Steel and Composite Structures

  • 제20권5호
  • /
  • Pages.1043-1066
  • /
  • 2016
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Static analysis of laminated and sandwich composite doubly-curved shallow shells

  • 투고 : 2015.10.05
  • 심사 : 2016.01.04
  • 발행 : 2016.04.10
⟨ 이전 논문 다음 논문 ⟩

초록

A new analytical solution based on a third order shear deformation theory for the problem of static analysis of cross-ply doubly-curved shells is presented. The boundary-discontinuous generalized double Fourier series method is used to solve highly coupled linear partial differential equations with the mixed type simply supported boundary conditions prescribed on the edges. The complementary boundary constraints are introduced through boundary discontinuities generated by the selected boundary conditions for the derivation of the complementary solution. The numerical accuracy of the solution is compared by studying the comparisons of deflections, stresses and moments of symmetric and anti-symmetric laminated shells with finite element results using commercially available software under uniformly distributed load. Results are in good agreement with finite element counterparts. Additional results of the symmetric and anti-symmetric laminated and sandwich shells under single point load at the center and pressure load, are presented to provide data for the unsolved boundary conditions, benchmark comparisons and verifications.

키워드

참고문헌

  1. Carrera, E. (1999), "A study of transverse normal stress effect on vibration of multilayered plates and shells", J. Sound Vib., 225(5), 803-829. https://doi.org/10.1006/jsvi.1999.2271
  2. Carrera, E. (2000), "An assessment of mixed and classical theories on global and local response of multilayered orthotropic plates", Compos. Struct., 50(2), 183-198. https://doi.org/10.1016/S0263-8223(00)00099-4
  3. Carrera, E., Cinefra, M. and Nali, P. (2010), "MITC technique extended to variable kinematic multilayered plate elements", Compos. Struct., 92(8), 1888-1895. https://doi.org/10.1016/j.compstruct.2010.01.009
  4. Catapano, A., Guinta, G., Belouettar, S. and Carrera, E. (2011), "Static analysis of laminated beams via a unified formulation", Compos. Struct., 94(1), 75-83. https://doi.org/10.1016/j.compstruct.2011.07.015
  5. Chaudhuri, R.A. (2002), "On the roles of complementary and admissible boundary constraints in fourier solutions to boundary-value problems of completely coupled Rth order PDE.'s", J. Sound Vib., 251(2), 261-313. https://doi.org/10.1006/jsvi.2001.3913
  6. Chen, C.S. (2007), "The nonlinear vibration of an initially stressed laminated plate", Compos.:Part B, 38(4), 437-447. https://doi.org/10.1016/j.compositesb.2006.09.002
  7. Cho, M., Kim, K.O. and Kim, M.H. (1996), "Efficient higher order shell theory for laminated composites", Compos. Struct., 34(2), 197-212. https://doi.org/10.1016/0263-8223(95)00145-X
  8. Demasi, L. (2012), "Partially zig-zag advanced higher order shear deformation theories based on the generalized unified formulation", Compos. Struct., 94(2), 363-375. https://doi.org/10.1016/j.compstruct.2011.07.022
  9. Demasi, L. (2013), "Partially layer wise advanced zig zag and HSDT models based on the generalized unified formulation", Eng. Struct., 53, 63-91. https://doi.org/10.1016/j.engstruct.2013.01.021
  10. Ibrahim, S.M., Carrera, E., Petrolo, M. and Zappino, E. (2012), "Buckling of composite thin walled beams by refined theory", Compos. Struct., 94(2), 563-570. https://doi.org/10.1016/j.compstruct.2011.08.020
  11. Jones, R.M. (1999), Mechanics of Composite Materials, (2nd Ed.), Taylor and Francis, PA, USA.
  12. Khalili, S.M.R., Davar, A. and Fard, K.M. (2012), "Free vibration analysis of homogeneous isotropic circular cylindrical shells based on a new three-dimensional refined higher order theory", Int. J. Mech. Sci., 56(1), 1-25. https://doi.org/10.1016/j.ijmecsci.2011.11.002
  13. Loy, C.T. and Lam, K.Y. (1999), "Vibration of thick cylindrical shells on the basis of three-dimensional theory of elasticity", J. Sound Vib., 226(4), 719-737. https://doi.org/10.1006/jsvi.1999.2310
  14. Mantari, J.L., Oktem, A.S. and Soares, C.G. (2012a), "A new trigonometric shear deformation theory for isotropic, laminated composite and sandwich plates", Int. J. Solid. Struct., 49(1), 43-53. https://doi.org/10.1016/j.ijsolstr.2011.09.008
  15. Mantari, J.L., Oktem, A.S. and Soares, C.G. (2012b), "Bending and free vibration analysis of isotropic and multilayered plates and shells by using a new accurate higher-order shear deformation theory", Compos.: Part B, 43(8), 3348-3360. https://doi.org/10.1016/j.compositesb.2012.01.062
  16. Mantari, J.L., Oktem, A.S. and Soares, C.G. (2012c), "Bending response of functionally graded plates by using a new higher order shear deformation theory", Compos. Struct., 94(2), 714-723. https://doi.org/10.1016/j.compstruct.2011.09.007
  17. Mantari, J.L., Oktem, A.S. and Soares, C.G. (2012d), "A new trigonometric layerwise shear deformation theory for the finite element analysis of composite and sandwich plates", Comput. Struct., 94, 43-53.
  18. Oktem A.S., Alankaya, V. and Soares, C.G. (2013), "Boundary discontinuous fourier analysis of simply supported cross-ply plates", Appl. Math. Model., 37(3), 1378-1389. https://doi.org/10.1016/j.apm.2012.03.038
  19. Reddy, J.N. and Liu, C.F. (1985), "A higher-order shear deformation theory of laminated elastic shells", Int. J. Eng. Sci., 23(3), 319-330. https://doi.org/10.1016/0020-7225(85)90051-5
  20. Swanson, S.R. (2001), Introduction to Design and Analysis with Advanced Composite Materials, Prentice Hall Inc.
  21. Tornabene, F., Fantuzzi, N., Viola, E. and Carrera, E. (2014), "Static analysis of doubly-curved anisotropic shells and panels using CUF approach, differential geometry and differential quadrature method", Compos. Struct., 107, 675-697. https://doi.org/10.1016/j.compstruct.2013.08.038
  22. Tornabene, F., Fantuzzi, N., Bacciocchi M. and Viola, E. (2015), "A new approach for treating concentrated loads in doubly-curved composite deep shells with variable radii of curvature", Compos. Struct., 131, 433-452. https://doi.org/10.1016/j.compstruct.2015.05.049
  23. Viola, E., Tornabene, F. and Fantuzzi, N. (2013a), "Static analysis of completely doubly-curved laminated shells and panels using general higher-order shear deformation theories", Compos. Struct., 101, 59-93. https://doi.org/10.1016/j.compstruct.2013.01.002
  24. Viola, E., Tornabene, F. and Fantuzzi, N. (2013b), "General higher-order shear deformation theories for the free vibration analysis of completely doubly-curved laminated shells and panels", Compos. Struct., 95, 639-666. https://doi.org/10.1016/j.compstruct.2012.08.005
  25. Youssif, Y.G. (2009), "Non-linear design and control optimization of composite laminated doubly curved shell", Compos. Struct., 88(3), 468-480. https://doi.org/10.1016/j.compstruct.2008.05.020
  26. Zenkour, A.M. (2013), "A simple four-unknown refined theory for bending analysis of functionally graded plates", Appl. Math. Model., 37(20-21), 9041-9051. https://doi.org/10.1016/j.apm.2013.04.022

