DOI QR코드

DOI QR Code

Statistical flexural toughness modeling of ultra high performance concrete using response surface method

  • Mosabepranah, Mohammad A. (Department of Civil Engineering, Eastern Mediterranean University (EMU)) ;
  • Eren, Ozgur (Department of Civil Engineering, Eastern Mediterranean University (EMU))
  • 투고 : 2015.08.14
  • 심사 : 2016.02.04
  • 발행 : 2016.04.25

초록

This paper aims to model the effects of five different variables which includes: cement content (C), the steel fiber amount (F), the silica fume amount (SF), the superplasticizer (SP), the silica fume amount (SF), and the water to cementitious ratio (w/c) on 28 days flexural toughness of Ultra High Performance Concrete (UHPC) as well as, a study on the variable interactions and correlations by using analyze of variance (ANOVA) and response surface methodology (RSM). The variables were compared by fine aggregate mass. The model will be valid for the mixes with 0.18 to 0.32 w/c ratio, 4 to 8 percent steel fiber, 7 to 13 percent cement, 15 to 30 percent silica fume, and 4 to 8 percent superplasticizer by fine aggregate mass.

키워드

참고문헌

  1. Alsadey, S. (2012), "Influence of superplasticizer on strength of concrete", Int. J. Res. Eng. Tech. (IJRET), 1(3), 164-166. https://doi.org/10.15623/ijret.2012.0102016
  2. ASTM C136 / C136M-14 (2014), Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, ASTM International, West Conshohocken, PA.
  3. ASTM C33-03 (2004), Standard Specification for Concrete Aggregates, Standard Designation C33-03, ASTM International, West Conshohocken, PA.
  4. ASTM A820 / A820M-11 (2011), Standard Specification for Steel Fibers for Fiber-Reinforced Concrete, ASTM International, West Conshohocken, PA.
  5. ASTM C1609 / C1609M-12 (2011), Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading), ASTM International, West Conshohocken, PA.
  6. Barnett, S.J., Lataste, J.F., Parry, T., Millard, S.G. and Soutsos, M.N. (2010), "Assessment of fibre orientation in ultra high performance fibre reinforced concrete and its effect on flexural strength", Mater. Struct., 43(7), 1009-1023. https://doi.org/10.1617/s11527-009-9562-3
  7. EN, S. 934-2 (2009), Admixtures for concrete, mortar and grout. Concrete admixtures, Definitions, requirements, conformity, marking and labelling, London.
  8. EN, T. 197-1 (2012), Cement-Part 1: Composition, specifications and conformity criteria for common cements, Turkish Standard Institution, Ankara.
  9. Mohammed, B.S., Abdullahi, M. and Hoong, C.K. (2014), "Statistical models for concrete containing wood chipping as partial replacement to fine aggregate", Constr. Build. Mater., 55, 13-19. https://doi.org/10.1016/j.conbuildmat.2014.01.021
  10. Ma, J., Orgass, M., Dehn, F., Schmidt, D. and Tue, N.V. (2004), "Comparative investigations on ultra-high performance concrete with and without coarse aggregates", Proceedings International Symposium on Ultra High Performance Concrete (UHPC), Kassel, Germany.
  11. Marar, K., Eren, O. and Yitmen, I. (2011), "Compression specific toughness of normal strength steel fiber reinforced concrete (NSSFRC) and high strength steel fiber reinforced concrete (HSSFRC)", Mater. Res., 14(2), 239-247. https://doi.org/10.1590/S1516-14392011005000042
  12. Maca, P., Sovjak, R. and Konvalinka, P. (2014), "Mix design of UHPFRC and its response to projectile impact", Int. J. Impact Eng., 63, 158-163. https://doi.org/10.1016/j.ijimpeng.2013.08.003
  13. Pyo, S., Wille, K., El-Tawil, S. and Naaman, A.E. (2015), "Strain rate dependent properties of ultra high performance fiber reinforced concrete (UHP-FRC) under tension", Cement Concrete Compos., 56, 15-24. https://doi.org/10.1016/j.cemconcomp.2014.10.002
  14. Tuan, B.L.A., Tesfamariam, M.G., Hwang, C.L., Chen, C.T., Chen, Y.Y. and Lin, K.L. (2014), "Effect of fiber type and content on properties of high-strength fiber reinforced self-consolidating concrete", Comput. Concrete, 14(3), 299-313. https://doi.org/10.12989/cac.2014.14.3.299
  15. Wang, X.Y. (2014), "Properties prediction of ultra high performance concrete using blended cement hydration model", Constr. Build. Mater., 64, 1-10. https://doi.org/10.1016/j.conbuildmat.2014.04.084
  16. Wille, K. and Boisvert-Cotulio, C. (2015), "Material efficiency in the design of ultra-high performance concrete", Constr. Build. Mater., 86, 33-43. https://doi.org/10.1016/j.conbuildmat.2015.03.087
  17. Yoo, D.Y., Lee, J.H. and Yoon, Y.S. (2013), "Effect of fiber content on mechanical and fracture properties of ultra high performance fiber reinforced cementitious composites", Compos. Struct., 106, 742-753. https://doi.org/10.1016/j.compstruct.2013.07.033
  18. Yu, R., Spiesz, P. and Brouwers, H.J.H. (2014), "Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)", Cement Concrete Res., 56, 29-39. https://doi.org/10.1016/j.cemconres.2013.11.002
  19. Zhang, P., Zhao, Y.N., Li, Q.F., Wang, P. and Zhang, T.H. (2014), "Flexural toughness of steel fiber reinforced high performance concrete containing Nano-$SiO_2$ and fly ash", Sci. World J., Article ID 403743, 11.
  20. Wille, K., Naaman, A.E., El-Tawil, S. and Parra-Montesinos, G.J. (2012), "Ultra-high performance concrete and fiber reinforced concrete: achieving strength and ductility without heat curing", Mater. Struct., 45(3), 309-324. https://doi.org/10.1617/s11527-011-9767-0
  21. Wu, Z., Shi, C., He, W. and Wu, L. (2016), "Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete", Constr. Build. Mater., 103, 8-14. https://doi.org/10.1016/j.conbuildmat.2015.11.028
  22. Yu, R., Spiesz, P. and Brouwers, H.J.H. (2014), "Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)", Cement Concrete Res., 56, 29-39. https://doi.org/10.1016/j.cemconres.2013.11.002

피인용 문헌

  1. An evolutionary system for the prediction of high performance concrete strength based on semantic genetic programming vol.19, pp.6, 2017, https://doi.org/10.12989/cac.2017.19.6.651
  2. Statistical models for mechanical properties of UHPC using response surface methodology vol.19, pp.6, 2016, https://doi.org/10.12989/cac.2017.19.6.667
  3. The discrete element method simulation and experimental study of determining the mode I stress-intensity factor vol.66, pp.3, 2018, https://doi.org/10.12989/sem.2018.66.3.379
  4. Experimental investigating the properties of fiber reinforced concrete by combining different fibers vol.25, pp.6, 2020, https://doi.org/10.12989/cac.2020.25.6.509
  5. Relationship between point load index and mode II fracture toughness of granite vol.28, pp.1, 2021, https://doi.org/10.12989/cac.2021.28.1.025
  6. Design of sustainable ultra-high performance concrete: A review vol.307, pp.None, 2016, https://doi.org/10.1016/j.conbuildmat.2021.124643
  7. Evaluation and Multi-Objective Optimization of Lightweight Mortars Parameters at Elevated Temperature via Box-Behnken Optimization Approach vol.14, pp.23, 2021, https://doi.org/10.3390/ma14237405