References
- Y. S. Jeon and J. W. Rhim, "Composite membrane preparation for low pressure using salting-out method and its", Membr. J., 25, 440 (2015). https://doi.org/10.14579/MEMBRANE_JOURNAL.2015.25.5.440
- S. Kwon and Y. T. Lee, "Improvement of fouling resistance with reverse osmosis membrane using multi-layer silane-epoxy surface modification", Membr. J., 25, 332 (2015). https://doi.org/10.14579/MEMBRANE_JOURNAL.2015.25.4.332
- K. M. Kyung and J. Y. Park, "Effect of pH in hybrid water treatment process of PVdF nanofibers spiral wound microfiltration and granular activated carbon", Membr. J., 25, 358 (2015). https://doi.org/10.14579/MEMBRANE_JOURNAL.2015.25.4.358
- P. K. Tewari, "Nanocomposite membrane technology: Fundamentals and applications", pp. 49, CRC Press, Boca Raton, FL (2015).
- T. Varzakas and C. Tzia, "Food engineering handbook: Food engineering fundamentals", CRC Press, Boca Raton, FL (2014).
- A. Basile, A. Cassano, and N. K. Rastogi, "Advances in membrane technologies for water treatment: Materials, processes and applications", pp. 61, Woodhead Publishing (Elsevier), Amsterdam, Netherlands (2015).
- L. W. McKeen, "Permeability properties of plastics and elastomers, third edition (Plastics Design Library) 3rd edition", Elsevier, Amsterdam, Netherlands (2011).
- A. F. Ismail and S. N. Kumari, "Potential effect of potting resin on the performance of hollow fibre membrane modules in a CO2/CH4 gas separation system", J. Membr. Sci., 236, 183 (2004). https://doi.org/10.1016/j.memsci.2004.02.023
- H. Guan, F. Yang, and Q. Wang, "Study on evaluation index system of rubber materials for sealing", Mater. Design, 32, 2404 (2011). https://doi.org/10.1016/j.matdes.2010.12.030
- http://www.toraywater.com/products/parts/o_ring/index. html Feburary 10 (2015).
- J. Holbery and D. Houston, "Natural-fiber-reinforced polymer composites in automotive applications", Jom, 58, 80 (2006).
- H. El Kadi, "Modeling the mechanical behavior of fiber-reinforced polymeric composite materials using artificial neural networks-review", Compos. Struct., 73, 1 (2006). https://doi.org/10.1016/j.compstruct.2005.01.020
- E. Barjasteh, E. J. Bosze, Y. I. Tsai, and S. R. Nutt, "Thermal aging of fiberglass/carbon-fiber hybrid composites", Compos. Pt. A-Appl. Sci. Manuf., 40, 2038 (2009). https://doi.org/10.1016/j.compositesa.2009.09.015
- E. C. Botelho, R. A. Silva, L. C. Pardini, and M. C. Rezende, "A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures", Materials Research, 9, 247 (2006). https://doi.org/10.1590/S1516-14392006000300002
- J. Zhu, A. Imam, R. Crane, K. Lozano, V. N. Khabashesku, and E. V. Barrera, "Processing a glass fiber reinforced vinyl ester composite with nanotube enhancement of interlaminar shear strength", Compos. Sci. and Technol., 67, 1509 (2007). https://doi.org/10.1016/j.compscitech.2006.07.018
- K. Palanikumar, L. Karunamoorthy, and R. Karthikeyan, "Assessment of factors influencing surface roughness on the machining of glass fiber-reinforced polymer composites", Mater. Design, 27, 862 (2006). https://doi.org/10.1016/j.matdes.2005.03.011
- A. Salehi-Khojin, R. Bashirzadeh, M. Mahinfalah, and R. Nakhaei-Jazar, "The role of temperature on impact properties of Kevlar/fiberglass composite laminates", Compos. Pt. B-Eng., 37, 593 (2006). https://doi.org/10.1016/j.compositesb.2006.03.009
- P. K. Mallick, "Fiber-reinforced composites: Materials, manufacturing, and design, third edition (Mechanical Engineering)" pp. 32, CRC Press, Boca Raton, FL (2007).
- P. K. Mallick, "Fiber-reinforced composites: materials, manufacturing, and design", pp. 34, CRC press, CRC Press, Boca Raton, FL (2007).
