Steel and Composite Structures

  • 제20권5호
  • /
  • Pages.1023-1042
  • /
  • 2016
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Flexural natural vibration characteristics of composite beam considering shear deformation and interface slip

  • Zhou, Wangbao (School of Civil Engineering, Guangzhou University) ;
  • Jiang, Lizhong (School of Civil Engineering, Central South University) ;
  • Huang, Zhi (School of Civil Engineering, Central South University) ;
  • Li, Shujin (School of Civil Engineering and Architecture, Wuhan University of Technology)
  • 투고 : 2015.09.15
  • 심사 : 2016.01.02
  • 발행 : 2016.04.10
⟨ 이전 논문 다음 논문 ⟩

초록

Based on Hamilton's principle, the flexural vibration differential equations and boundary conditions of the steel-concrete composite beam (SCCB) with comprehensive consideration of the influences of the shear deformation, interface slip and longitudinal inertia of motion were derived. The analytical natural frequencies of flexural vibration were compared with available results previously observed by the experiments, the results calculated by the FE model and the other similar beam theories available in the open literatures. The comparison results showed that, the calculation results of the analytical and Timoshenko models had a good agreement with the results of the experimental test and FE model. Finally, the influences of shear deformation and interface slip on the flexural natural frequencies of the SCCB were discussed. The shear deformation effect increases with the increase of the mode orders of flexural natural vibration, and the flexural natural frequencies of the higher mode orders ignoring the influence of shear deformations effect would be overestimated. The interface slip effect decrease with the increase of the mode orders of flexural natural vibration, and the influence of the interface slip effect on flexural natural frequencies of the low mode orders is significant. The influence of the degree of shear connection on shear deformation effect is insignificant, and the low order modes of flexural natural vibration are mainly composed of the rotational displacement of cross sections.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Function of China

