtoglu, A.E., Bilgehan, M., Gulsan, M.E. and Albegmprli, H.M. (2015), "Support vector machines in structural engineering: a review", J. Civil Eng. Manag., 21(3), 261-281. https://doi.org/10.3846/13923730.2015.1005021
  5. Chitti, H., Khatibinia, M., Akbarpour, A. and Naseri, H.R. (2016), "Reliability-based design optimization of concrete gravity dams using subset simulation", Int. J. Optim. Civil. Eng., 6(3), 329-348.
  6. Chou, J.S., Chiu, C.K., Farfoura, M. and Al-Taharwa, I. (2011), "Optimizing the prediction accuracy of concrete compressive strength based on a comparison of data-mining techniques", J. Comput. Civ. Eng., 25(3), 242-253. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000088
  7. EFNARC (2002), "Specification and guidelines for self-compacting concrete", UK.
  8. Erdal, H.I., Karakurt, O. and Namli, E. (2013), "High performance concrete compressive strength forecasting using ensemble models based on discrete wavelet transform", Eng. Appl. Artif. Intell., 26(4), 1246-1254. https://doi.org/10.1016/j.engappai.2012.10.014
  9. Gharehbaghi, S. and Khatibinia, M. (2015), "Optimal seismic design of reinforced concrete structures under time history earthquake loads using an intelligent hybrid algorithm", Earth. Eng. Eng. Vib., 14(1), 97-109. https://doi.org/10.1007/s11803-015-0009-2
  10. Guang, N.H. and Zong, W.J. (2000), "Prediction of compressive strength of concrete by neural networks", Cement Concrete Res., 30(8), 1245-1250. https://doi.org/10.1016/S0008-8846(00)00345-8
  11. Jalal, M., Mansouri, E., Sharifipour, M. and Pouladkhan, A.R. (2012), "Mechanical, rheological, durability and microstructural properties of high performance self-compacting concrete containing $SiO_2$ micro and nanoparticles", Mater. Des., 34, 389-400. https://doi.org/10.1016/j.matdes.2011.08.037
  12. Kecman, V. (2001), "Leaming and soft computing: Support vector machines, neural networks, and fuzzy logic models", The MIT Press, Cambridge, Massachusetts, London, England.
  13. Kewalramani, M.A. and Gupta, R. (2006), "Concrete compressive strength prediction using ultrasonic pulse velocity through articial neural networks", Automat. Constr., 15(3), 374-379. https://doi.org/10.1016/j.autcon.2005.07.003
  14. Khatibinia, M. and Khosravi, S. (2014), "A hybrid approach based on an improved gravitational search algorithm and orthogonal crossover for optimal shape design of concrete gravity dams", Appl. Soft Comput., 16, 223-233. https://doi.org/10.1016/j.asoc.2013.12.008
  15. Khatibinia, M., Chitti, H., Akbarpour, A. and Naseri, H.R. (2016), "Shape optimization of concrete gravity dams considering dam-water-foundation interaction and nonlinear effects", Int. J. Optim. Civil. Eng., 6(1), 115-34.
  16. Khatibinia, M., Fadaee, M.J., Salajegheh, J. and Salajegheh, E. (2013), "Seismic reliability assessment of RC structures including soil-structure interaction using wavelet weighted least squares support vector machine", Reliability Eng. Syst. Safety, 110, 22-33. https://doi.org/10.1016/j.ress.2012.09.006
  17. Khatibinia, M., Gharehbagh, S. and Moustafa, A. (2015), "Seismic reliability-based design optimization of reinforced concrete structures including Soil-Structure interaction effects", Earthquake Engineering-From Engineering Seismology to Optimal Seismic Design of Engineering Structure, 267-304.
  18. Khatibinia, M., Salajegheh, E., Salajegheh, J. and Fadaee, M.J. (2013b), "Reliability-based design optimization of RC structures including soil-structure interaction using a discrete gravitational search algorithm and a proposed metamodel", Eng. Optimiz., 45(10), 1147-1165. https://doi.org/10.1080/0305215X.2012.725051
  19. Kronland-Martinet, R., Morlet, J. and Grossmann, A. (1987), "Analysis of sound patterns through wavelet transforms", Int. J. Pattern Recogn. Artif. Intell., 1(02), 273-302. https://doi.org/10.1142/S0218001487000205
  20. Lekutai, G. (1997), "Adaptive self-tuning neuro wavelet network controllers", PhD Thesis; Electrical Engineering Department, Virginia Polytechnic Institute and State University.
  21. Madandoust, R. and Mousavi, Y. (2012), "Fresh and hardened properties of self-compacting concrete containing metakaolin", Constr. Build .Mater., 35, 752-760. https://doi.org/10.1016/j.conbuildmat.2012.04.109
  22. Mahani, A.S., Shojaee, S., Salajegheh, E. and Khatibinia, M. (2015), "Hybridizing two-stage meta-heuristic optimization model with weighted least squares support vector machine for optimal shape of double-arch dams", Appl. Soft. Comput., 27, 205-218 https://doi.org/10.1016/j.asoc.2014.11.014
  23. Mirzaei, Z., Akbarpour, M., Khatibinia, M. and Khashei Siuki, A. (2015), "Optimal design of homogeneous earth dams by particle swarm optimization incorporating support vector machine approach", Geomech. Eng., 9(6), 709-727. https://doi.org/10.12989/gae.2015.9.6.709
  24. Mohseni, E., Sadat Hosseiny, S., Ranjbar, M.M., Roshandel, E. and Yazdi, M.A. (2015), "The effects of silicon dioxide, iron(III) oxide and copper oxide nanomaterials on the properties of self-compacting mortar containing fly ash", Mag. Concrete. Res., 67(20), 1112-1124. https://doi.org/10.1680/macr.15.00051
  25. Nazari, A. and Riahi, S. (2011a), "Effects of CuO nanoparticles on compressive strength of self-compacting concrete", Sadhana, 36(3), 371-391. https://doi.org/10.1007/s12046-011-0023-7
  26. Nazari, A. and Riahi, S. (2011b), "Effects of CuO nanoparticles on compressive strength of self-compacting concrete", J. Indian. Acad. Sci., 371-391.