- http://www.massey.ac.nz/-ychisti/MHandbook.pdf.
- A. Cavdar, "A study on the effects of high temperature on mechanical properties of fiber reinforced cementitious composites", Compos. Pt. B-Eng., 43, 2452 (2012). https://doi.org/10.1016/j.compositesb.2011.10.005
- M. J. Jweeg, A. P. D. A. S. Hammood, and M. Al-Waily, "Experimental and theoretical studies of mechanical properties for reinforcement fiber types of composite materials", International Journal of Mechanical & Mechatronics Engineering IJMMEIJENS, 12, 62 (2012).
- D. Gay, "Composite materials: design and applications", CRC Press, Boca Raton, FL (2014).
- A. Shakeri and M. Raghimi, "Studies on mechanical performance and water absorption of recycled newspaper/glass fiber reinforced polypropylene hybrid composites", J. Reinf. Plast. Comp., 00, 1 (2009).
- A. Pusz, M. Szymiczek, and K. Michalik, "Ageing process influence on mechanical properties of polyamide-glass composites applied in dentistry", Journal of Achievements in materials and manufacturing engineering, 38, 49 (2009).
- T. P. Sathishkumar, J. Naveen, and S. Satheeshkumar, "Characterization of natural fiber and composites - a review", J. Reinf. Plast. Comp., 32, 1446 (2013).
- S. Mishra, A. K. Mohanty, L. T. Drzal, M. Misra, S. Parija, S. K. Nayak, and S. S. Tripathy, "Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites", Compos. Sci. Technol., 63, 1377 (2003). https://doi.org/10.1016/S0266-3538(03)00084-8
- P. N. Khanam, M. M. Reddy, K. Raghu, K. John, and S. V. Naidu, "Tensile, flexural and compressive properties of sisal/silk hybrid composites", J. Reinf. Plast. Comp., 26, 1065 (2007). https://doi.org/10.1177/0731684407079347
- M. A. A. Ghani, Z. Salleh, K. M. Hyie, M. N. Berhan, Y. M. D. Taib, and M. A. I. Bakri, "Mechanical properties of kenaf/fiberglass polyester hybrid composite", Procedia Engineering, 41, 1654 (2012). https://doi.org/10.1016/j.proeng.2012.07.364
- K. S. Ahmed, S. Vijayarangan, and A. Kumar, "Low Velocity Impact Damage Characterization of Woven Jute-glass Fabric Reinforced Isothalic Polyester Hybrid Composites", J. Reinf. Plast. Comp., 26, 959 (2007). https://doi.org/10.1177/0731684407079414
- M. Thiruchitrambalam, A. Alavudeen, A. Athijayamani, N. Venkateshwaran, and A. E. Perumal, "Improving mechanical properties of banana/kenaf polyester hybrid composites using sodium laulryl sulfate treatment", Mater. Phys. Mech., 8, 165 (2009).
- M. Idicula, S. K. Malhotra, K. Joseph, and S. Thomas, "Dynamic mechanical analysis of randomly oriented intimately mixed short banana/sisal hybrid fibre reinforced polyester composites", Compos. Sci. Technol., 65, 1077 (2005). https://doi.org/10.1016/j.compscitech.2004.10.023
- R. Velmurugan and V. Manikandan, "Mechanical properties of glass/palmyra fiber waste sandwich composites" Indian. J. Eng. Mater. S., 12, 563 (2005).
- K. S. Ahmed and S. Vijayaragan, "Elastic property evaluation of jute-glass fibre hybrid composite using experimental and CLT approach", Indian. J.Eng. Mater. S., 13, 435 (2006).
- A. Athijayamani, M. Thiruchitrambalam, U. Natarajan, and B. Pazhanivel, "Effect of moisture absorption on the mechanical properties of randomly oriented natural fibers/polyester hybrid composite", Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 517, 344 (2009). https://doi.org/10.1016/j.msea.2009.04.027
- K. Raghu, P. N. Khanam, and S. V. Naidu,"Chemical resistance studies of silk/sisal fiber-reinforced unsaturated polyester-based hybrid composites", J. Reinf. Plast. Comp., 0, 1 (2008).