참고문헌

  1. Adam, C., Heuer, R. and Jeschko, A. (1997), "Flexural vibrations of elastic composite beams with interlayer slip", ACTA Mech., 125(1), 17-30. https://doi.org/10.1007/BF01177296
  2. Berczynski, S. and Wroblewski, T. (2005), "Vibration of steel-concrete composite beams using the Timoshenko beam model", J. Vib. Control., 11(6), 829-848. https://doi.org/10.1177/1077546305054678
  3. Berczynski, S. and Wroblewski, T. (2010), "Experimental verification of natural vibration models of steelconcrete composite beams", J. Vib. Control., 16(14), 2057-2081. https://doi.org/10.1177/1077546309350552
  4. Biscontin, G., Morassi, A. and Wendel, P. (2000), "Vibrations of steel-concrete composite beams", J. Vib. Control., 6(5), 691-714. https://doi.org/10.1177/107754630000600503
  5. Chakrabarti, A., Sheikh, A.H., Griffith, M. and Oehlers, D.J. (2013), "Dynamic response of composite beams with partial shear interaction using a higher-order beam theory", J. Struct. Eng., 139(1), 47-56. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000603
  6. Dilena, M. and Morassi, A. (2003), "A damage analysis of steel-concrete composite beams via dynamic methods: Part II. Analytical models and damage detection", J. Vib. Control., 9(5), 529-565. https://doi.org/10.1177/1077546303009005003
  7. Dilena, M. and Morassi, A. (2004), "Experimental modal analysis of steel concrete composite beams with partially damaged connection", J. Vib. Control., 10(6), 897-913. https://doi.org/10.1177/1077546304041370
  8. Dilena, M. and Morassi, A. (2009), "Vibrations of steel-concrete composite beams with partially degraded connection and applications to damage detection", J. Sound. Vib., 320(1), 101-124. https://doi.org/10.1016/j.jsv.2008.07.022
  9. Jimbo, S., Morassi, A., Nakamura, G. and Shirota, K. (2012), "A non-destructive method for damage detection in steel-concrete structures based on finite eigendata", Inverse Probl. Sci. Eng., 20(2), 233-270. https://doi.org/10.1080/17415977.2011.605884
  10. Lezgy-Nazargah, M. and Kafi, L. (2015), "Analysis of composite steel-concrete beams using a refined high-order beam theory", Steel Compos. Struct, Int. J., 18(6), 1353-1368. https://doi.org/10.12989/scs.2015.18.6.1353
  11. Li, J., Huo, Q., Li, X., Kong, X. and Wu, W. (2014), "Dynamic stiffness analysis of steel-concrete composite beams", Steel Compos. Struct, Int. J., 16(6), 577-593. https://doi.org/10.12989/scs.2014.16.6.577
  12. Morassi, A. and Rocchetto, L. (2003), "A damage analysis of steel-concrete composite beams via dynamic methods: Part I. Experimental results", J. Vib. Control, 9(5), 507-527. https://doi.org/10.1177/1077546303009005002
  13. Morassi, A., Nakamura, G., Shirota, K. and Sini, M. (2007), "A variational approach for an inverse dynamical problem for composite beams", Eur. J. Appl. Math., 18(1), 21-55. https://doi.org/10.1017/S0956792507006833
  14. Nguyen, Q., Hjiaj, M. and Le Grognec, P. (2012), "Analytical approach for free vibration analysis of twolayer Timoshenko beams with interlayer slip", J. Sound. Vib., 331(12), 2949-2961. https://doi.org/10.1016/j.jsv.2012.01.034
  15. Nie, J., Fan, J. and Cai, C.S. (2004), "Stiffness and deflection of steel-concrete composite beams under negative bending", J. Struct. Eng., 130(11), 1842-1851. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:11(1842)
  16. Nie, J., Cai, C.S. and Wang, T. (2005), "Stiffness and capacity of steel-concrete composite beams with profiled sheeting", Eng. Struct., 27(7), 1074-1085. https://doi.org/10.1016/j.engstruct.2005.02.016
  17. Nie, J.G., Cai, C.S., Zhou, T.R. and Li, Y. (2007), "Experimental and analytical study of prestressed steelconcrete composite beams considering slip effect", J. Struct. Eng.-ASCE, 133(4), 530-540. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:4(530)
  18. Qi, J. and Jiang, L. (2010), "Effects of interface slip and semi-rigid joint on elastic seismic response of steelconcrete composite frames", J. Central South Univ. Technol., 17(6), 1327-1335. https://doi.org/10.1007/s11771-010-0638-6
  19. Qi, J., Jiang, L., Zhang, C. and Yu, Z. (2010), "Effects of interface slip, vertical uplift and shear deformation on dynamic behavior of steel-concrete composite continuous beams", J. Central South Univ. (Sci. Technol.), 41(6), 2334-2343.
  20. Ranzi, G. and Zona, A. (2007), "A steel-concrete composite beam model with partial interaction including the shear deformability of the steel component", Eng. Struct., 29(11), 3026-3041. https://doi.org/10.1016/j.engstruct.2007.02.007
  21. Shen, Z. and Zhong, H. (2012), "Static and vibrational analysis of partially composite beams using the weak-form quadrature element method", Math. Probl. Eng., 2012, 1-23.
  22. Shen, X., Chen, W., Wu, Y. and Xu, R. (2011), "Dynamic analysis of partial-interaction composite beams", Compos. Sci. Technol., 71(10), 1286-1294. https://doi.org/10.1016/j.compscitech.2011.04.013
  23. Wang, W., Li, Q., Zhao, C. and Zhuang, W. (2013), "Dynamic properties of long-span steel-concrete composite bridges with external tendons", J. Highway Transport. Res. Develop., 7(4), 30-38. https://doi.org/10.1061/JHTRCQ.0000344
  24. Xia, Y., Hao, H. and Deeks, A.J. (2007), "Dynamic assessment of shear connectors in slab-girder bridges", Eng. Struct., 29(7), 1475-1486. https://doi.org/10.1016/j.engstruct.2006.09.014
  25. Xia, Y., Hao, H., Deeks, A.J. and Zhu, X. (2008), "Condition assessment of shear connectors in slab-girder bridges via vibration measurements", J. Bridge Eng., 13(1), 43-54. https://doi.org/10.1061/(ASCE)1084-0702(2008)13:1(43)
  26. Xu, R. and Wu, Y. (2007a), "Static, dynamic, and buckling analysis of partial interaction composite members using Timoshenko's beam theory", Int. J. Mech. Sci., 49(10), 1139-1155. https://doi.org/10.1016/j.ijmecsci.2007.02.006
  27. Xu, R. and Wu, Y. (2007b), "Two-dimensional analytical solutions of simply supported composite beams with interlayer slips", Int. J. Solid. Struct., 44(1), 165-175. https://doi.org/10.1016/j.ijsolstr.2006.04.027
  28. Yan, W. and Katafygiotis, L.S. (2015), "A two-stage fast Bayesian spectral density approach for ambient modal analysis. Part I: Posterior most probable value and uncertainty", Mech. Syst. Signal. Process., 54-55, 139-155. https://doi.org/10.1016/j.ymssp.2014.07.027
  29. Yan, W. and Ren, W. (2012), "Operational modal parameter identification from power spectrum density transmissibility", Comput-Aided Civ. Infra. Eng., 27(3), 202-217. https://doi.org/10.1111/j.1467-8667.2011.00735.x
  30. Yan, W. and Ren, W. (2015), "An Enhanced Power Spectral Density Transmissibility (EPSDT) approach for operational modal analysis: Theoretical and experimental investigation", Ent. Struct., 102, 108-119. https://doi.org/10.1016/j.engstruct.2015.08.009
  31. Yan, W., Ren, W. and Huang, T. (2012), "Statistic structural damage detection based on the closed-form of element modal strain energy sensitivity", Mech. Syst. Signal. process., 28, 183-194. https://doi.org/10.1016/j.ymssp.2011.04.011
  32. Zhou, W., Jiang, L. and Yu, Z. (2013), "Analysis of free vibration characteristic of steel-concrete composite box-girder considering shear lag and slip", J. Central South Univ., 20(9), 2570-2577. https://doi.org/10.1007/s11771-013-1770-x
  33. Zhou, W., Jiang, L., Li, S. and Kong, F. (2015a), "Elastic distortional buckling sanalysis of I-steel concrete composite beam considering shear deformation", Int. J. Struct. Stab. Dy., 1550045.
  34. Zhou, W., Li, S., Jiang, L. and Qin, S. (2015b), "Vibration analysis of steel-concrete composite box beams considering shear lag and slip", Math Probl. Eng., 2015(1), 1-8.
  35. Zhou, W., Li, S., Jiang, L. and Zhi, H. (2015c), "Distortional buckling calculation method of steel-concrete composite box beam in negative moment area", Steel Compos. Struct, Int. J., 19(5), 1203-1219. https://doi.org/10.12989/scs.2015.19.5.1203