  27. Niknam, T. and Farsani, E.A. (2010), "A hybrid self-adaptive particle swarm optimization and modified shuffled frog leaping algorithm for distribution feeder reconfiguration", Eng. Appl. Artif. Intell., 23(8), 1340-1349. https://doi.org/10.1016/j.engappai.2010.02.005
  28. Oltulu, M. and Sahin, R. (2011), "Single and combined effects of nano-$SiO_2$, nano-$Al_2O_3$ and nano-$Fe_2O_3$ powders on compressive strength and capillary permeability of cement mortar containing silica fume", Mater. Sci. Eng.: A, 528(22), 7012-7019. https://doi.org/10.1016/j.msea.2011.05.054
  29. Oltulu, M. and Sahin, R. (2013), "Effect of nano-$SiO_2$, nano-$Al_2O_3$ and nano-$Fe_2O_3$ powders on compressive strengths and capillary water absorption of cement mortar containing fly ash: a comparative study", Ener. Build., 58, 292-301. https://doi.org/10.1016/j.enbuild.2012.12.014
  30. Oztas, A., Pala, M., Ozbay, E., Kanca, E., Caglar, N. and Bhatti, M.A. (2006), "Predicting the compressive strength and slump of high strength concrete using neural network", Constr. Build. Mater., 20(9), 769-775. https://doi.org/10.1016/j.conbuildmat.2005.01.054
  31. Park, D. and Rilett, L.R. (1999), "Forecasting freeway link travel times with a multilayer feedforward neural network", Comput.-Aid. Civil and Infrastr. Eng., 14(5), 357-367. https://doi.org/10.1111/0885-9507.00154
  32. Park, Y.J. and Ang, A.H.S. (1985), "Mechanistic seismic damage model for reinforced concrete", J. Struct. Eng., 111(4), 722-739. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(722)
  33. Quan, T., Liu, X. and Liu, Q. (2010), "Weighted least squares support vector machine local region method for nonlinear time series prediction", Appl. Soft Comput., 10(2), 562-566. https://doi.org/10.1016/j.asoc.2009.08.025
  34. Ravi, V. (2008), "Advance in banking technology and management: impacts of ICT and CRM", Hershey, New York, NY, USA.
  35. Sobhani, J., Khanzadi, M. and Movahedian, A.H. (2013), "Support vector machine for prediction of the compressive strength of no-slump concrete", Comput. Concrete, 11(4), 337-350. https://doi.org/10.12989/cac.2013.11.4.337
  36. Sobolev, K., Flores, I., Torres-Martinez, L.M., Valdez, P.L., Zarazua, E. and Cuellar, E.L. (2009), "Engineering of $SiO_2$ nanoparticles for optimal performance in nano cement-based materials", Nanotechnology in construction, 3, 139-148, Springer Berlin Heidelberg.
  37. Suykens, J.A., De Brabanter, J., Lukas, L. and Vandewalle, J. (2002), "Weighted least squares support vector machines: robustness and sparse approximation", Neurocomput., 48(1), 85-105. https://doi.org/10.1016/S0925-2312(01)00644-0
  38. Suykens, J.A.K., Brabanter, J.D., Lukas, L. and Vandewalle, J. (1999), "Least squares support vector machine classifiers", Neural. Process. Lett., 9(3), 293-300. https://doi.org/10.1023/A:1018628609742
  39. Topcu, I.B. and Saridemir, M. (2008), "Prediction of compressive strength of concrete containing fly ash using artificial neural network and fuzzy logic", Comp. Mater. Sci., 41(3), 305-311. https://doi.org/10.1016/j.commatsci.2007.04.009
  40. Vapnik, V. and Lerner, A. (1963), "Generalized portrait method for pattern recognition", Automat. Rem. Contr., 24(6), 774-780.
  41. Wu, Q. (2010), "Product demand forecasts using wavelet kernel support vector machine and particle swarm optimization in manufacture system", J. Comput. Appl. Math., 233(10), 2481-2491. https://doi.org/10.1016/j.cam.2009.10.030
  42. Wu, Q. (2011), "Hybrid model based on wavelet support vector machine and modified genetic algorithm penalizing Gaussian noises for power load forecasts", Exp. Syst. Appl., 38(1), 379-385. https://doi.org/10.1016/j.eswa.2010.06.075
  43. Yeh, I.C. (1998), "Modeling of strength of high-performance concrete using artificial neural networks", Cem. Concr. Res., 28(12), 1797-808. https://doi.org/10.1016/S0008-8846(98)00165-3
  44. Zavar, M., Rahati, S., Akbarzadeh-T, M.R. and Ghasemifard, H. (2011), "Evolutionary model selection in a wavelet-based support vector machine for automated seizure detection", Exp. Syst. Appl., 38(9), 10751-10758. https://doi.org/10.1016/j.eswa.2011.01.087

피인용 문헌

  1. Modeling the Fresh and Hardened Stage Properties of Self-Compacting Concrete using Random Kitchen Sink Algorithm vol.12, pp.1, 2016, https://doi.org/10.1186/s40069-018-0246-7
  2. Investigation of SCC characterizations incorporating supplementary cementitious materials vol.8, pp.3, 2016, https://doi.org/10.1680/jemmr.18.00024