Computers and Concrete

  • 제17권4호
  • /
  • Pages.435-453
  • /
  • 2016
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Optimum design of RC shallow tunnels in earthquake zones using artificial bee colony and genetic algorithms

  • Ozturk, Hasan Tahsin (Karadeniz Technical University, Faculty of Technology, Department of Civil Engineering) ;
  • Turkeli, Erdem (Provincial Organization of Ministry of Environment and Urbanization) ;
  • Durmus, Ahmet (Nuh Naci Yazgan University, Faculty of Engineering, Department of Civil Engineering)
  • 투고 : 2015.10.06
  • 심사 : 2016.01.20
  • 발행 : 2016.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

The main purpose of this study is to perform optimum cost design of cut and cover RC shallow tunnels using Artificial bee colony and genetic algorithms. For this purpose, mathematical expressions of objective function, design variables and constraints for the design of cut and cover RC shallow tunnels were determined. By using these expressions, optimum cost design of the Trabzon Kalekapisi junction underpass tunnel was carried out by using the cited algorithms. The results obtained from the algorithms were compared with the results obtained from traditional design and remarkable saving from the cost of the tunnel was achieved.

키워드

과제정보

연구 과제 주관 기관 : Karadeniz Technical University

참고문헌

  1. AASHTO-HB-17 (2002), Standard Specifications for Highway Bridges, American Association of State and Highway Transportation Officials, Washington.
  2. Akay, B. (2009), "The performance analysis of artificial bee colony algorithm in numerical optimization problems", Ph.D. Dissertation, Erciyes University, Kayseri.
  3. Akin, A. (2010), "Optimum design of reinforced concrete plane frames using harmony search algorithm", Ph.D. Dissertation, Middle East Technical University, Ankara.
  4. Akin, A. and Saka, M.P. (2010a), "Optimum design of concrete cantilever retaining walls using harmony search algorithm", Proceedings of the 9th International Congress on Advances in Civil Engineering, Trabzon, Turkey, September.
  5. Akin, A. and Saka, M.P. (2010b), "Optimum design of short rc columns subjected to axial force and uniaxial/biaxial bending using harmony search algorithm", Proceedings of the 9th International Congress on Advances in Civil Engineering, Trabzon, Turkey, September.
  6. Aydin, E., Sonmez, M. and Karabork, T. (2015), "Optimal placement of elastic steel diagonal braces using Artificial Bee Colony algorithm", Steel Compos. Struct., 19(2), 349-368. https://doi.org/10.12989/scs.2015.19.2.349
  7. Babu, G.L.S. and Basha, B.M. (2008), "Optimum design of cantilever retaining walls using target reliability approach", Int. J. Geomech., 8(4), 240-252. https://doi.org/10.1061/(ASCE)1532-3641(2008)8:4(240)
  8. Balling, R.J. and Yao, X. (1997), "Optimization of reinforced concrete frames", J. Struct. Eng., 123(2), 193-202. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:2(193)
  9. Biondini, F. and Frangopol, D.M. (2009), "Lifetime reliability-based optimization of reinforced concrete cross-sections under corrosion", Struct. Safe., 31(6), 483-489. https://doi.org/10.1016/j.strusafe.2009.06.008
  10. Camp, C.V., Pezeshk, S. and Hansson, H. (2003), "Flexural design of reinforced concrete frames using a genetic algorithm", J. Struct. Eng., 129(1), 105-115. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:1(105)
  11. Carbonell, A., Gonzalez-Vidosa, F. and Yepes, V. (2011), "Design of reinforced concrete road vaults by heuristic optimization", Adv. Eng. Softw., 42(4), 151-159. https://doi.org/10.1016/j.advengsoft.2011.01.002