피인용 문헌

  1. Natural vibration analysis of steel–concrete composite box beam using improved finite beam element method 2018, https://doi.org/10.1177/1369433217734638
  2. Improved Finite Beam Element Method to Analyze the Natural Vibration of Steel-Concrete Composite Truss Beam vol.2017, 2017, https://doi.org/10.1155/2017/5323246
  3. Improved finite beam element method for analyzing the flexural natural vibration of thin-walled box girders vol.9, pp.8, 2017, https://doi.org/10.1177/1687814017726292
  4. Effect of layer length on deflection in sandwich beams vol.9, pp.3, 2017, https://doi.org/10.1007/s40091-017-0159-8
  5. Dynamic characteristic study of composite box beam with corrugated webs considering interface slip and shear deformation vol.189, pp.1755-1315, 2018, https://doi.org/10.1088/1755-1315/189/2/022015
  6. Investigation on the Structural Behavior of Shear Walls with Steel Truss Coupling Beams under Seismic Loading vol.2018, pp.1687-8442, 2018, https://doi.org/10.1155/2018/5602348
  7. Free vibration of a steel-concrete composite beam with coupled longitudinal and bending motions vol.24, pp.1, 2016, https://doi.org/10.12989/scs.2017.24.1.079
  8. Analytical determination of shear correction factor for Timoshenko beam model vol.29, pp.4, 2016, https://doi.org/10.12989/scs.2018.29.4.483
  9. Improved Analytical Method to Investigate the Dynamic Characteristics of Composite Box Beam with Corrugated Webs vol.20, pp.1, 2016, https://doi.org/10.1007/s13296-019-00278-4
  10. Use of UHPC slab for continuous composite steel-concrete girders vol.34, pp.3, 2016, https://doi.org/10.12989/scs.2020.34.3.321
  11. Mapping the relationship between the structural deformation of a simply supported beam bridge and rail deformation in high-speed railways vol.234, pp.10, 2016, https://doi.org/10.1177/0954409719880668
  12. An analytical solution to the vibration characteristics for continuous girder bridge-track coupling system and its application vol.77, pp.5, 2016, https://doi.org/10.12989/sem.2021.77.5.601
  13. Post-earthquake track irregularity spectrum of high-speed railways continuous girder bridge vol.40, pp.3, 2016, https://doi.org/10.12989/scs.2021.40.3.323