Advances in Computational Design

  • 제1권2호
  • /
  • Pages.207-220
  • /
  • 2016
  • /
  • 2383-8477(pISSN)
  • /
  • 2466-0523(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of stiffened element and edge stiffener in strength and behaviour of cold formed steel built-up beams

  • Manikandan, P. (Department of Civil Engineering, K.S.Rangasamy College of Technology) ;
  • Sukumar, S. (Department of Civil Engineering, Government College of Engineering)
  • 투고 : 2016.02.16
  • 심사 : 2016.03.31
  • 발행 : 2016.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

The aim of this study is to investigate the effect of stiffened element and edge stiffener in the behaviour and flexural strength of built-up cold-formed steel beams. An experimental and analytical analysis of CFS channel sections in four different geometries is conducted, including simple channel sections, a stiffened channel section with or without edge stiffeners. Nonlinear finite element models are developed using finite element analysis software package ANSYS. The FEA results are verified with the experimental results. Further, the finite element model is used for parametric studies by varying the depth, thickness, and the effect of stiffened element, edge stiffener and their interaction with compression flanges on stiffened built-up cold-formed steel beams with upright edge stiffeners. In addition, the flexural strength predicted by the finite element analysis is compared with the design flexural strength calculated by using the North American Iron and Steel Institute Specifications for cold-formed steel structures (AISI: S100-2007) and suitable suggestion is made.

키워드

참고문헌

  1. AISI: S100-2007 (2007), "Specification for the design of cold-formed steel structural members", American Iron and steel Institute.
  2. Anapayan, T., Mahendran, M. and Mahaarachchi, D. (2011), "Lateral distortional tests of a new hollow flange channel beam", Thin wall. Struct, 49(1), 13-25. https://doi.org/10.1016/j.tws.2010.08.003
  3. Desmond, T.P., Pekoz, T. and winter, G. (1981), "Edge stiffeners for thin-walled members", J. Struct. Eng., ASCE, 107(2), 329-353.
  4. Haidarali, M.R. and Nethercot, D.A. (2012), "Local and distortional buckling of cold-formed steel beams with both edge and intermediate stiffeners in their compression flanges", Thin Wall. Struct., 54, 106-112. https://doi.org/10.1016/j.tws.2012.02.013
  5. Haidarali, M.R. and Nethercot, D.A. (2012), "Local and distortional buckling of cold-formed steel beams with edge stiffened flanges", Thin Wall. Struct., 73, 31-42.
  6. Huang, Y. and Young, B. (2013), "Experimental and numerical investigation of cold-formed lean duplex stainless steel flexural members", Thin Wall. Struct., 73, 216-228. https://doi.org/10.1016/j.tws.2013.07.019
  7. Kankanamge, N.D. and Mahendran, M. (2012), "Behaviour and design of cold-formed steel beams subject to lateral-torsional buckling'', Thin Wall. Struct., 51, 25-38. https://doi.org/10.1016/j.tws.2011.10.012
  8. Maduliat, S., Bambach, M.R. and Zhao, X.L. (2012a), "Inelastic behaviour and design of cold-formed channel sections in bending", Thin Wall. Struct., 51, 158-166. https://doi.org/10.1016/j.tws.2011.10.011
  9. Maduliat, S., Mendis, P. and Ngo, T.D. (2015), "Failure modes and buckling coefficient of partially stiffened cold-formed sections in bending", Thin Wall. Struct., 111, 21-30.
  10. Manikandan, P., Sukumar, S. and Balaji, T.U. (2014), "Effective shaping of cold-formed thin-walled built-up beams in pure bending", Arab J. Sci. Eng., 39(8), 6043-6054. https://doi.org/10.1007/s13369-014-1261-x
  11. Manikandan, P. and Sukumar, S. (2015), "Behaviour of stiffened cold-formed steel built-up sections with complex edge stiffeners under bending", KSCE J. Civ. Eng., 19(7), 2108-2115. https://doi.org/10.1007/s12205-015-1221-3
  12. Naderian, H.R., Ronagh, H.R. and Azhari, M. (2014), "Elastic distortional buckling of doubly symmetric steel I-section beams with slender webs", Thin Wall. Struct., 84, 289-301. https://doi.org/10.1016/j.tws.2014.05.010
  13. Pan, C.L. and Yu, W.W. (2002), "Bending strength of hybrid cold-formed steel beams", Thin Wall. Struct., 40(5), 399-414. https://doi.org/10.1016/S0263-8231(02)00004-6
  14. Sabbagh, A.P., Petkovski, M., Pilakoutas, K. and Mirghaderi, R. (2011), "Ductile moment-resisting frames using cold-formed steel sections: An analytical investigation", Thin Wall. Struct., 67(4), 634-646.
  15. Wang, H. and Zhang, Y. (2009), "Experimental and numerical investigation of cold-formed steel c-section flexural members", Thin Wall. Struct., 65(5), 1225-1235.
  16. Young, B. and Ren, W. (2006), "Finite-element simulation and design of cold-formed steel channels subjected to web crippling", J. Struct. Eng., ASCE, 132(12), 1967-1974. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:12(1967)
  17. Yu, C. and Schafer, B.W. (2003), "Local buckling tests on cold-formed steel beams", J. Struct. Eng., ASCE, 129(12), 1596-1606. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:12(1596)
  18. Yu, C. and Schafer, B.W. (2006), "Distortional buckling tests on cold-formed steel beams", J. Struct. Eng., ASCE, 132(4), 515-528. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:4(515)

피인용 문헌

  1. Investigation on cold-formed steel lipped channel built-up I beam with intermediate web stiffener vol.11, pp.1, 2019, https://doi.org/10.1007/s40091-019-0220-x
  2. Investigation on cold-formed steel built-up new innovative hat-shaped closed section under bending vol.11, pp.suppl1, 2016, https://doi.org/10.1007/s40091-019-00250-w