DOI QR코드

DOI QR Code

암반의 파괴기준에 따른 제주도 현무암의 강도정수

Strength Parameters of Basalts in Jeju Island according to Rock Failure Criterions

  • 양순보 (일본 국립연구개발법인 항만공항기술연구소)
  • Yang, Soon-Bo (Port and Airport Research Institute, National Research and Development Agency)
  • 투고 : 2015.12.19
  • 심사 : 2016.02.01
  • 발행 : 2016.03.31

초록

본 연구에서는 제주도 북동부 육해상, 남동부 해상 및 북서부 해상에서 채취한 현무암 암석에 대하여 삼축압축시험을 수행하였으며, 그 결과로부터 산정된 Hoek-Brown 파괴기준의 파라미터인 암석 계수 $m_i$의 특성을 살펴보았다. 그리고 Hoek-Brown 파괴기준으로부터 추정된 점착력 및 내부 마찰각과 Mohr-Coulomb 파괴기준으로부터 산정된 점착 력 및 내부 마찰각을 각각 비교 분석하였다. 그 결과 제주도 현무암 암석에 대한 Hoek-Brown 파괴기준의 암석 계수 $m_i$는 암석의 내부 마찰각과 밀접하게 연관되어 있었으며, 내부 마찰각이 증가함에 따라 급격하게 증가하였다. Hoek-Brown 파괴기준으로부터 추정된 점착력은 Mohr-Coulomb 파괴기준으로부터 산정된 점착력보다 평균적으로 약 24% 정도 과대하게 추정되고 있으며, Hoek-Brown 파괴기준으로부터 추정된 내부 마찰각은 Mohr-Coulomb 파괴기준의 내부 마찰각과 비슷한 값을 나타내고 있음을 알 수 있었다.

In this study, a series of triaxial compressive strength tests were conducted for basaltic intact rocks sampled in the northeastern onshore and offshore, southeastern offshore and northwestern offshore of Jeju Island. Hoek-Brown constants $m_i$ were estimated from the results of the triaxial compression tests, and the properties of the Hoek-Brown constants $m_i$ were investigated. In addition, the cohesion and internal friction angle, strength parameters of Mohr-Coulomb failure criterion, obtained from the results of the triaxial compression tests were compared and analyzed with those estimated from Hoek-Brown failure criterion, respectively. As results, it was found that the Hoek-Brown constant $m_i$ is deeply related to the internal friction angle. As the internal friction grows, the Hoek-Brown constant $m_i$ increases exponentially. The cohesions estimated from the Hoek-Brown failure criterion, on average, are approximately 24% higher than those obtained from the Mohr-Coulomb failure criterion. The internal friction angles estimated from the Hoek-Brown failure criterion are similar to those obtained from the Mohr-Coulomb failure criterion.