- N. Venkateshwaran, A. ElayaPerumal, A. Alavudeen, and M. Thiruchitrambalam, "Mechanical and water absorption behaviour of banana/sisal reinforced hybrid composites", Mater. Design, 32, 4017 (2011). https://doi.org/10.1016/j.matdes.2011.03.002
- A. I. Selmy, A. R. Elsesi, N. A. Azab, and M. A. A. El-baky, "Monotonic properties of unidirectional glass fiber (U)/random glass fiber (R)/epoxy hybrid composites", Mater. Design, 32, 743 (2011). https://doi.org/10.1016/j.matdes.2010.07.031
- M. Sayer, N. B. Bektas, E. Demir, and H. Callioglu, "The effect of temperatures on hybrid composite laminates under impact loading", Compos. Pt. B-Eng., 43, 2152 (2012). https://doi.org/10.1016/j.compositesb.2012.02.037
- M. Jawaid, H. P. S. A. Khalil, A. A. Bakar, and P. N. Khanam, "Chemical resistance, void content and tensile properties of oil palm/jute fibre reinforced polymer hybrid composites", Mater. Design, 32, 1014 (2011). https://doi.org/10.1016/j.matdes.2010.07.033
- M. Zhan, R. P. Wool, and J. Q. Xiao, "Electrical properties of chicken feather fiber reinforced epoxy composites", Compos. Pt. A-Appl. Sci. Manuf., 42, 229 (2011). https://doi.org/10.1016/j.compositesa.2010.11.007
- T. Czigany, "Special manufacturing and characteristics of basalt fiber reinforced hybrid polypropylene composites: mechanical properties and acoustic emission study", Compos. Sci. Technol., 66, 3210 (2006). https://doi.org/10.1016/j.compscitech.2005.07.007
- P. Wambua, B. Vangrimde, S. Lomov, and I. Verpoest, "The response of natural fibre composites to ballistic impact by fragment simulating projectiles", Compos. Struct., 77, 232 (2007). https://doi.org/10.1016/j.compstruct.2005.07.006
- M. M. Thwe and K. Liao, "Durability of bamboo-glass fiber reinforced polymer matrix hybrid composites", Compos. Sci. Technol., 63, 375 (2003). https://doi.org/10.1016/S0266-3538(02)00225-7
- M. A. Khan, J. Ganster, and H.-P. Fink, "Hybrid composites of jute and man-made cellulose fibers with polypropylene by injection moulding", Compos. Pt. A-Appl. Sci. Manuf., 40, 846 (2009). https://doi.org/10.1016/j.compositesa.2009.04.015
- S. K. Nayak, "Degradation and flammability behavior of PP/banana and glass fiber-based hybrid composites", International Journal of Plastics Technology, 13, 47 (2009). https://doi.org/10.1007/s12588-009-0006-2
- E. M. Fernandes, V. M. Correlo, J. F. Mano, and R. L. Reis, "Novel cork-polymer composites reinforced with short natural coconut fibres: effect of fibre loading and coupling agent addition", Compos. Sci. Technol., 78, 56 (2013). https://doi.org/10.1016/j.compscitech.2013.01.021
- I. S. Aji, E. S. Zainudin, A. Khalina, S. M. Sapuan, and M. D. Khairul, "Studying the effect of fiber size and fiber loading on the mechanical properties of hybridized kenaf/PALF-reinforced HDPE composite", J. Reinf. Plast. Comp., 30, 546 (2011). https://doi.org/10.1177/0731684411399141
- K. Okubo, T. Fujii, and E. T. Thostenson, "Multi-scale hybrid biocomposite: processing and mechanical characterization of bamboo fiber reinforced PLA with microfibrillated cellulose", Compos. Pt. A-Appl. Sci. Manuf., 40, 469 (2009). https://doi.org/10.1016/j.compositesa.2009.01.012
- H. P. S. A. Khalil, C. W. Kang, and T. O. Adawi, "The effect of different laminations on mechanical and physical properties of hybrid composites", J. Reinf. Plast. Comp., 0, 1 (2008).
- L. X. Zhong, S. Y. Fu, X. S. Zhou, and H. Y. Zhan, "Effect of surface microfibrillation of sisal fibre on the mechanical properties of sisal/aramid fibre hybrid composites", Compos. Pt. A-Appl. Sci. Manuf., 2, 244 (2011).
- F. P. Gerstle, "Composites," Encyclopedia of Polymer Science and Engineering, Wiley, New York (1991).