Journal of electromagnetic engineering and science

The Korean Institute of Electromagnetic Engineering and Science (한국전자파학회)
권호 표지
DOI QR코드

DOI QR Code

Creating a Gain Enhancement Technique for a Conical Horn Antenna by Adding a Wire Medium Structure at the Aperture

  • Duangtang, Pumipong (School of Telecommunication Engineering, Suranaree University of Technology) ;
  • Mesawad, Piyaporn (School of Telecommunication Engineering, Suranaree University of Technology) ;
  • Wongsan, Rangsan (School of Telecommunication Engineering, Suranaree University of Technology)
  • Received : 2016.02.26
  • Accepted : 2016.04.15
  • Published : 2016.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposes a technique for improving the conventional conical horn antenna for the X-band frequency using metamaterial on a wire medium structure. The main idea of this research is the application of the wire medium metamaterial to the conical horn's aperture for the enhancement of the horn's gain; this is done without changing the antenna's dimensions. The results show that the wire medium structure can increase the gain of a conventional conical horn antenna from approximately 17.7 dB to 20.9 dB (an increase of approximately 3.2 dB). A prototype antenna was fabricated, and its fundamental parameters including its reflection coefficient ($S_{11}$), radiation patterns, and directive gain were measured. The simulated and measured results were very good. The wire medium structure of the proposed antenna improved the radiation pattern, enhanced the directivity, increased the gain, and reduced the side lobe level using a simple integrated wire medium structure.

Keywords

References

  1. M. K. T. Al-Nuaimi, W. Hong, and Y. Zhang, "Design of high-directivity compact-size conical horn lens antenna," IEEE Antennas and Wireless Propagation Letters, vol. 13, pp. 467-470, 2014. https://doi.org/10.1109/LAWP.2013.2297519
  2. V. Torres, B. Orazbayev, V. Pacheco-Pena, J. Teniente, M. Beruete, M. Navarro-Cia, M. Sorolla Ayza, and N. Engheta, "Experimental demonstration of a millimeter-wave metallic ENZ lens based on the energy squeezing principle," IEEE Transactions on Antennas and Propagation, vol. 63, no. 1, pp. 231-239, 2015. https://doi.org/10.1109/TAP.2014.2368112
  3. Y. C. Jun, J. L. Reno, M. Sinclair, and I. Brener, "Epsilonnear-zero subwavelength optoelectronics: Electrically tunable ENZ strong coupling," in Proceedings of 2013 Conference on Lasers and Electro-Optics (CLEO), San Jose, CA, 2013.
  4. P. Burghignoli, G. Lovat, F. Capolino, D. R. Jackson, and D. R. Wilton, "Directive leaky-wave radiation from a dipole source in a wire-medium slab," IEEE Transactions on Antennas and Propagation, vol. 56, no. 5, pp. 1329-1339, 2008. https://doi.org/10.1109/TAP.2008.922620
  5. P. Burghignoli, G. Lovat, F. Capolino, D. R. Jackson, and D. R. Wilton, "Modal propagation and excitation on a wire-medium slab," IEEE Transactions on Microwave Theory and Techniques, vol. 56, no. 5, pp. 1112-1124, 2008. https://doi.org/10.1109/TMTT.2008.921657
  6. A. Tomaz, J. J. Barroso, P. J. Castro, and A. J. Orlando, "Experimental investigation on the radiation pattern of a horn antenna loaded by a wire medium," in Proceedings of 2013 IEEE Antennas and Propagation Society International Symposium (APSURSI), Orlando, FL, 2013, pp. 958-959.
  7. J. Qiu, Y. Suo, and W. Li, "Research and design on ultrawideband dielectric hemispheric lens loaded quad-ridged horn antenna," in Proceedings of 6th International Conference on Antenna Theory and Techniques, Sevastopol, 2007, pp. 253-255.
  8. M. Reyes-Ayala and H. Jardon-Aguilar, "Dielectric load in short standard conical horns for satellite applications," in Proceedings of 2014 IEEE Radio and Wireless Symposium (RWS), Newport Beach, CA, 2014, pp. 235-237.
  9. E. Doumanis, D. Zelenchuk, V. Fusco, and G. Goussetis, "Conical horn antenna with spiral phase plate for difference pattern generation," in Proceedings of 2013 7th European Conference on Antennas and Propagation (EuCAP), Gothenburg, Sweden, 2013, pp. 1309-1312.
  10. D. Ramaccia, F. Scattone, F. Bilotti, and A. Toscano, "Broadband compact horn antennas by using EPS-ENZ metamaterial lens," IEEE Transactions on Antennas and Propagation, vol. 61, no. 6, pp. 2929-2937, 2013. https://doi.org/10.1109/TAP.2013.2250235
  11. A. Tomaz, J. J. Barroso, U. C. Hasar, and A. J. F. Orlando, "Directivity enhancement of an X-band horn antenna loaded by a wire medium," in PIERS Proceedings, Stockholm, Sweden, 2013.
  12. M. K. T. Al-Nuaimi, W. Hong, and Y. Zhang, "Design of high-directivity compact-size conical horn lens antenna," IEEE Antennas and Wireless Propagation Letters, vol. 13, pp. 467-470, 2014. https://doi.org/10.1109/LAWP.2013.2297519
  13. Y. Zhao, P. A. Belov, and Y. Hao, "Modelling of wave propagation in wire media using spatially dispersive finitedifference time-domain method: numerical aspects," IEEE Transactions on Antennas and Propagation, vol. 55, no. 6, pp. 1506-1513, 2007. https://doi.org/10.1109/TAP.2007.897320
  14. P. A. Belov, S. A. Tretyakov, and A. J. Viitanen, "Dispersion and reflection properties of artificial media formed by regular lattices of ideally conducting wires," Journal Electromagnetic Waves Application, vol. 16, no. 8, pp. 1153-1170, 2002. https://doi.org/10.1163/156939302X00688
  15. S. I. Maslovski, S. A. Tretyakov, and P. A. Belov, "Wire media with negative effective permittivity: a quasi-static model," Microwave and Optical Technology Letter, vol. 35, no. 1, pp. 47-51, 2002. https://doi.org/10.1002/mop.10512
  16. A. P. King, "The radiation characteristics of conical horn antennas," Proceedings of the IRE, vol. 38, no. 3, pp. 249-251, 1950. https://doi.org/10.1109/JRPROC.1950.230734

Cited by

  1. A lightweight waveguide horn antenna made via 3D printing and conductive spray coating vol.59, pp.3, 2017, https://doi.org/10.1002/mop.30374
  2. Three-dimensional-printed tapered cavity-backed flush-mountable wideband antenna for UAV vol.59, pp.12, 2017, https://doi.org/10.1002/mop.30863
  3. Design of a Vivaldi-Fed Hybrid Horn Antenna for Low-Frequency Gain Enhancement vol.66, pp.1, 2018, https://doi.org/10.1109/TAP.2017.2776608
  4. Dual-band MNG patch antenna for smart helmet vol.54, pp.19, 2018, https://doi.org/10.1049/el.2018.6044
  5. Robust Design of 3D-Printed 6–18 GHz Double-Ridged TEM Horn Antenna vol.8, pp.9, 2018, https://doi.org/10.3390/app8091582
  6. Numerical study of electromagnetic wave propagation characteristics in collapsed building for rescue radar applications vol.40, pp.4, 2018, https://doi.org/10.4218/etrij.2017-0288
  7. Design of a Wideband Antipodal Vivaldi Antenna with an Asymmetric Parasitic Patch vol.18, pp.1, 2018, https://doi.org/10.26866/jees.2018.18.1.29