Smart Structures and Systems

  • 제17권4호
  • /
  • Pages.631-646
  • /
  • 2016
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Operation of battery-less and wireless sensor using magnetic resonance based wireless power transfer through concrete

  • Kim, Ji-Min (Department of Civil Engineering, Korean Advanced Institute for Science and Technology) ;
  • Han, Minseok (Electronics Department, Osan University) ;
  • Lim, Hyung Jin (Department of Civil Engineering, Korean Advanced Institute for Science and Technology) ;
  • Yang, Suyoung (Department of Civil Engineering, Korean Advanced Institute for Science and Technology) ;
  • Sohn, Hoon (Department of Civil Engineering, Korean Advanced Institute for Science and Technology)
  • 투고 : 2015.12.22
  • 심사 : 2016.02.26
  • 발행 : 2016.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Although the deployment of wireless sensors for structural sensing and monitoring is becoming popular, supplying power to these sensors remains as a daunting task. To address this issue, there have been large volume of ongoing energy harvesting studies that aimed to find a way to scavenge energy from surrounding ambient energy sources such as vibration, light and heat. In this study, a magnetic resonance based wireless power transfer (MR-WPT) system is proposed so that sensors inside a concrete structure can be wirelessly powered by an external power source. MR-WPT system offers need-based active power transfer using an external power source, and allows wireless power transfer through 300-mm thick reinforced concrete with 21.34% and 17.29% transfer efficiency at distances of 450 mm and 500 mm, respectively. Because enough power to operate a typical wireless sensor can be instantaneously transferred using the proposed MR-WPT system, no additional energy storage devices such as rechargeable batteries or supercapacitors are required inside the wireless sensor, extending the expected life-span of the sensor.

