Geomechanics and Engineering

  • 제10권4호
  • /
  • Pages.437-454
  • /
  • 2016
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A fully coupled thermo-poroelastoplasticity analysis of wellbore stability

  • Zhu, Xiaohua (School of Mechatronic Engineering, Southwest Petroleum University) ;
  • Liu, Weiji (School of Mechatronic Engineering, Southwest Petroleum University) ;
  • Zheng, Hualin (School of Mechatronic Engineering, Southwest Petroleum University)
  • 투고 : 2015.04.21
  • 심사 : 2016.01.07
  • 발행 : 2016.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Wellbore instability problem is one of the main problems that met frequently during drilling, particularly in high temperature, high pressure (HPHT) formations. There are large amount of researches about wellbore stability in HPHT formations, which based on the thermo-poroelastic theory and some achievements were obtained; however, few studies have investigated on the fully coupled thermo-poroelastoplasticity analysis of wellbore stability, especially the analysis of wellbore stability while the filter cake formed. Therefore, it is very necessary to do some work. In this paper, the three-dimensional wellbore stability model which overall considering the effects of fully coupled thermo-poroelastoplasticity and filter cake is established based on the finite element method and Drucker-Prager failure criterion. The distribution of pore pressure, wellbore stress and plastic deformation under the conditions of different mud pressures, times and temperatures have been discussed. The results obtained in this paper can offer a great help on understanding the distribution of pore pressure and wellbore stress of wellbore in the HPHT formation for drilling engineers.

