Journal of Electrical Engineering and Technology

  • 제11권1호
  • /
  • Pages.109-116
  • /
  • 2016
  • /
  • 1975-0102(pISSN)
  • /
  • 2093-7423(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

Analytic Model of Four-switch Inverter-fed Driving System for Wye or Delta-connected Motor with Current Ripple Reduction Scheme

  • Lee, Dong-Myung (School of Electronic and Electrical Engineering, Hongik University) ;
  • Jung, Jin-Woo (Division of Electronics and Electrical Engineering, Dongguk University) ;
  • Heo, Seo Weon (School of Electronic and Electrical Engineering, Hongik University) ;
  • Kim, Tae Heoung (Dept. of Electrical Engineering, ERI, Gyeongsang National University)
  • 투고 : 2015.05.06
  • 심사 : 2015.07.26
  • 발행 : 2016.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper proposes an analytic model for four-switch inverter (FSI)-driven wye (Y) or delta (Δ)-connected motors with a current ripple reduction algorithm. FSIs employ four switches in controlling three-phase load instead of using six switches. They have split dc-link stage, and due to this inherent structure there exists the voltage difference between upper and lower capacitors, which results in distortion of the inverter output voltage. To study characteristics of FSIs, this paper presents an advanced simulation models of FSI-driven control system for 3-phase motor that can has a wire connection either Y or Δ. In addition, this paper introduces a current ripple reduction scheme that mitigates degradation of control performance due to the voltage difference between the dc-link capacitors. The validity of the proposed method and the analytic model is verified by simulations and experiments carried out with 1-HP induction machine with Y or Δ-connection

키워드

과제정보

연구 과제번호 : DFIG 풍력발전시스템의 계통 이상 회피 및 계통 전압 안정화 알고리즘 개발

연구 과제 주관 기관 : 홍익대학교

참고문헌

  1. M.H. Soreshjani, R. Heidari, and A. Ghafari, “The application of classical Direct Torque and Flux Control (DTFC) for line-start permanent magnet synchronous and its comparison with permanent magnet synchronous motor,” Journal of Electrical Eng. and Tech., Vol. 9, No. 6, pp. 1954-1959, 2014. https://doi.org/10.5370/JEET.2014.9.6.1954
  2. T.H. Kim and J. Lee, “Influence on brushless DC motor performance due to signal distortion of the position sensor and DC link voltage ripple,” Inter. Journal of Applied Electro. and Mech., Vol. 19, pp. 287-291, 2004.
  3. D.M. Lee and W.C. Lee, “Analysis of relationship between abnormal current and position detection error in sensorless controller for interior permanent magnet BLDC motors,” IEEE Trans. Magnetics, Vol. 44, No. 8, pp. 2074-2081, Aug. 2008. https://doi.org/10.1109/TMAG.2008.923203
  4. H. Broeck, and J. Wyk, “A comparative investigation of a three-phase induction machine with a component minimized voltage-fed inverter under different control options,” IEEE Trans. Industry Appli., Vol. 20, No. 2, pp. 309-320, Mar./Apr. 1984.
  5. F. Blassbjerg, H. Kragh, D.O. Neacsu, and J.K. Pedersen, “Comparison of modulation strategies for B4-inverters,” Euro. Power Electr. and Drives Assoc., Vol. 2, pp. 378-385, 1997.
  6. C.B. Jacobina, and B.R. Correa, “Induction motor drive system for low-power applications,” IEEE Trans. Industry Appli., Vol. 35, No. 1, pp. 52-61, Jan./Feb. 1999. https://doi.org/10.1109/28.740845
  7. F. Blaabjerg, D. O. Neacsu, and J. K. Pederson, “Adaptive SVM to compensate dc-link voltage ripple for four-switch three-phase voltage-source inverter,” IEEE Trans. Power Elect., Vol. 14, No. 4, pp. 743-752, July 1999.
  8. D.M. Lee, J.B. Park, and H.A. Toliyat, “A simple current ripple reduction method for B4 inverters,” Journal of Electrical Eng. and Tech., Vol. 8, No. 5, pp. 1062-1069, 2013. https://doi.org/10.5370/JEET.2013.8.5.1062
  9. J. H. Kim, J. S. Hong, and K. H. Nam, “A current distortion compensation scheme for four-switch inverters,” IEEE Trans. Power Elect., Vol. 24, No. 4, pp. 1032-1040, April 2009. https://doi.org/10.1109/TPEL.2008.2011552
  10. D.M. Lee, “Motor control method for four-switch inverters with dc-link voltage ripple compensation algorithm,” Journal of Korean Institute of Illum. and Elect. Instal. Engineers, Vol. 27, No. 7, pp. 59-66, 2013. https://doi.org/10.5207/JIEIE.2013.27.7.059
  11. B.A. Welchko, T.A. Lipo, T.M. Jahns, and S.E. Schulz, “Fault tolerant three-phase AC motor drive topologies: a comparison of features, cost, and limitations,” IEEE Trans. Power Elect., Vol. 19, No. 4, pp. 1108-1116, July 2004. https://doi.org/10.1109/TPEL.2004.830074
  12. Y. Hu, L. Zhang, W. Huang, and F. Bu, "A fault-tolerant induction generator system based on instantaneous torque control," IEEE Trans. Energy Conv., Vol. 25, No. 2, pp. 412-421, June 2010. https://doi.org/10.1109/TEC.2009.2038898
  13. K.D. Hoang, Z.Q. Zhu, and M.P. Foster, “Influence and compensation of inverter voltage drop in direct torque-controlled four-switch three-phase PM brushless AC drives,” IEEE Trans. Power Elect., Vol. 26, No. 8, pp. 2343-2357, Aug. 2011. https://doi.org/10.1109/TPEL.2010.2096561
  14. S. Dasgupta, S.N. Mohan, S.K. Sahoo, and S.K. Panda, “Application of four-switch-based three-phase grid- connected inverter to connect renewable energy source to a generalized unbalanced microgrid system,” IEEE Trans. Industrial Elect., Vol. 60, No. 3, pp. 1204-1215, March 2013. https://doi.org/10.1109/TIE.2012.2202350
  15. C.H. Ong, “Dynamic simulation of electric machinery,” Prentice Hall, New Jersey, 1998, pp. 224-229.