피인용 문헌

  1. Dynamic Behavior of Curved Panels of Rectangular Planar Form: An Analytical Approach 2017, https://doi.org/10.1142/S0219455418500840
  2. Three-dimensional stresses analysis in rotating thin laminated composite cylindrical shells vol.22, pp.5, 2016, https://doi.org/10.12989/scs.2016.22.5.1193
  3. Static analysis of singly and doubly curved panels on rectangular plan-form vol.24, pp.6, 2016, https://doi.org/10.12989/scs.2017.24.6.659
  4. Bending performance of laminated sandwich shells in hyperbolic paraboloidal form vol.25, pp.3, 2017, https://doi.org/10.12989/scs.2017.25.3.337
  5. Deformation and stress analysis of a sandwich cylindrical shell using HDQ Method vol.27, pp.1, 2016, https://doi.org/10.12989/scs.2018.27.1.035
  6. Geometrically nonlinear analysis of FG doubly-curved and hyperbolical shells via laminated by new element vol.28, pp.3, 2016, https://doi.org/10.12989/scs.2018.28.3.389
  7. Free Vibration of Functionally Graded Sandwich Shallow Shells on Winkler and Pasternak Foundations with General Boundary Restraints vol.2019, pp.None, 2016, https://doi.org/10.1155/2019/7527148