Structural Engineering and Mechanics

  • 제58권2호
  • /
  • Pages.347-378
  • /
  • 2016
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

The influence of the initial stresses on Lamb wave dispersion in pre-stressed PZT/Metal/PZT sandwich plates

  • Kurt, Ilkay (Department of Mechanical Engineering, Yildiz Technical University) ;
  • Akbarov, Surkay D. (Department of Mechanical Engineering, Yildiz Technical University) ;
  • Sezer, Semih (Department of Mechanical Engineering, Yildiz Technical University)
  • 투고 : 2015.07.14
  • 심사 : 2016.02.02
  • 발행 : 2016.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Within the scope of the plane-strain state, by utilizing the three-dimensional linearized theory of elastic waves in initially stressed piezoelectric and elastic materials, Lamb wave propagation and the influence of the initial stresses on this propagation in a sandwich plate with pre-stressed piezoelectric face and pre-stressed metal elastic core layers are investigated. Dispersion equations are derived for the extensional and flexural Lamb waves and, as a result of numerical solution to these equations, the corresponding dispersion curves for the first (fundamental) and second modes are constructed. Concrete numerical results are obtained for the cases where the face layers' materials are PZT-2 or PZT-6B, but the material of the middle layer is Steel (St) or Aluminum (Al). Sandwich plates PZT-2/St/PZT-2, PZT-2/Al/PZT-2, PZT-6B/St/PZT-6B and PZT-6B/Al/PZT-6B are examined and the influence of the problem parameters such as piezoelectric and dielectric constants, layer thickness ratios and third order elastic constants of the St and Al on the effects of the initial stresses on the wave propagation velocity is studied.

키워드

참고문헌

  1. Akbarov, S.D. (2015), Dynamics of Pre-Strained Bi-Material Elastic Systems, Springer.
  2. Akbarov, S.D., Agasiyev, E.R. and Zamanov, A.D. (2011), "Wave propagation in a pre-strained compressible elastic sandwich plate", Eur. J. Mech. A-Solid., 30(3), 409-422.
  3. Akbarov, S.D., Kurt, I. and Sezer, S.(2014), "Dispersion of the near-surface waves in a system consisting of a pre-stressed piezoelectric covering layer and a pre-stressed metallic half-plane", In: Book of abstract of the XVIII conference mechanics of composite materials, Riga, Latvia, p 23, 2-6 June.
  4. Akbarov, S.D., Zamanov, A.D. and Agasiyev, E.R. (2008) "On the propagation of Lamb waves in a sandwich plate made of compressible materials with finite initial strains", Mech. Comp. Mater., 44(2), 155-164. https://doi.org/10.1007/s11029-008-9001-5
  5. Azrar, L., Belouettar, S. and Wauer, J. (2008), "Nonlinear vibration analysis of actively loaded sandwich piezoelectric beams with geometric imperfections", Comput. Struct., 86(23), 2182-2191. https://doi.org/10.1016/j.compstruc.2008.06.006
  6. Bassiouny, E. (2012), "Thermo-elastic behavior of thin sandwich panel made of piezoelectric layers", Appl. Math. Comput., 218(20), 10009-10021. https://doi.org/10.1016/j.amc.2012.03.029
  7. Biot, M. A. (1965), Mechanics of Incremental Deformation, Wiley, New York.
  8. Gupta, S., Majhi, D.K., Kundu, S. and Vishwakarma S K. (2012), "Propagation of torsional surface waves in a homogeneous layer of finite thickness over an initially stressed heterogeneous half-space", Appl. Math. Comput., 218(9), 5655-5664. https://doi.org/10.1016/j.amc.2011.11.060
  9. Guz, A.N. (2004), Elastic Waves in Bodies with Initial (Residual) Stresses, A.C.K., Kiev.
  10. Guz, A.N. and Makhort, F.G. (2000), "The physical fundamentals of the ultrasonic analysis of solids", Int. Appl. Mech., 36(9), 1119-1148. https://doi.org/10.1023/A:1009442132064
  11. Jin, J., Wang, Q. and Quek, S.T. (2002), "Lamb wave propagation in a metallic semi-infinite medium covered with piezoelectric layer", Int. J. Solids Struct., 39(9), 2547-2556. https://doi.org/10.1016/S0020-7683(02)00091-4
  12. Loja, M.A.R., Soares, C.M.M. and Barbosa, J.I. (2013), "Analysis of functionally graded sandwich plate structures with piezoelectric skins, using B-spline finite strip method", Compos. Struct., 96, 606-615. https://doi.org/10.1016/j.compstruct.2012.08.010
  13. Ng, C. T. (2015), "A two-stage approach for quantitative damage imaging in metallic plates using Lamb waves", Earthq. Struct., 8(4), 821-841. https://doi.org/10.12989/eas.2015.8.4.821
  14. Pang, Y., Liu, J.X., Wang, Y.S., and Zhao, X.F. (2008), "Propagation of Rayleigh-type surface waves in a transversely isotropic piezoelectric layer on a piezomagnetic half-space", J. Appl. Phys., 103(7), 074901. https://doi.org/10.1063/1.2902501
  15. Wang, Q., Yuan, S., Hong, M., and Su, Z. (2015), "On time reversal-based signal enhancement for active lamb wave-based damage identification", Smart. Struct. Syst., 15(6), 1463-1479. https://doi.org/10.12989/sss.2015.15.6.1463
  16. Yang, J. (2005), An Introduction to the Theory of Piezoelectricity, Springer.

피인용 문헌

  1. Study of torsional wave in a poroelastic medium sandwiched between a layer and a half-space of heterogeneous dry sandy media vol.28, pp.1, 2018, https://doi.org/10.1080/17455030.2017.1335915
  2. Effect of central and non-central frequency components on the quality of damage imaging vol.8, pp.1, 2018, https://doi.org/10.1007/s13349-017-0258-z
  3. EFFECT OF UNIAXIAL INITIAL STRESSES, PIEZOELECTRICITY AND THIRD ORDER ELASTIC CONSTANTS ON THE NEAR-SURFACE WAVES IN A STRATIFIED HALF-PLANE vol.3, pp.4, 2016, https://doi.org/10.18186/journal-of-thermal-engineering.330187
  4. Looseness Monitoring of Bolted Spherical Joint Connection Using Electro-Mechanical Impedance Technique and BP Neural Networks vol.19, pp.8, 2019, https://doi.org/10.3390/s19081906
  5. Damage Detection of Common Timber Connections Using Piezoceramic Transducers and Active Sensing vol.19, pp.11, 2016, https://doi.org/10.3390/s19112486
  6. Structural Health Monitoring of Timber Using Electromechanical Impedance (EMI) Technique vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/1906289