Structural Engineering and Mechanics

  • 제58권3호
  • /
  • Pages.515-532
  • /
  • 2016
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Post-buckling responses of elastoplastic FGM beams on nonlinear elastic foundation

  • Trinh, Thanh-Huong (Department of Architecture, College of Engineering, Nihon University) ;
  • Nguyen, Dinh-Kien (Department of Solid Mechanics, Institute of Mechanics, Vietnam Academy of Science and Technology) ;
  • Gan, Buntara S. (Department of Architecture, College of Engineering, Nihon University) ;
  • Alexandrov, S. (Laboratory of Fracture Mechanics, Institute for Problems in Mechanics)
  • 투고 : 2015.07.09
  • 심사 : 2016.02.29
  • 발행 : 2016.05.10
⟨ 이전 논문 다음 논문 ⟩

초록

The elastoplastic response of functionally graded material (FGM) beams resting on a nonlinear elastic foundation to an eccentric axial load is investigated by using the finite element method. The FGM is assumed to be formed from ceramic and metal phases with their volume fraction vary in the thickness direction by a power-law function. A bilinear elastoplastic behavior is assumed for the metallic phase, and the effective elastoplastic properties of the FGM are evaluated by Tamura-Tomota-Ozawa (TTO) model. Based on the classical beam theory, a nonlinear finite beam element taking the shift in the neutral axis position into account is formulated and employed in the investigation. An incremental-iterative procedure in combination with the arc-length control method is employed in computing the equilibrium paths of the beams. The validation of the formulated element is confirmed by comparing the equilibrium paths obtained by using the present element and the one available in the literature. The numerical results show that the elastoplastic post-buckling of the FGM beams is unstable, and the post-buckling strength is higher for the beams associated with a higher ceramic content. Different from homogeneous beams, yielding in the FGM beam occurs in the layer near the ceramic layer before in the layer near metal surface. A parametric study is carried out to highlight the effect of the material distribution, foundation support and eccentric ratio on the elastoplastic response of the beams.

