Smart Structures and Systems

  • 제17권5호
  • /
  • Pages.691-708
  • /
  • 2016
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

The smart PFD with LRB for seismic protection of the horizontally curved bridge

  • Kataria, N.P. (Department of Civil Engineering, Indian Institute of Technology Bombay) ;
  • Jangid, R.S. (Department of Civil Engineering, Indian Institute of Technology Bombay)
  • 투고 : 2014.12.22
  • 심사 : 2015.12.17
  • 발행 : 2016.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, number of smart material are investigated and widely used in civil construction and other industries. Present study investigates the application of smart semi-active piezoelectric friction damper (PFD) made with piezoelectric material for the seismic control of the horizontally curved bridge isolated with lead rubber bearing (LRB). The main aim of the study is to investigate the effectiveness of hybrid system and to find out the optimum parameters of PFD for seismic control of the curved bridge. The selected curved bridge is a continuous three-span concrete box girder supported on pier and rigid abutment. The PFD is located between the deck and abutments or piers in chord and radial directions. The bridge is excited with four different earthquake ground motions with all three components (i.e. two horizontal and a vertical) having different characteristics. It is observed that the use of semi-active PFD with LRB is quite effective in controlling the response of the curved bridge as compared with passive system. The incorporation of the smart damper requiring small amount of energy in addition with an isolation system can be used for effective control the curved bridge against the dynamic loading.

키워드

참고문헌

  1. Ates, S. and Constantinou, M.C. (2011a), "Example of application of response history analysis for seismically isolated curved bridges on drilled shaft with springs representing soil", Soil Dyn. Earthq. Eng., 31, 334-350. https://doi.org/10.1016/j.soildyn.2010.09.002
  2. Ates, S. and Constantinou, M.C. (2011b), "Example of application of response spectrum analysis for seismically isolated curved bridges including soil-foundation effects", Soil Dyn. Earthq. Eng., 31, 648-661. https://doi.org/10.1016/j.soildyn.2010.12.002
  3. Berger/Abam Engineers, (1996), Federal Highway Administration Seismic Design Course, Design Example No. 6, Publication no. FHWA-SA-97-011 and Barcode no. PB97-142111.
  4. Chen, G.D. and Chen, C.C. (2000), "Behavior of piezoelectric friction dampers under dynamic loading", Proceedings of the SPIE Symposium on Smart Structure Materials, Smart Systems for Bridges, Structures, and Highways, Newport Beach, California, April.
  5. Chen, C. and Chen, G. (2002), "Non-linear control of a 20-storey steel building with active piezoelectric friction dampers", Struct. Eng. Mech., 14(1), 21-38. https://doi.org/10.12989/sem.2002.14.1.021
  6. Chen, G. and Chen, C. (2004), "Semi-active control of the 20-story benchmark building with piezoelectric friction dampers", J. Eng. Mech.-ASCE, 130(4), 393-400. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:4(393)
  7. Monzon, E.V., Wei, C., Buckle, I.G. and Itani A. (2012), "Seismic response of full and hybrid isolated curved bridges", Structures Congress, Chicago, Illinois, March.
  8. Fenves, G.L. and Ellery, M. (1998), "Behavior and failure analysis of a multiple-frame highway bridge in the 1994 northridge earthquake", Pacific Earthquake Engineering Research Center, Report No. PEER 98/08, University of California, Berkeley, California.
  9. Galindo, C.M., Hayashikawa, T. and Belda, J.G. (2009), "Damage evaluation of curved steel bridges upgraded with isolation bearings and unseating prevention cable restrainers", World Acad. Sci. Eng. Tech., 59, 53-61.
  10. Kunde, M.C. and Jangid, R.S. (2003), "Seismic behavior of isolated bridges: A-state-of-the-art review", Elect. J. Struct. Eng., 3(3), 140-170.
  11. Lei, Y.H. and Chien, Y.L. (2004), "Applications of LRB and FPS to 3-D curved box bridges", Tamkang J. Sci. Eng., 7(1), 17-28.
  12. Liu, K. and Wang, L.H. (2014), "Earthquake damage of curved highway bridges in 2008 wenchuan earthquake", Adv. Mat. Res., 838-841, 1571-1576.
  13. Liu, Y., Qi, X., Wang, Y. and Chen, S. (2011), "Seismic mitigation analysis of viscous dampers for curved continuous girder bridge", Appl. Mech. Mat., 90-93, 1230-1233. https://doi.org/10.4028/www.scientific.net/AMM.90-93.1230
  14. Madhekar, S.N. and Jangid, R.S. (2011), "Seismic performance of benchmark highway bridge installed with piezoelectric friction dampers", The IES J. Part A: Civil Struct. Eng., 4(4), 191-212. https://doi.org/10.1080/19373260.2011.585789
  15. Ozbulut, O.E. and Hurlebaus, S. (2010), "Fuzzy control of piezoelectric friction dampers for seismic protection of smart base isolated buildings", Bull. Earthq. Eng., 8, 1435-1455. https://doi.org/10.1007/s10518-010-9187-5
  16. Park, Y.J., Wen, Y.K. and Ang, A.H.S. (1986), "Random vibration of hysteretic systems under bi-directional ground motions", Earthq. Eng. Struct. D., 14(4), 543-557. https://doi.org/10.1002/eqe.4290140405
  17. Robinson, W.H. (1982), "Lead-rubber hysteretic bearings suitable for protecting structures during earthquakes", Earthq. Eng. Struct. D., 10, 593-604. https://doi.org/10.1002/eqe.4290100408
  18. Robinson, W.H. and Tucker, A.G. (1977), "A lead-rubber shear damper", Bull. NZ Soc. Earthquake Eng., 10(3), 151-153.
  19. Tyler, R.G. and Robinson, W.H. (1984), "High-strain tests on lead-rubber bearings for earthquake loadings", Bull. NZ Soc. Earthq. Eng., 17(2), 90-105.
  20. Wen, Y.K. (1976), "Method for random vibrations of hysteretic systems", J. Eng. Mech.-ASCE, 102, 249-263.
  21. Williams, D. and Godden, W.G. (1976), "Multidirectional seismic response of a curved highway bridge model", Bull. NZ Soc. Earthq. Eng., 9(2), 97-114.
  22. Zhang, J., Deng, W. and Yue, Z. (2012), "Experimental Study about the Hysteretic Performance of the Pall-typed Piezoelectric Friction Damper", TOCEJ, 6, 48-54.