키워드

참고문헌

  1. ASTM D 7012-13, Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures, ASTM International.
  2. Brown, E.T. (Ed). (1981), Rock Characterization, Testing and Monitoring - ISRM Suggested Methods, Pergamon, pp.171-183.
  3. Cho, T.C., Lee, S.B., Hwang, T.J., and Won, K.S. (2009), "Variations of Mechanical Properties of Hallasan Trachyte with Respect to the Degree of Weathering", Tunnel and Underground Space, Vol.19, No.4, pp.287-303.
  4. Eum, K.Y. (2002), Study on the Mechanical Properties of Volcanic Rocks in Chejudo, Master thesis, Yonsei University, p.63.
  5. Hoek, E. and Brown, E.T. (1980), "Empirical Strength Criterion for Rock Masses", Journal of the Geotechnical Engineering Division, ASCE, Vol.106, No.GT9, pp.1013-1035.
  6. Hoek, E., Kaiser, P.K., and Bawden, W.F. (1995), Support of Underground Excavations in Hard Rock, Balkema, pp.91-106.
  7. Hoek, E. and Brown, E.T. (1997), "Practical Estimates of Rock Mass Strength", International Journal of Rock Mechanics and Mining Sciences, Vol.34, No.8, pp.1165-1186. https://doi.org/10.1016/S1365-1609(97)80069-X
  8. Hoek, E., Carranza-Torres, C., and Corkum, B. (2002), "Hoek-Brown Failure Criterion - 2002 Edition", NARMS-TAC 2002: Mining and Tunneling Innovation and Opportunity, Vol.1, pp.267-273.
  9. International Society for Rock Mechanics (1981), Suggested Methods for Rock Characterization, Testing and Monitoring, Pergamon Press.
  10. Kim, J.H. (2006), A Study on the Mechanical Characteristics and the Strength in Pyoseonri Basalt, Master thesis, Cheju National University, p.93.
  11. Kim, Y.K. and Choi, O.G. (1991), "Engineering Geological Characteristics of Volcanic Rocks of the Northwestern Cheju Island, Korea", The Journal of Engineering Geology, Vol.1, No.1, pp.19-37.
  12. Korean Geotechnical Society (2012), Geology and Rock Mechanics for Geotechnical Engineer II, CIR Publishing Company, pp.105-110.
  13. Korean Society for Rock Mechanics (2005), Standard method for sampling and preparation of rock specimen, pp.81-84.
  14. Marinos, P. and Hoek, E. (2000), "GSI: A Geologically Friendly Tool for Rock Mass Strength Estimation", Proceedings of the International Conference on Geotechnical and Geological Engineering, pp.1422-1440.
  15. Marinos, P. and Hoek, E. (2001), "Estimating the Geotechnical Properties of Heterogeneous Rock Masses such as Flysch", Bulletin of Engineering Geology and the Environment, Vol.60, No.2, pp. 85-92. https://doi.org/10.1007/s100640000090
  16. Moon, K., Park, S., Kim, Y., and Yang, S. (2014), "Mechanical Properties of Basalt in Jeju Island with Respect to Porosity", Journal of the Korean Society of Civil Engineering, Vol.34, No.4, pp.1215-1225. https://doi.org/10.12652/Ksce.2014.34.4.1215
  17. Nam, J.M., Yun, J.M., Song, Y.S., and Kim, J.H. (2008a), "Analysis of Engineering Properties to Basalt in Cheju Island", Journal of Korean Geosynthetics Society, Vol.7, No.1, pp.12-21.
  18. Nam, J.M., Yun, J.M., Song, Y.S., and Kim, J.H. (2008b), "Analysis of Influence Factors to Compressive and Tensile Strength of Basalt in Cheju Island", The Journal of Engineering Geology, Vol.18, No.2, pp.215-225.
  19. Nam, J.M., Yun, J.M., and Song, Y.S. (2009), "Estimation to the Strength of Basalt in Jeju Island according to Rock Failure Criterions", The Journal of Engineering Geology, Vol.19, No.2, pp.153-163.
  20. Yang, S.B. (2014), "Comparative Study on Physical and Mechanical Characteristics of Volcanic Rocks in Jeju Island", Journal of the Korean Geotechnical Society, Vol.30, No.11, pp.39-49. https://doi.org/10.7843/kgs.2014.30.11.39
  21. Yang, S.B. (2015a), "Physical and Mechanical Characteristics of Basalts in Northwestern and Southeastern Jeju Island", Journal of the Korean Geotechnical Society, Vol.31, No.7, pp.41-52. https://doi.org/10.7843/kgs.2015.31.7.41
  22. Yang, S.B. (2015b), "Cohesion and Internal Friction Angle of Basalts in Jeju Island", Journal of the Korean Geotechnical Society, Vol.31, No.11, pp.33-40. https://doi.org/10.7843/kgs.2015.31.11.33
  23. Yoon, S.H. and Ko, K.W. (2011), Topography, Geology and Underground Water in Jeju Island, Nae Ha Publishing Company, pp.5-57.

피인용 문헌

  1. 제주도 화산암의 압열인장강도와 일축압축강도로부터 추정된 점착력과 내부마찰각 vol.36, pp.2, 2016, https://doi.org/10.7843/kgs.2020.36.2.17