키워드

참고문헌

  1. Bhattacharyya, M., Kapuria, S. and Kumar, AN. (2007), "On the stress to strain transfer ratio and elastic deflection behavior for Al/SiC functionally graded material", Mech. Adv. Struct., 14, 295-302. https://doi.org/10.1080/15376490600817917
  2. Budkowska, B.B. and Szymczak, C. (1997), "Initial post-buckling behavior of piles partially embedded in soil", Comput. Struct., 62(5), 831-835. https://doi.org/10.1016/S0045-7949(96)00302-1
  3. Chaht, F.L., Kaci, A., Houari, M.S.A., Tounsi, A., Beg, O.A. and Mahmoud, S.R. (2015), "Bending and buckling analyses of functionally graded material (FGM) size-dependent nanoscale beams including the thickness stretching effect", Steel Compos. Struct., 18(2), 425-442. https://doi.org/10.12989/scs.2015.18.2.425
  4. Chakraborty, A., Gopalakrishnan, S. and Reddy, J.R. (2003), "A new beam finite element for the analysis of functionally graded materials", Int. J. Mech. Sci., 45, 519-539. https://doi.org/10.1016/S0020-7403(03)00058-4
  5. Chebl, C. and Neal, K.W. (1984), "A finite element method for elastic-plastic beams and columns at large deflections", Comput. Struct., 18(2), 255-261. https://doi.org/10.1016/0045-7949(84)90123-8
  6. Chegenizadeh, A., Ghadimi, B., Nikraz, H. and Simsek, M. (2014), "A novel two-dimensional approach to modelling functionally graded beams resting on a soil medium", Struct. Eng. Mech., 51(5), 727-741. https://doi.org/10.12989/sem.2014.51.5.727
  7. Cook, R.D., Malkus, D.S. and Plesha, M.E. (1989), Concepts and Applications of Finite Element Analysis, 3rd edition. John Wiley & Sons, New York.
  8. Crisfield, M.A. (1991), Nonlinear Finite Element Analysis of Solids and Structures, Volume 1, Essentials, John Wiley & Sons, Chichester.
  9. Gere, J.M. and Timoshenko, S.P. (1991), Mechanics of Materials, 3rd Edition, Chapman & Hall, London.
  10. Gunes, R., Aydin, M., Kemal, A.M. and Reddy, J.N. (2011), "The elasto-plastic impact analysis of functionally graded circular plates under low-velocities", Compos. Struct., 93(2), 860-869. https://doi.org/10.1016/j.compstruct.2010.07.008
  11. Hetenyi, M. (1946), Beams on Elastic Foundation: Theory with Applications in the Fields of Civil and Mechanical Engineering, The University of Michigan Press, Ann Arbor.
  12. Huang, H. and Han, Q. (2014), "Elastoplastic buckling of axially loaded functionally graded material cylindrical shells", Compos. Struct., 117, 135-142. https://doi.org/10.1016/j.compstruct.2014.06.018
  13. Huang, Y. and Li, X.F. (2011), "Buckling analysis of non-uniform and axially graded beams with varying flexural rigidity", ASCE J. Eng. Mech., 137(1), 73-81. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000206
  14. Jahromi, B.H., Nayeb-Hashemi, H. and Vaziri, A. (2012), "Elasto-plastic stresses in a functionally graded rotating disk", ASME J. Eng Mater-T, 134(2), 021004-021011. https://doi.org/10.1115/1.4006023
  15. Jin, Z.H., Paulino, G.H. and Dodds, R.H. (2003), "Cohesive fracture modeling of elastic-plastic crack growth in functionally graded materials", Eng. Fract. Mech., 70, 1885-1912. https://doi.org/10.1016/S0013-7944(03)00130-9
  16. Kadoli, R., Akhtar, K. and Ganesan, N. (2008), "Static analysis of functionally graded beams using higherorder shear deformation beam theory", Appl. Math. Model., 32(12), 2509-2525. https://doi.org/10.1016/j.apm.2007.09.015
  17. Kang, Y.A. and Li, X.F. (2009), "Bending of functionally graded cantilever beam with power-law nonlinearity subjected to an end force". Int. J. Nonlin. Mech., 44(6), 696-703. https://doi.org/10.1016/j.ijnonlinmec.2009.02.016
  18. Kang, Y.A. and Li, X.F. (2010), "Large deflection of a non-linear cantilever functionally graded beam", J. Reinf. Plast. Compos., 29(4), 1761-1774. https://doi.org/10.1177/0731684409103340
  19. Kadoli, R., Akhtar, K., and Ganesan, N. (2008), "Static analysis of functionally graded beams using higher order shear deformation beam theory", Appl. Math. Model., 32, 2509-2525. https://doi.org/10.1016/j.apm.2007.09.015
  20. Kounadis, A.N., Mallis, J. and Sbarounis, A. (2006), "Post-buckling analysis of columns resting on an elastic foundation", Ach. Appl. Mech., 75, 395-404. https://doi.org/10.1007/s00419-005-0434-1
  21. Levyakov, S.V. (2013), "Elastica solution for thermal bending of a functionally graded beam", Acta Mech., 224(8), 1731-1740. https://doi.org/10.1007/s00707-013-0834-1
  22. Nguyen, D.K. (2004), "Post-buckling behavior of beam on two-parameter elastic foundation", Int. J. Struct. Stab. Dyn., 4(1), 21-43. https://doi.org/10.1142/S0219455404001082
  23. Nguyen, D.K., Trinh, T.H. and Gan, B.S. (2012), "Post-buckling response of elastic-plastic beam resting on an elastic foundation to eccentric axial load", IES J. Pt. A: Civil Struct. Eng., 5(1), 43-49. https://doi.org/10.1080/19373260.2012.652769
  24. Nguyen, D.K. (2013), "Large displacement response of tapered cantilever beams made of axially functionally graded material", Compos. Pt. B Eng., 55, 298-305. https://doi.org/10.1016/j.compositesb.2013.06.024
  25. Nguyen, D.K. (2014), "Large displacement behavior of tapered cantilever Euler-Bernoulli beams made of functionally graded material", Appl. Math. Comput., 237, 340-355. https://doi.org/10.1016/j.amc.2014.03.104
  26. Nguyen, D.K. and Gan, B.S. (2014), "Large deflections of tapered functionally graded beams subjected to end forces", Appl. Math. Model., 38(11-12), 3054-3066. https://doi.org/10.1016/j.apm.2013.11.032
  27. Nguyen, D.K., Gan, B.S. and Trinh, T.H. (2014), "Geometrically nonlinear analysis of planar beam and frame structures made of functionally graded material", Struct. Eng. Mech., 49(6), 727-743. https://doi.org/10.12989/sem.2014.49.6.727
  28. Patel, B.P., Ganapathi, M. and Touratier, M. (1999), "Nonlinear free flexural vibrations/post-buckling analysis of laminated orthotropic beams/columns on a two parameter elastic foundation", Compos. Struct., 46(2), 189-196. https://doi.org/10.1016/S0263-8223(99)00054-9
  29. Rajasekhara, N. N. and Venkateswara, R.G. (1996), "Free vibration and stability behavior of uniform beams and columns on nonlinear elastic foundation", Comput. Struct., 58(6), 1213-1215. https://doi.org/10.1016/0045-7949(95)00224-3
  30. Razaqpur, A.G. and Shah, K.R. (1991), "Exact analysis of beams on two-parameter elastic foundations", Int. J. Solid. Struct., 27(4), 435-451. https://doi.org/10.1016/0020-7683(91)90133-Z
  31. Tamura, I., Tomota, Y. and Ozawa, H. (1973), "Strength and ductility of Fe-Ni-C alloys composed of austenite and martensite with various strength", Proceedings of the Third International Conference on Strength of Metals and Alloys, Cambridge.
  32. Zhang, Y., Huang, H. and Han, Q. (2015), "Buckling of elastoplastic functionally graded cylindrical shells under combined compression and pressure", Compos. Pt. B Eng., 69, 120-126. https://doi.org/10.1016/j.compositesb.2014.09.024
  33. Zhaohua, F. and Cook, R.D. (1983), "Beam elements on two-parameter elastic foundations", ASCE J. Eng. Mech., 109(6), 1390-1402. https://doi.org/10.1061/(ASCE)0733-9399(1983)109:6(1390)

