DOI QR코드

DOI QR Code

Importance of particle shape on stress-strain behaviour of crushed stone-sand mixtures

  • Kumara, Janaka J. (Department of Civil Engineering, Tokyo University of Science) ;
  • Hayano, Kimitoshi (Department of Urban Innovation, Yokohama National University)
  • 투고 : 2014.12.09
  • 심사 : 2016.01.12
  • 발행 : 2016.04.25

초록

In ballasted railway tracks, ballast fouling due to finer material intrusion has been identified as a challenging issue in track maintenance works. In this research, deformation characteristics of crushed stone-sand mixtures, simulating fresh and fouled ballasts were studied from laboratory and a 3-D discrete element method (DEM) triaxial compression tests. The DEM simulation was performed using a recently developed DEM approach, named, Yet Another Dynamic Engine (YADE). First, void ratio characteristics of crushed stone-sand mixtures were studied. Then, triaxial compression tests were conducted on specimens with 80 and 50% of relative densities simulating dense and loose states respectively. Initial DEM simulations were conducted using sphere particles. As stress-strain behaviour of crushed stone-sand mixtures evaluated by sphere particles were different from laboratory specimens, in next DEM simulations, the particles were modeled by a clump particle. The clump shape was selected using shape indexes of the actual particles evaluated by an image analysis. It was observed that the packing behaviour of laboratory crushed stone-sand mixtures were matched well with the DEM simulation with clump particles. The results also showed that the strength properties of crushed stone deteriorate when they are mixed by 30% or more of sand, specially under dense state. The results also showed that clump particles give closer stress-strain behaviour to laboratory specimens than sphere particles.