  12. Ceranic, B., Fryer, C. and Baines, R.W. (2001), "An application of simulated annealing to the optimum design of reinforced concrete retaining structures", Comput. Struct., 79(17), 1569-1581. https://doi.org/10.1016/S0045-7949(01)00037-2
  13. Chakrabarty, B.K. (1992), "Models for optimal design of reinforced concrete beams", Comput. Struct., 42(3), 447-451. https://doi.org/10.1016/0045-7949(92)90040-7
  14. Choi, C.K. and Kwak, H.G. (1990), "Optimum RC member design with predetermined discrete sections", J.Struct. Eng., 116(10), 2634-2655. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:10(2634)
  15. Coello, C.A.C., Christiansen, A.D. and Hernandez, F.S. (1997), "A simple genetic algorithm for the design of reinforced concrete beams", Eng. W. Comput., 13(4), 185-196. https://doi.org/10.1007/BF01200046
  16. Deb, K. (2000), "An efficient constraint handling method for genetic algorithms", Comput. Method. Appl. M., 186(2-4), 311-338. https://doi.org/10.1016/S0045-7825(99)00389-8
  17. Eurocode-2 (2005), EN 1992-2:2005 Design of Concrete Structures. Concrete Bridges. Design and Detailing Rules, European Committee for Standardization, Brussels.
  18. Fedghouche, F. and Tiliouine, B. (2012), "Minimum cost design of reinforced concrete t-beams at ultimate loads using Eurocode2", Eng. Struct., 42, 43-50. https://doi.org/10.1016/j.engstruct.2012.04.008
  19. Ghashochi-Bargh, H. and Sadr, M.H. (2014), "A modified multi-objective elitist-Artificial Bee Colony algorithm for optimization of smart FML panels", Struct. Eng. Mech., 52(6), 1209-1224. https://doi.org/10.12989/sem.2014.52.6.1209
  20. Goldberg, D.E. (1989), Genetic Algorithms in Search, Optimization, and Machine Learning, Addison-Wesley, California, USA.
  21. Govindaraj, V. and Ramasamy, J.V. (2005), "Optimum detailed design of reinforced concrete continuous beams using genetic algorithms", Comput. Struct., 84(1), 34-48. https://doi.org/10.1016/j.compstruc.2005.09.001
  22. Govindaraj, V. and Ramasamy, J.V. (2007), "Optimum detailed design of reinforced concrete frames using genetic algorithms", Eng. Optimiz., 39(4), 471-494. https://doi.org/10.1080/03052150601180767
  23. Haug Jr, E.J. and Kirmser, P. (1967), "Minimum weight design of beams with inequality constraints on stress and deflection", J. Appl. Mech., 34(4), 999-1004. https://doi.org/10.1115/1.3607869
  24. Karaboga, D. (2005), "An idea based on honey bee swarm for numerical optimization", Technical Report-TR06 Erciyes University, Engineering Faculty, Computer Engineering Department, Kayseri.
  25. Karaboga, D. and Akay, B. (2011), "A modified artificial bee colony (abc) algorithm for constrained optimization problems", Appl. Soft Comput., 11(3), 3021-3031. https://doi.org/10.1016/j.asoc.2010.12.001
  26. Kaveh, A. and Abadi, A.S.M. (2011), "Harmony search based algorithms for the optimum cost design of reinforced concrete cantilever retaining walls", Int. J. Civil Eng., 9(1), 1-8.
  27. Kwak, H.G. and Kim, J. (2008), "Optimum design of reinforced concrete plane frames based on predetermined section database", Comput. Aided Design, 40(3), 396-408. https://doi.org/10.1016/j.cad.2007.11.009
  28. Kwak, H.G. and Kim, J. (2009), "An integrated genetic algorithm complemented with direct search for optimum design of rc frames", Comput. Aided Design, 41(7), 490-500. https://doi.org/10.1016/j.cad.2009.03.005
  29. Lee, C. and Ahn, J. (2003), "Flexural design of reinforced concrete frames by genetic algorithm", ASCE J. Struct. Eng., 129(6), 762-774. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:6(762)