피인용 문헌

  1. A simple hyperbolic shear deformation theory for vibration analysis of thick functionally graded rectangular plates resting on elastic foundations vol.11, pp.2, 2016, https://doi.org/10.12989/gae.2016.11.2.289
  2. Thermal post-buckling behavior of imperfect temperature-dependent sandwich FGM plates resting on Pasternak elastic foundation vol.22, pp.1, 2016, https://doi.org/10.12989/scs.2016.22.1.091
  3. A novel quasi-3D hyperbolic shear deformation theory for functionally graded thick rectangular plates on elastic foundation vol.12, pp.1, 2016, https://doi.org/10.12989/gae.2017.12.1.009
  4. Post-buckling responses of functionally graded beams with porosities vol.24, pp.5, 2017, https://doi.org/10.12989/scs.2017.24.5.579
  5. A four variable refined nth-order shear deformation theory for mechanical and thermal buckling analysis of functionally graded plates vol.13, pp.3, 2016, https://doi.org/10.12989/gae.2017.13.3.385
  6. A new and simple HSDT for thermal stability analysis of FG sandwich plates vol.25, pp.2, 2016, https://doi.org/10.12989/scs.2017.25.2.157
  7. Free vibration of functionally graded plates resting on elastic foundations based on quasi-3D hybrid-type higher order shear deformation theory vol.20, pp.4, 2017, https://doi.org/10.12989/sss.2017.20.4.509
  8. An efficient and simple four variable refined plate theory for buckling analysis of functionally graded plates vol.25, pp.3, 2016, https://doi.org/10.12989/scs.2017.25.3.257
  9. A novel and simple higher order shear deformation theory for stability and vibration of functionally graded sandwich plate vol.25, pp.4, 2017, https://doi.org/10.12989/scs.2017.25.4.389
  10. Nonlinear static analysis of functionally graded porous beams under thermal effect vol.6, pp.4, 2017, https://doi.org/10.12989/csm.2017.6.4.399
  11. Semi analytical solution of a rigid pavement under a moving load on a Kerr foundation model vol.20, pp.5, 2018, https://doi.org/10.21595/jve.2018.20082
  12. Study on thermal buckling and post-buckling behaviors of FGM tubes resting on elastic foundations vol.66, pp.6, 2016, https://doi.org/10.12989/sem.2018.66.6.729
  13. Geometrically nonlinear analysis of functionally graded porous beams vol.27, pp.1, 2016, https://doi.org/10.12989/was.2018.27.1.059
  14. Nonlinear vibration of functionally graded nano-tubes using nonlocal strain gradient theory and a two-steps perturbation method vol.69, pp.2, 2016, https://doi.org/10.12989/sem.2019.69.2.205
  15. Vibration analysis of different material distributions of functionally graded microbeam vol.69, pp.6, 2016, https://doi.org/10.12989/sem.2019.69.6.637
  16. Optimization of flexure stiffness of FGM beams via artificial neural networks by mixed FEM vol.75, pp.5, 2020, https://doi.org/10.12989/sem.2020.75.5.633