키워드

과제정보

연구 과제 주관 기관 : Center for Integrated Smart Sensors

참고문헌

  1. Alippi, C. and Galperti, C. (2008), "An adaptive system for optimal solar energy harvesting in wireless sensor network nodes", IEEE T. Circuits-I., 55(6), 1742-1750. https://doi.org/10.1109/TCSI.2008.922023
  2. Antonini, G., Orlandi, A. and D'Elia, S. (2003), "Shielding effects of reinforced concrete structures to electromagnetic fields due to GSM and UMTS systems", IEEE T. Magn., 39(3), 1582-1585. https://doi.org/10.1109/TMAG.2003.810327
  3. Beh, T.C., Kato, M., Imura, T., Oh, S. and Hori, Y. (2013), "Automated impedance matching system for robust wireless power transfer via magnetic resonance coupling", IEEE T. Ind. Electron., 60(9), 3689-3698. https://doi.org/10.1109/TIE.2012.2206337
  4. Cho, S., Jo, H., Jang, S., Park, J., Jung, H.J., Yun C.B., Spencer, B.F. and Seo, J.W. (2010), "Structural Health Monitoring of a Cable-stayed Bridge using Wireless Smart Sensor Technology: data analysis", Smart. Struct. Syst., 6(5-6), 461-480. https://doi.org/10.12989/sss.2010.6.5_6.461
  5. Dai, J. and Ludois, D.C. (2015), "A survey of wireless power transfer and a critical comparison of inductive and capacitive coupling for small gap applications", IEEE T. Power Electr., 30(11), 6017-6029. https://doi.org/10.1109/TPEL.2015.2415253
  6. Farhey, D.N. (2005), "Bridge instrumentation and monitoring for structural diagnostics", Struct. Health. Monit., 4(4), 301-318. https://doi.org/10.1177/1475921705057966
  7. Grebennikov, A. (2004), Load Network Design Techniques for Class E RF and Microwave Amplifiers, High Frequency Electronics, July.
  8. Hao, S. (2010), "I-35W bridge collapse", J. Bridge. Eng., 15(5), 608-614. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000090
  9. Hu, X. and Wang, B. (2013), "A wireless sensor network-based structural health monitoring system for highway bridges", Comput-Aided. Civ. Inf., 28, 193-209. https://doi.org/10.1111/j.1467-8667.2012.00781.x
  10. Imura, T. and Hori, Y. (2011), "Maximizing air gap and efficiency of magnetic resonant coupling for wireless power transfer using equivalent circuit and neumann formula", IEEE T. Ind. Electron., 58(10), 4746-4752. https://doi.org/10.1109/TIE.2011.2112317
  11. Jang, S., Jo, H., Cho, S., Mechitov, K., Rice J.A., Sim S.H., Jung H.J., Yun, C.B., Spencer, B.F. and Seo, J.W. (2010), "Structural health monitoring of a cable-stayed bridge using wireless smart sensor technology: deployment and evaluation", Smart. Struct. Syst., 6(5-6), 439-459. https://doi.org/10.12989/sss.2010.6.5_6.439
  12. Jonah, O. and Georgakopoulos, S.V. (2013) "Wireless power transfer in concrete via strongly coupled magnetic resonance", IEEE T. Antenn. Propag., 61(3), 1378-1384. https://doi.org/10.1109/TAP.2012.2227924
  13. Jung, H.J., Park, J. and Kim, I.H. (2011), "An energy harvesting system using wind-induced vibration of a stay cable for powering a wireless sensor node", Smart Mater. Struct., 20(7), 1-9.
  14. Kurs, A., Karalis, A., Moffatt, R., Joannopoulos, J.D., Fisher, P. and Soljacic, M. (2007), "Wireless power transfer via strongly coupled magnetic resonances", Science, 317(5834), 83-86. https://doi.org/10.1126/science.1143254
  15. Li, J., Hao, H., Fan, K. and Brownjohn, J. (2015), "Development and application of a relative displacement sensor for structural health monitoring of composite bridges", Struct. Control Health Monit., 22, 726-742. https://doi.org/10.1002/stc.1714
  16. Lim, H.J., Sohn, H., DeSimio, M.P. and Brown, K. (2014), "Reference-free fatigue crack detection using nonlinear ultrasonic modulation under changing temperature and loading conditions", Mech. Syst. Signal Pr., 45(2), 468-478. https://doi.org/10.1016/j.ymssp.2013.12.001
  17. Liu, P., Yang, S.Y., Lim, H.J., Park, H.C., Ko, I.C. and Sohn, H. (2014), "Development of a wireless nonlinear wave modulation spectroscopy (NWMS) sensor node for fatigue crack detection", Proceedings of SPIE International Symposia, Smart Structures & Materials and Nondestructive Evaluation for Health Monitoring and Diagnostics, San Diego, CA, March.
  18. Lopez-Higuera, J.M., Cobo, L.R., Incera, A.Q. and Cobo, A. (2011), "Fiber optic sensors in structural health monitoring", J. Lightwave Technol., 29(4), 587-608. https://doi.org/10.1109/JLT.2011.2106479
  19. Lynch, J.P. and Loh, K.J. (2006), "A Summary Review of Wireless Sensors and Sensor Networks for Structural Health Monitoring", Shock Vib. Digest, 38(2), 91-128. https://doi.org/10.1177/0583102406061499
