References
- Press release of Tohoku Electric Power, 2007, "Investigation and Preventive Steps of Vent Piping System Feedwater Heater 2 of Onagawa Nuclear Power Station Unit 2, Dec. 12th, (in Japanese).
- Heymann, F. J., 1979, "Conclusions from the ASTM interlaboratory test program with liquid impact erosion facilities", Proc. 5th Int. Conf. on Erosion by Liquid and Solid Impact, pp. 20-1-20-10.
- Sanchez-Caldera, L. E., 1984, "The Mechanism of Corrosion-Erosion in Steam Extraction Lines of Power Stations", Ph. D. Thesis. Dep. Mech. Eng., Massachusetts Institute of Technology.
- Hattori, S., Hayakawa, H. and Takinami, M., 2008, "Liquid Impingement Erosion of Steels", Proc. 13th Forefront of Power and Energy Systems Symposium, JSME, pp. 37-40 (in Japanese).
- Fujisawa, N., Yamagata, T., Hayashi, K. and Takano, T., 2012, "Experiments on Liquid Droplet Impingement Erosion by High-Speed Spray", Nucl. Eng. Des., Vol. 250, pp. 101-107. https://doi.org/10.1016/j.nucengdes.2012.06.022
- Fujisawa, N., Yamagata, T., Saito, K. and Hayashi, K., 2013, "The effect of liquid film on liquid droplet impingement erosion", Nucl. Eng. Des., Vol. 265, pp. 909-917. https://doi.org/10.1016/j.nucengdes.2013.07.039
- Sasaki, H., Iga, Y., and Ikohagi, T., 2010, "Study of Droplet Impingement Phenomena by Fluid/Solid Coupled Simulation", Proc. Joint Int. Conf. on Supercomputing in Nuclear Applications and Monte Carlo 2010, Paper No. 10189.
- Okuda, K. and Ikohagi, T., 1996, "Numerical Simulation of Collapsing Behavior of Bubble Clouds", Trans. JSME, Ser. B., Vol. 62 (603), pp. 3792-3797 (in Japanese). https://doi.org/10.1299/kikaib.62.3792
- Iga, Y. and Konno, T., 2012, "Numerical Analysis of the Influence of Acceleration on Cavitation Instabilities that arise in Cascade", International Journal of Fluid Machinery and Systems, Vol. 5, No. 1 (January - March), pp. 1-9. https://doi.org/10.5293/IJFMS.2011.5.1.001
- Brackball, J. U., Kothe, D. B. and Zemach, C., 1992, "A Continuum Method for Modeling Surface Tension", J. Comp. Phys., Vol. 100 (2), pp. 335-354. https://doi.org/10.1016/0021-9991(92)90240-Y
- Nakamori, I. and Ikohagi, T., 2002, "Numerical Method for Cavitating Flow with Phase Change", Proc. 5th JSME/KSME Fluids Eng. Conf., Paper No. 322.
- Fujikawa, S., and Akamatsu, T., 1980, "Effects of the Non-equilibrium Condensation of Vapor on the Pressure Wave Produced by the Collapse of a Bubble in a Liquid", J. Fluid Mech., Vol. 97, pp. 481-512. https://doi.org/10.1017/S0022112080002662
- Sugawara, S., 1932, "New Steam Tables", JSME, Vol. 35 (186), pp. 999-1004, (in Japanese).
- Takano, Y., Goto, T. and Nishino, S., 1998, "A Finite Volume Scheme for Elastodynamic Equations (1st Report, Algorithm for Elastodynamics)", JSME. Ser. A., Vol. 64 (626), pp. 2471-2476 (in Japanese). https://doi.org/10.1299/kikaia.64.2471
- Shima, E. and Jounouchi, T., 1994, "Role of Computational Fluid Dynamics in Aeronautical Engineering (No.12) - Formulation and Verification of Uni - Particle Upwind Schemes for the Euler Equations -", NAL-SP27, Proc. 12th NAL Symp. on Aircraft Computational Aerodynamics, pp. 255-260.
- Edwards, J. R., Franklin, R. and Liou, M., 2000, "Low-Diffusion Flux-Splitting Methods for Real Fluid Flows with Phase Transitions", AIAA J., Vol. 38 (9), 1624-1633. https://doi.org/10.2514/2.1145
- Godunov, S. K., 1959, "A Difference Method for Numerical Calculation of Discontinuous Solutions of the Equations of Hydrodynamics", Matematicheskii Sbornik, Vol. 47 (89), No. 3, pp. 271-306.
- Yasuda, K., 2004, "Mechanical Acoustics", CORONA PUBLISHING CO., LTD., Tokyo (in Japanese).
Cited by
- Research on fine boring simulation based on squeezed liquid film damper vol.2018, pp.1, 2018, https://doi.org/10.1186/s13638-018-1164-8
- Removal Mechanism of Artificial Dental Plaque by Impact of Micro-Droplets vol.8, pp.2, 2019, https://doi.org/10.1149/2.0091902jss