설비공학논문집 (Korean Journal of Air-Conditioning and Refrigeration Engineering)

  • 제28권3호
  • /
  • Pages.95-102
  • /
  • 2016
  • /
  • 1229-6422(pISSN)
  • /
  • 2465-7611(eISSN)
대한설비공학회 (The Society of Air-Conditioning and Refrigerating Engineers of Korea)
권호 표지
DOI QR코드

DOI QR Code

나노유체에서 파울링 현상이 유동 비등 열전달에 미치는 영향에 대한 연구

A Study on Influence of Flow Boiling Heat Transfer on Fouling Phenomenon in Nanofluids

  • 김우중 (제주대학교 에너지공학과) ;
  • 양용우 (제주대학교 에너지공학과) ;
  • 김영훈 (제주대학교 에너지공학과) ;
  • 박성식 (한국품질재단 제주품질연구원) ;
  • 김남진 (제주대학교 에너지공학과)
  • Kim, Woojoong (Department of Nuclear and Energy Engineering, Jeju National University) ;
  • Yang, Yongwoo (Department of Nuclear and Energy Engineering, Jeju National University) ;
  • Kim, Younghun (Department of Nuclear and Energy Engineering, Jeju National University) ;
  • Park, Sungseek (Jeju Institute of Quality, Korean Foundation for Quality) ;
  • Kim, Namjin (Department of Nuclear and Energy Engineering, Jeju National University)
  • 투고 : 2015.11.02
  • 심사 : 2016.02.02
  • 발행 : 2016.03.10
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A boiling heat transfer is used in various industry such as power generation systems, heat exchangers, air-conditioning and refrigerations. In the boiling heat transfer system, the critical heat flux (CHF) is the important factor, and it indicated safety of the system. It has kept up studies on the CHF enhancement. Recently, it is reported the CHF enhancement, when working fluid used the nanofluid with high thermal properties. But it could be occurred nanoflouling phenomenon from nanoparticle deposition, when nanofluid applied the heat transfer system. And, it is reported that the safety and thermal efficiency of heat transfer system could decrease. Therefore, it is compared and analyzed to the CHF and the boiling heat transfer coefficient on effect of artificial nanofouling (coating) in oxidized multi-wall carbon nanotube nanofluids. As the result, the CHF of oxidized multi-wall carbon nanofluids and the CHF of artificial nanofouling in the nanofluids increased to maximum 99.2%, 120.88%, respectively. A boiling heat transfer coefficient in nanofluid increased to maximum 24.29% higher than purewater, but artificial nanofouling decreased to maximum -7.96%.

키워드

참고문헌

  1. Das, S. K., Choi, S. U., Yu, W., and Pradeep, T., 2008, Nanofluids:science and technology, John Wiley and Sons.
  2. Barber, J., Brutin, D., and Tadrist, L., 2011, A review on boiling heat transfer enhancement with nanofluids, Nanoscale Research Letters, Vol. 6, p. 280. https://doi.org/10.1186/1556-276X-6-280
  3. Lee, J. and Mudawar I., 2007, Assessment of the effectiveness of nanofluids for single-phase and twophase heat transfer in micro-channels, International Journal of Heat and Mass Transfer, Vol. 50, No. 3/4, pp. 452-463. https://doi.org/10.1016/j.ijheatmasstransfer.2006.08.001
  4. Peng, H., Ding, G., Jiang, W., Hu, H., and Gao, Y., 2009, Heat transfer characteristics of refrigerant-based nanofluid flow boiling inside a horizontal smooth tube, International Journal of Refrigeration, Vol. 32, No. 6, pp. 1259-1270. https://doi.org/10.1016/j.ijrefrig.2009.01.025
  5. Kim, S. J., McKrell, T., Buongiorno, J., and Hu, L. W., 2010, Subcooled flow boiling heat transfer of dilute alumina, zinc oxide, and diamond nanofluids at atmospheric pressure, Nuclear Engineering and Design, Vol. 240, No. 5, pp. 1186-1194. https://doi.org/10.1016/j.nucengdes.2010.01.020
  6. Ahn, H. S., Kim, H. D., Jo, H. J., Kang, S. H., and Chang, W. P., Kim, M. H., 2010, Experimental study of critical heat flux enhancement during forced convective flow boiling of nanofluid on a short heated surface, International Journal of Multiphase Flow, Vol. 36, No. 5, pp. 375-384. https://doi.org/10.1016/j.ijmultiphaseflow.2010.01.004
  7. Park, S. S., Kim, Y. H., Jeon, Y. H., Hyun, M. T., and Kim, N. J., 2015, Effects of spray-deposited oxidized multi-wall carbon nanotubes and graphene on pool-boiling critical heat flux enhancement, Journal of Industrial and Engineering Chemistry, Vol. 24, pp. 276-283. https://doi.org/10.1016/j.jiec.2014.09.041
  8. Park, S. S., Kim, W. J., Kim, J. Y., Jeon, Y. H., and Kim, N. J., 2015, A study on the influence of boiling heat transfer of nanofluid with particle length and mixing ratio of carbon nanotube, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 27, No. 1, pp. 1-7. https://doi.org/10.6110/KJACR.2015.27.1.001
  9. Kline S. J. and McClintock F. A., 1953, Describing uncertainties in single-sample experiment, Mechanical Engineer, Vol. 75, pp. 3-8.
  10. Zuber, N., 1958, On stability of boiling heat transfer, ASME transactions, Vol. 80, pp. 711-714.
  11. Katto, Y. and Kurata, C., 1980, Critical heat flux of saturated convective boiling on uniformly heated plates in a parallel flow, International Journal of Multiplhase Flow, Vol. 6, No. 6, pp. 575-582. https://doi.org/10.1016/0301-9322(80)90052-X
  12. Henderson, K., Park, Y, G., Liu, L., and Jacobi, A. M., 2009, Flow-boiling heat transfer of R-134a-based nanofluids in a horizontal tube, International Journal of Heat and Mass Transfer, Vol. 53, No. 5/6, pp. 944-951.
  13. Sarafraz, M. M., Hormozi, F., and Peyghambarzadeh, S. M., 2015, Role of nanofluid fouling on thermal performance of a thermosyphon:Are nanofluids reliable working fluid?, Applied Thermal Engineering, Vol. 82, pp. 214-224.
  14. Park, S. S., Kim, Y. H., Jeon, Y. H., Hyun., M. T., and Kim, N. J., 2014, Effects of spray-deposited oxidized multi-wall carbon nanotubes and graphene on pool-boiling critical heat flux enhancement, Journal of Industrial and Engineering Chemistry.