키워드

참고문헌

  1. Al-Rousan, T., Masad, E., Tutumluer, E. and Pan, T. (2007), "Evaluation of image analysis techniques for quantifying aggregate shape characteristics", Construct. Build. Mater., 21(5), 978-990. https://doi.org/10.1016/j.conbuildmat.2006.03.005
  2. Belheine, N., Plassiard, J.-P., Donze, F,-V., Darve, F. and Seridi, A. (2009), "Numerical simulation of drained triaxial test using 3D discrete element modeling", Comput. Geotech., 36(1-2), 320-331. https://doi.org/10.1016/j.compgeo.2008.02.003
  3. Cubrinovski, M. and Ishihara, K. (2002), "Maximum and minimum void ratio characteristics of sands", Soil. Found., 42(6), 65-78. https://doi.org/10.3208/sandf.42.6_65
  4. Cundall, P.A. (1971), "A computer model for simulating progressive, large scale movements in blocky rock systems", Proceedings of Symposium of International Society of Rock Mechanics, Nancy, France, September.
  5. Cundall, P.A. and Strack, O.D.L. (1979), "A discrete numerical model for granular assemblies", Geotechnique, 29(1), 47-65. https://doi.org/10.1680/geot.1979.29.1.47
  6. Dang, H.K. and Meguid, M.A. (2010), "Algorithm to generate a discrete element specimen with predefined properties", Int. J. Geomech., 10(2), 85-91. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000028
  7. Ferreira, T. and Rasband, W. (2011), The Image J User Guide 1.44.
  8. Hossain, Z., Indraratna, B., Darve, F. and Thakur, P.K. (2007), "DEM analysis of angular ballast breakage under cyclic loading", Geomech. Geoeng., 2(3), 175-181. https://doi.org/10.1080/17486020701474962
  9. Huang, H. and Tutumluer, E. (2011), "Discrete element modeling for fouled railroad ballast", Construct. Build. Mater., 25(8), 3306-3312. https://doi.org/10.1016/j.conbuildmat.2011.03.019
  10. Indraratna, B. and Salim, W. (2005), Mechanics of Ballasted Rail Tracks-A Geotechnical Perspective, Taylor and Francis, London, UK.
  11. Indraratna, B., Ionescu, D. and Christie, H.D. (1998), "Shear behaviour of railway ballast based on large scale triaxial testing", J. Geotech. Geoenviron. Eng., 124(5), 439-449. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:5(439)
  12. Indraratna, B., Shahin, M., Rujikiatkamjorn, C. and Christie, D. (2004), "Stabilisation of ballasted rail tracks and underlying soft formation soils with geosynthetics grids and drains", Proceedings of GeoShanghai International Conference, Shanghai, China, June.
  13. Indraratna, B., Khabbaz, H., Salim, W. and Christie, D. (2006), "Geotechnical properties of ballast and the role of geosynthetics in rail track stabilisation", Ground Improve., 10(3), 91-101. https://doi.org/10.1680/grim.2006.10.3.91
  14. Indraratna, B., Ngo, N.T. and Rujikiatkamjorn, C. (2011a), "Behavior of geogrid-reinforced ballast under various levels of fouling", Geotext. Geomembr., 29(3), 313-322. https://doi.org/10.1016/j.geotexmem.2011.01.015
  15. Indraratna, B., Su, L. and Rujikiatkamjorn, C. (2011b), "A new parameter for classification and evaluation of railway ballast fouling", Can. Geotech. J., 48(2), 322-326. https://doi.org/10.1139/T10-066
  16. JGS (1998), Method for Triaxial Compression Test on Unsaturated Soils (JGS 0527), Japanese Geotechnical Society, Tokyo, Japan.
  17. Jiang, M.J., Yan, H.B., Zhu, H.H. and Utili, S. (2011), "Modeling shear behavior and strain localization in cemented sands by two-dimensional distinct element method analyses", Comput. Geotech., 38(1), 14-29. https://doi.org/10.1016/j.compgeo.2010.09.001
  18. JIS (2009), Test method for minimum and maximum densities of sands (JIS A 1224); Japanese Industrial Standards, Tokyo, Japan.
  19. Kozicki, J. and Donze, F.V. (2008), "A new open-source software developed for numerical simulations using discrete modeling methods", Comput. Method. Appl. Mech. Eng., 197(49-50), 4429-4443. https://doi.org/10.1016/j.cma.2008.05.023
  20. Kumara, G.H.A.J.J. (2013), "Development of prediction methods for deformation characteristics of fouled ballasts based on laboratory experiments and discrete element method", Ph.D. Dissertation; Yokohama National University, Yokohama, Japan.
  21. Kumara, J. and Hayano, K. (2013), "Model tests on settlement behaviour of ballasts subjected to sand intrusion and tie tamping application", Proceedings of 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris, France, September.
  22. Kumara, G.H.A.J.J., Hayano, K. and Ogiwara, K. (2012a), "Image analysis techniques on evaluation of particle size distribution of gravel", Int. J. GEOMATE, 3(1), 290-297.
  23. Kumara, G.H.A.J.J., Hayano, K., Sasaki, K. and Shigekuni, Y. (2012b), "Evaluation of void ratio characteristics of sand-gravel mixtures with different PSD curves by 3D DEM simulations", Proceedings of 14th JSCE International Summer Symposium, Nagoya, Japan, September.
  24. Kumara, J.J., Ogiwara, K., Hoshi, S. and Hayano, K. (2012c), "Evaluation on grain size distribution of railway ballast with and without sands by image analyses", Proceedings of 3rd International Conference on New Developments in Soil Mechanics and Geotechnical Engineering, Nicosia, Turkey, June.
  25. Kumara, J.J., Hayano, K. and Kikuchi, Y. (2015), "Study on settlement characteristics of fouled ballast for an effective maintenance method", Proceedings of International Conference on Geotechnical Engineering, Colombo, Sri Lanka, August.
  26. Lackenby, J., Indraratna, B., McDowell, G. and Christie, D. (2007), "Effect of confining pressure on ballast degradation and deformation under cyclic triaxial loading", Geotechnique, 57(6), 527-536. https://doi.org/10.1680/geot.2007.57.6.527
  27. Lade, P.V., Liggio, C.D. Jr. and Yamamuro, J.A. (1998), "Effects of non-plastic fines on minimum and maximum void ratios of sand", Geotech. Test. J., 21(4), 336-347. https://doi.org/10.1520/GTJ11373J
  28. Lin, X. and Ng, T.T. (1997), "A three-dimensional discrete element model using arrays of ellipsoids", Geotechnique, 47(2), 319-329. https://doi.org/10.1680/geot.1997.47.2.319
  29. Lobo-Guerrero, S. and Vallejo, L.V. (2006), "Discrete element method analysis of railtrack ballast degradation during cyclic loading", Granular Matter, 8(3-4), 195-204. https://doi.org/10.1007/s10035-006-0006-2
  30. Marschi, N.D., Chan, C.K. and Seed, H.B. (1972), "Evaluation of properties of rockfill materials", J. Soil Mech. Found. Div., 98(1), 95-114.
  31. Masad, E., Olcott, D., White, T. and Tashman, L. (2001), "Correlation of fine aggregate imaging shape indices with asphalt mixture performance", Transportation Research Record: J. Transport. Res. Board, 1757, 148-156. https://doi.org/10.3141/1757-17
  32. McDowell, G., Li, H. and Lowndes, I. (2011), "The importance of particle shape in discrete-element modelling of particle flow in a chute", Geotech. Lett., 1(3), 59-64. https://doi.org/10.1680/geolett.11.00025
  33. Pen, L.M.L., Powrie, W., Zervos, A., Ahmed, S. and Aingaran, S. (2013), "Dependence of shape on particle size for a crushed rock railway ballast", Granular Matter, 15(6), 849-961. https://doi.org/10.1007/s10035-013-0437-5
  34. Profillidis, V.A. (2000), Railway Engineering, Ashgate Publishing Limited, Aldershot, UK.
  35. Rothenburg, L. and Bathurst, R.J. (1992), "Micromechanical features of granular materials with planar elliptical particles", Geotechnique, 42(1), 79-95. https://doi.org/10.1680/geot.1992.42.1.79
  36. Rujikiatkamjorn, C., Indraratna, B., Ngo, N.T. and Coop, M. (2012), "A laboratory study of railway ballast behaviour under various fouling degree", Proceedings of 5th Asian Regional Conference on Geosynthetics, Bangkok, Thailand, December.
  37. Salot, C., Gotteland, P. and Villard, P. (2009), "Influence of relative density on granular materials behavior: DEM simulations of triaxial tests", Granular Matter, 11(4), 221-236. https://doi.org/10.1007/s10035-009-0138-2
  38. Scholtes, L., Chareyre, B., Nicot, F. and Darve, F. (2009), "Micromechanics of granular materials with capillary effects", Int. J. Eng. Sci., 47(1), 64-75. https://doi.org/10.1016/j.ijengsci.2008.07.002
  39. Selig, E.T. (1985), "Ballast for heavy duty track", Proceedings of Track Technology Conference, Nottingham, UK, July.
  40. Selig, E.T. and Waters, J.M. (1994), Track Geotechnology and Substructure Management, Thomas Telford, London, UK.
  41. Sevil, A. and Ge, L. (2012), "Cyclic behaviors of railroad ballast within the parallel gradation scaling framework", J. Mater. Civil Eng., 24(7), 797-804. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000460
  42. Smilauer, V., Catalano, E., Chareyre, B., Dorofeenko, S., Duriez, J., Gladky, A., Kozicki, J., Modenese, C., Scholtes, L., Sibille, L., Stransky, J. and Thoeni, K. (2010), Yade Reference Documentation; Yade Documentation (V. Smilauer Ed.), The Yade Project (1st Ed.). (http://yade-dem.org/doc/)
  43. Szarf, K., Combe, G. and Villard, P. (2011), "Polygons vs. clumps of discs: A numerical study of the influence of grain shape on the mechanical behaviour of granular materials", Powder Technol., 208(2), 279-288. https://doi.org/10.1016/j.powtec.2010.08.017
  44. Thakur, P.K., Vinod, J.S. and Indraratna, B. (2010), "Effect of particle breakage on cyclic densification of ballast: a DEM approach", Proceedings of IOP Conference Series: Materials Science and Engineering, Sydney, Australia, July.
  45. Thakur, P.K., Vinod, B. and Indraratna, B. (2012), "Effect of confining pressure and frequency on the deformation of ballast", Geotechnique, 63(9), 786-790.
  46. Vallerga, B.A., Seed, H.B., Monismith, C.L. and Cooper, R.S. (1957), "Effect of shape, size and surface roughness of aggregate particles on the strength of granular materials", ASTM Special Technical Publication, 212, 63-74.
  47. Widlinski, L., Kozicki, J. and Tejchman, J. (2009), "Numerical simulations of triaxial test with sand using DEM", Arch. Hydro-Eng. Environ. Eng., 56(3-4), 149-171.