  30. Lin, K.Y. and Frangopol, D.M. (1996), "Reliability-based optimum design of reinforced concrete girders", Struct. Safe., 18(2), 239-258. https://doi.org/10.1016/0167-4730(96)00013-6
  31. Marti, J.V. and Gonzalez-Vidosa, F. (2010), "Design of prestressed concrete precast pedestrian bridges by heuristic optimization", Adv. Eng. Softw., 41(7-8), 916-922. https://doi.org/10.1016/j.advengsoft.2010.05.003
  32. Ozturk, H.T. (2013), "Optimum design of reinforced concrete shallow tunnels in earthquake zones using artificial bee colony and genetic algorithms", Ph.D. Dissertation, Karadeniz Technical University, Trabzon.
  33. Ozturk, H.T. and Durmus, A. (2013) "Optimum cost design of rc columns using artificial bee colony algorithm", Struct. Eng. Mech., 45(5), 639-650.
  34. Ozturk, H.T., Durmus, A. and Durmus, A. (2012), "Optimum design of a reinforced concrete beam using artificial bee colony algorithm", Comput. Concrete, 10(3), 295-306. https://doi.org/10.12989/cac.2012.10.3.295
  35. Pei, Y. and Xia, Y. (2012) "Design of reinforced cantilever retaining walls using heuristic optimization algorithms", Procedia Earth and Planetary Science, 5, 32-36. https://doi.org/10.1016/j.proeps.2012.01.006
  36. Perea, C., Alcala, J., Yepes, V., Gonzalez-Vidosa, F. and Hospitaler, A. (2008), "Design of reinforced concrete bridge frames by heuristic optimization", Adv. Eng. Softw., 39(8), 676-688. https://doi.org/10.1016/j.advengsoft.2007.07.007
  37. Rajeev, S. and Krishnamoorthy, C. (1998), "Genetic algorithm-based methodology for design optimization of reinforced concrete frames", Comput. Aided Civil Infrastruct. Eng., 13(1), 63-74. https://doi.org/10.1111/0885-9507.00086
  38. Saribas, A. and Erbatur, F. (1996), "Optimization and sensitivity of retaining structures", J. Geotech. Eng., 122(8), 649-656. https://doi.org/10.1061/(ASCE)0733-9410(1996)122:8(649)
  39. Togan, V. and Daloglu, A.T. (2006), "Optimization of 3d trusses with adaptive approach in genetic algorithms", Eng. Struct., 28(7), 1019-1027. https://doi.org/10.1016/j.engstruct.2005.11.007
  40. TS-500, (2000), Requirements for Design and Construction of Reinforced Concrete Structures, Turkish Standard Institute, Ankara.
  41. TSHB, (1973), Technical Specifications for Highway Bridges, General Directorate of Highways, Ankara.
  42. TSC, (2007), Turkish Seismic Code, Turkish Standards Institution, Ankara.
  43. ZielinskiI, Z.A., Long, W. and Troitsky, M.S. (1995), "Designing reinforced concrete short-tied columns using the optimization technique", ACI Struct. J., 92(5), 619-626.

피인용 문헌

  1. Development of optimum design curves for reinforced concrete beams based on the INBR9 vol.18, pp.5, 2016, https://doi.org/10.12989/cac.2016.18.5.983
  2. Reliability based design optimization for a rock tunnel support system with multiple failure modes using response surface method vol.70, 2017, https://doi.org/10.1016/j.tust.2017.06.017
  3. Automated layout design of multi-span reinforced concrete beams using charged system search algorithm vol.35, pp.3, 2018, https://doi.org/10.1108/EC-05-2017-0188
  4. Fiber reinforced concrete corbels: Modeling shear strength via symbolic regression vol.20, pp.1, 2016, https://doi.org/10.12989/cac.2017.20.1.065
  5. Modeling of Co(II) adsorption by artificial bee colony and genetic algorithm vol.9, pp.5, 2016, https://doi.org/10.12989/mwt.2018.9.5.363
  6. Estimation of BOD in wastewater treatment plant by using different ANN algorithms vol.9, pp.6, 2016, https://doi.org/10.12989/mwt.2018.9.6.455