키워드

과제정보

연구 과제 주관 기관 : Natural Science Fund

참고문헌

  1. Abolmaali, A. and Kararam, A. (2009), "Nonlinear finite-element-based investigation of the effect of bedding thickness on buried concrete pipe", J. Transport. Eng., 136(9), 793-799. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000135
  2. Biot, M.A. (1941), "General theory of three-dimensional consolidation", J. Appl. Phys., 12(2), 155-164. https://doi.org/10.1063/1.1712886
  3. Cai, M.F., He, M.C. and Liu, D.Y. (2002), Rock Mechanics and Engineering, Beijing, China.
  4. Chen, G. and Ewy, R.T. (2004), "Thermoporoelastic effect on wellbore stresses in permeable rocks", ARMA-04-467, Proceedings of the 6th North America Rock Mechanics Symposium (NARMS), American Rock Mechanics Association, Houston, TX, USA, June.
  5. Chen, G., Chenevert, M.E., Sharma, M.M. and Yu, M. (2003), "A study of wellbore stability in shales including poroelastic, chemical, and thermal effects", J. Petrol. Sci. Eng., 38(3), 167-176. https://doi.org/10.1016/S0920-4105(03)00030-5
  6. Cui, L., Cheng, A.H.D. and Abousleiman, Y. (1997), "Poroelastic solution for an inclined borehole", J. Transport. Eng., 64(1), 32-38.
  7. Cui, L., Ekbote, S., Abousleiman, Y. and Zaman, M.M. (1998), "Borehole stability analyses in fluid saturated formations with impermeable walls", Int. J. Rock Mech. Min. Sci., 35(4), 582-583. https://doi.org/10.1016/S0148-9062(98)00077-1
  8. Cui, L., Abousleiman, Y., Cheng, A.H. and Roegiers, J.C. (1999), "Time-dependent failure analysis of inclined boreholes in fluid-saturated formations", J. Energy Resour. Technol., 121(1), 31-39. https://doi.org/10.1115/1.2795057
  9. Chen, G. and Ewy, R.T. (2005), "Thermoporoelastic effect on wellbore stability", SPE Journal, 10(2), 121-129. https://doi.org/10.2118/89039-PA
  10. Chen, M., Jing, Y. and Zhang, G.Q. (2008), Petroleum Engineering Rock Mechanics, Beijing, China.
  11. Detournay, E. and Cheng, A.H.D. (1988), "Poroelastic response of a borehole in a non-hydrostatic stress field", Int. J. Rock Mech. Min. Sci. Geomech. Abstracts, 25(3), 171-182. https://doi.org/10.1016/0148-9062(88)92299-1
  12. Diek, A., White, L., Roegiers, J.C. and Blankenship, D. (2012), "A fully coupled thermoporoelastic model for drilling in HPHT formations", Proceedings of the 12th ISRM Congress, International Society for Rock Mechanics, Beijing, China, October.
  13. Gelet, R., Loret, B. and Khalili, N. (2012), "Borehole stability analysis in a thermoporoelastic dual-porosity medium", Int. J. Rock Mech. Min. Sci., 50(1), 65-76. https://doi.org/10.1016/j.ijrmms.2011.12.003
  14. Gomar, M., Goodarznia, I. and Shadizadeh, S.R. (2014), "A transient fully coupled thermo-poroelastic finite element analysis of wellbore stability", Arab. J. Geosci., 8(6), 3855-3865. https://doi.org/10.1007/s12517-014-1461-4
  15. Jia, S., Ran, X., Wang, Y., Xiao, T. and Tan, X. (2012), "Fully coupled thermal-hydraulic-mechanical model and finite element analysis for deformation porous media", Chinese J. Rock Mech. Eng., 31(supp.2), 3547-3556.
  16. Muller, A.L., do Amaral Vargas, E., Vaz, L.E. and Goncalves, C.J. (2009), "Three-dimensional analysis of boreholes considering spatial variability of properties and poroelastoplasticity", J. Petrol. Sci. Eng., 68(3), 268-276. https://doi.org/10.1016/j.petrol.2009.06.021
  17. Palciauskas, V.V. and Domenico, P.A. (1982), "Characterization of drained and undrained response of thermally loaded repository rocks", Water Resour. Res., 18(2), 281-290. https://doi.org/10.1029/WR018i002p00281
  18. Rice, J.R. and Cleary, M.P. (1976), "Some basic stress diffusion solutions for fluid-saturated elastic porous media with compressible constituents", Review. Geophys., 14(2), 227-241. https://doi.org/10.1029/RG014i002p00227
  19. Santarelli, F.J., Brown, E.T. and Maury, V. (1986), "Analysis of borehole stresses using pressure-dependent, linear elasticity", Int. J. Rock Mech. Min. Sci. Geomech. Abstracts, 23(6), 445-449. https://doi.org/10.1016/0148-9062(86)92310-7
  20. Shahabadi, H., Yu, M., Miska, S.Z., Takach, N.E. and Chen, G. (2006), "Modeling transient thermoporoelastic effects on 3D wellbore stability", SPE 103159, Proceedings of SPE Annual Technical Conference and Exhibition, San Antonio, TX, USA, September.
  21. Sheng, J.C., Liao, Q.L., Liu, J.S. and Baoyu, S.U. (2008), "Analysis of coupled porothermoelastic response of a wellbore by using a femlab-based simulator", Eng. Mech., 25(2), 219-223.
  22. Sheng, J.C., Liu, J.S., Xu, X.C. and Zhan, M.L. (2009), "A coupled porochemothermoelastic model for a borehole in shales", Eng. Mech., 26(12), 240-245.
  23. Tao, Q. and Ghassemi, A. (2010), "Poro-thermoelastic borehole stress analysis for determination of the in situ stress and rock strength", Geothermics, 39(3), 250-259. https://doi.org/10.1016/j.geothermics.2010.06.004
  24. Wang, Y. and Dusseault, M.B. (2003), "A coupled conductive-convective thermo-poroelastic solution and implications for wellbore stability", J. Petrol. Sci. Eng., 38(3), 187-198. https://doi.org/10.1016/S0920-4105(03)00032-9
  25. Wang, X., Cheng, Y. and Zhao, Y. (2007), "The effect of temperature on wellbore stability in shales during drilling", Petrol. Drill. Techniq., 35(2), 42-45.
  26. Wang, M., Zhang, Z. and Ma, Q. (2014), "Influence of thermo-seepage coupling effect on wellbore stress under the underbalanced condition", Drill. Production Technol., 37(1), 1-3.
  27. Wu, C., Chen, M. and Jin, Y. (2009), "A prediction method of borehole stability based on seismic attribute technology", J. Petrol. Sci. Eng., 65(3-4), 208-216. https://doi.org/10.1016/j.petrol.2008.12.033
  28. Zhai, Z., Zaki, K.S., Marinello, S.A. and Abou-Sayed, A.S. (2009), "Coupled thermoporomechanical effects on borehole stability", SPE 123427, Proceedings of SPE Annual Technical Conference and Exhibition, New Orleans, LA, USA, October.
  29. Zhang, J., Lang, J. and Standifird, W. (2009), "Stress, porosity, and failure-dependent compressional and shear velocity ratio and its application to wellbore stability", J. Petrol. Sci. Eng., 69(3), 193-202. https://doi.org/10.1016/j.petrol.2009.08.012
  30. Zhu, X. and Liu, W. (2013), "The effects of drill string impacts on wellbore stability", J. Petrol. Sci. Eng., 109, 217-229. https://doi.org/10.1016/j.petrol.2013.08.004
  31. Zhu, Y.W., Cai, Y.Q. and Xu, H. (2005), ABAQUS and Analyses of Rock Engineering, Hong Kong.

피인용 문헌

  1. Geomechanical study of well stability in high-pressure, high-temperature conditions vol.16, pp.3, 2016, https://doi.org/10.12989/gae.2018.16.3.331
  2. Temperature distribution during heavy oil thermal recovery considering the effect of insulated tubing vol.19, pp.6, 2016, https://doi.org/10.12989/gae.2019.19.6.523
  3. Quantitative risk assessment for wellbore stability analysis using different failure criteria vol.24, pp.3, 2016, https://doi.org/10.12989/gae.2021.24.3.281