피인용 문헌

  1. A review on modelling and monitoring of railway ballast vol.4, pp.3, 2017, https://doi.org/10.12989/smm.2017.4.3.195
  2. Experimental investigation of effects of sand contamination on strain modulus of railway ballast vol.14, pp.6, 2018, https://doi.org/10.12989/gae.2018.14.6.563
  3. Experimental study on crushable coarse granular materials during monotonic simple shear tests vol.15, pp.1, 2016, https://doi.org/10.12989/gae.2018.15.1.687
  4. Applicability of exponential stress-strain models for carbonate rocks vol.15, pp.3, 2016, https://doi.org/10.12989/gae.2018.15.3.919
  5. 3D stress-fractional plasticity model for granular soil vol.17, pp.4, 2016, https://doi.org/10.12989/gae.2019.17.4.385
  6. Simple stress-strain model of very strong limestones and dolomites for engineering practice vol.5, pp.4, 2019, https://doi.org/10.1007/s40948-019-00115-2
  7. Efficient flexible boundary algorithms for DEM simulations of biaxial and triaxial tests vol.23, pp.3, 2020, https://doi.org/10.12989/gae.2020.23.3.189
  8. DEM study on effects of fabric and aspect ratio on small strain stiffness of granular soils vol.24, pp.1, 2016, https://doi.org/10.12989/gae.2021.24.1.057
  9. Effect of underground stress transfer through artificial manipulation of particle size distribution vol.26, pp.2, 2016, https://doi.org/10.12989/gae.2021.26.2.205