  20. Lynch, J.P., Wang, Y., Loh, K.J., Yi, J.H. and Yun, C.B. (2006), "Performance monitoring of the geumdang bridge using a dense network of high-resolution wireless sensors", Smart Mater. Struct., 15, 1561-1575. https://doi.org/10.1088/0964-1726/15/6/008
  21. Moon, S.C., Kim, B.C., Cho, S.Y., Ahn, C.H. and Moon, G.W. (2014), "Analysis and design of a wireless power transfer system with an intermediate coil for high efficiency", IEEE T. Ind. Electron., 61(11), 5861-5870. https://doi.org/10.1109/TIE.2014.2301762
  22. Nguyen, T., Chan, T.H.T., Thambiratnam, D.P. and King, L. (2015), "Development of a cost-effective and flexible vibration DAQ system for long-term continuous structural health monitoring", Mech. Syst. Signal Pr., 64-65, 313-324.. https://doi.org/10.1016/j.ymssp.2015.04.003
  23. Ogunsola, A., Reggiani, U. and Sandrolini, L. (2006), "Modelling shielding properties of concrete", Proceedings of the 17th International Zurich Symposium on Electromagnetic Compatibility, Singapore, February.
  24. Park, H.J., Sohn, H., Yun, C.B., Chung, J. and Kwon, I.B. (2010), "A wireless guided wave excitation technique based on laser and optoelectronics", Smart. Struct. Syst., 6(5), 749-765. https://doi.org/10.12989/sss.2010.6.5_6.749
  25. Raghavan A. and Cesnik, C.E.S. (2007), "Review of guided-wave structural health monitoring", Shock Vib. Digest, 39(2), 91-114. https://doi.org/10.1177/0583102406075428
  26. Richalot, E., Bonilla, M., Wong, M.F., Fouad-Hanna, V., Baudrand, H. and Wiart, J. (2003), "Electromagnetic propagation into reinforced concrete walls", IEEE T. Microw Theory, 48(3), 357-366.
  27. Roh, J.S., Chi, Y.S. and Kang, T.J. (2008), "Electromagnetic shielding effectiveness of multifunctional metal composite fabrics", Text. Res. J., 78(9), 825-835. https://doi.org/10.1177/0040517507089748
  28. Sample, A.P., Meyer, D.A. and Smit. J.R. (2011) "Analysis, experimental results, and range adaptation of magnetically coupled resonators for wireless power transfer", IEEE T. Ind. Electron., 58(2), 544-554. https://doi.org/10.1109/TIE.2010.2046002
  29. Schallhorn, C. and Rahmatalla, S. (2015), "Crack detection and health monitoring of highway steel-girder bridges", Struct. Health Monit., 14(3), 281-299. https://doi.org/10.1177/1475921714568404
  30. Sohn, H., Farrar C.R., Hemez, F.M., Shunk, D.D., Stinemates D.W., Nadler, B.R. and Czarnecki, J.J. (2004), A Review of Structural Health Monitoring Literature: 1996-2001, Los Alamos National Laboratory Report, February.
  31. Sohn, H., Lim, H.J., Desimio, M.P., Brown, K. and Derriso, M. (2014), "Nonlinear ultrasonic wave modulation for online fatigue crack detection", J. Sound. Vib., 333(5), 1473-1484. https://doi.org/10.1016/j.jsv.2013.10.032
  32. Sokal, N.O. and Sokal, A.D. (1975), "Class E-a new class of high-efficiency tuned single-ended switching power amplifiers", IEEE J. Solid-St. Circ., 10(3), 168-176. https://doi.org/10.1109/JSSC.1975.1050582
  33. Tan, Y.K. and Panda, S.K. (2011), "Energy harvesting from hybrid indoor ambient light and thermal energy sources for enhanced performance of wireless sensor nodes", IEEE T. Ind. Electron., 58(9), 4424-4435. https://doi.org/10.1109/TIE.2010.2102321
  34. Visser, H.J and Vullers R.J.M. (2013), "RF energy harvesting and transport for wireless sensor network applications: Principles and requirements", P. IEEE, 101(6), 1410-1423. https://doi.org/10.1109/JPROC.2013.2250891
  35. Wei, X., Wang, Z. and Dai, H. (2014), "A critical review of wireless power transfer via strongly coupled magnetic resonances", Energies, 7, 4316-4341. https://doi.org/10.3390/en7074316
  36. Yang, J.R., Kim, J. and Park, Y.J. (2014), "Class E power amplifiers using high-Q inductors for loosely coupled wireless power transfer system", J. Electr. Eng. Technol., 9(2), 569-575. https://doi.org/10.5370/JEET.2014.9.2.569

피인용 문헌

  1. Wireless acceleration sensor of moving elements for condition monitoring of mechanisms vol.28, pp.9, 2017, https://doi.org/10.1088/1361-6501/aa7ab6
  2. Probabilistic Assessment of High-Throughput Wireless Sensor Networks vol.16, pp.12, 2016, https://doi.org/10.3390/s16060792
  3. Reliability improvement of nonlinear ultrasonic modulation based fatigue crack detection using feature-level data fusion vol.20, pp.6, 2017, https://doi.org/10.12989/sss.2017.20.6.683
  4. Analysis and Optimization of Asymmetric Wireless Power Transfer in Concrete vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/8841210
  5. Design method for the 2DOF electromagnetic vibrational energy harvester vol.25, pp.4, 2016, https://doi.org/10.12989/sss.2020.25.4.393