한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제25권2호
  • /
  • Pages.132-137
  • /
  • 2016
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

수면 주행 로봇의 안정성 향상을 위한 정적 꼬리 기구변수 최적화

Robust Optimal Design of Tail Geometry for Stable Water-running Robots

  • Lee, DongGyu (School of Mechanical Engineering, Yeungnam University) ;
  • Jang, JaeHyung (School of Mechanical Engineering, Yeungnam University) ;
  • Seo, TaeWon (School of Mechanical Engineering, Yeungnam University)
  • 투고 : 2016.03.08
  • 심사 : 2016.04.14
  • 발행 : 2016.04.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Biomimetics involves the design of robotic platforms inspired from living creatures to achieve efficient operation under environmental conditions. A development within biomimetics involves investigating the function of a tail and applying it to robot design. This study aims to define the function of a static tail for water-running robots, and optimize its geometric and compliance parameters. The rolling angle of the tail is determined by the objective function, while the area and fillet ratio are used for geometric design and compliance parameters in the rolling and yawing directions. Repeated motion of the water-running robot's footpads at frequencies of 9 and 10 Hz is used as the operating condition. Robust design based on the Taguchi methodology is performed via orthogonal arrays. The optimized tail design derived in this study will be implemented in a robotic platform to improve steering and balancing functions in the pitching direction.

키워드

참고문헌

  1. He, Q., Yu, M., Li, Y., Chen, X., Zhang, H., Gong, L., Dai, Z., 2014, Adhesion Characteristics of a Novel Synthetic Polydimethylsiloxane for Bionic Adhesive Pads, Journal of Bionic Engineering, 11:3 371-377. https://doi.org/10.1016/S1672-6529(14)60050-0
  2. Wang, G., Guo, Z., Liu, W., 2014, Interfacial Effects of Superhydrophobic Plant Surfaces: A Review, Journal of Bionic Engineering, 11:3 325-345. https://doi.org/10.1016/S1672-6529(14)60047-0
  3. Floyd, S., Sitti, M., 2008, Design and Development of the Lifting and Propulsion Mechanism for a Biologically Inspired Water Runner Robot, IEEE Transaction on Robotics, 24:3 698-709. https://doi.org/10.1109/TRO.2008.924258
  4. Kim, H., Lee, D., Jeong, K., Seo, T., 2015, Water and Ground-running Robotic Platform by Repeated Motion of Six Spherical Footpads, IEEE-ASME Transaction on Mechatronics, 21:1 175-183.
  5. Briggs, R., Lee, J., Haberland, M., Kim, S., 2012, Tails in Biomimetic Design: Analysis, Simulation, and Experiment, IEEE/RSJ International Conference on Intelligent Robots and Systems, 1473-1480.
  6. Fisher, C., Patel, A., 2014, Preparation of Papers for IFAC Conferences & Symposia: Flip Bot: A Lizard Inspired Stunt Robot, The International Federation of Automatic Control, 4837-4842
  7. Libby, T., Moore, T., Chang-siu, E., Cohen, D., Jusufi, A., Full, R., 2012, Tail-assisted Pitch Controin Lizards, Robots and Dinosaurs, Nature, 481 181-184. https://doi.org/10.1038/nature10710
  8. Kohut, N., Zarrouk, D., Peterson, K., Fearing, R., 2013, Aerodynamic Steering of a 10cm High-speed Running Robot, IEEE/RSJ International Conference on Intelligent Robots and Systems, 5593-5599.
  9. Kim, H., Lee, D., Seo, T., 2015, Rolling Stability Enhancement Via a Balancing Tail for Water-running Robots, Journal of Bionic Engineering, 12:3 395-405. https://doi.org/10.1016/S1672-6529(14)60131-1
  10. Park, H., Floyd, S., Sitti, M., 2009, Roll and Pitch Motion Analysis of a Biologically Inspired Quadruped Water Runner Robot, International Journal of Robotics Research, 29:10 1281-1297. https://doi.org/10.1177/0278364909354391
  11. Lee, D. G., Kim, H., Seo, T., 2016, Experimental Study on Drag-induced Balancing Via a Static Tail for Water-running Robot, Journal of Bionic Engineering, Accepted for Publication.
  12. Lee, S.-J., Lee, J. H., Lee, D. Y., Seo, T., Kim, J. H., 2014, Optimal Parametric Design of Coil Gun to Improve Muzzle Velocity, Journal of the Korean Society of Manufacturing Technology Engineers, 23:4 408-412. https://doi.org/10.7735/ksmte.2014.23.4.408
  13. Choi, J. H., Kim, J. H, Park, S.-S., Seo, T., 2014, Robust Optimum Design of Resonance Linear Electric Generator for Vehicle Suspension, Journal of the Korean Society of Manufacturing Technology Engineers, 23:4 403-407. https://doi.org/10.7735/ksmte.2014.23.4.403
  14. Liu, Y., Shin, M., Seo, T., 2014, Optimization Design of Dry Adhesion for Wall-climbing Robot on Various Curvatures Based on Experiment, Journal of the Korean Society of Manufacturing Technology Engineers, 23:4 398-402. https://doi.org/10.7735/ksmte.2014.23.4.398

피인용 문헌

  1. 공구 형상에 따른 CFRP의 가공결함 제거에 관한 연구 vol.16, pp.4, 2016, https://doi.org/10.14775/ksmpe.2017.16.4.016