Journal of the Korean Wood Science and Technology

  • 제44권2호
  • /
  • Pages.204-217
  • /
  • 2016
  • /
  • 1017-0715(pISSN)
  • /
  • 2233-7180(eISSN)
한국목재공학회 (The Korean Society of Wood Science & Technology)
권호 표지
DOI QR코드

DOI QR Code

Optimization of L-shaped Corner Dowel Joint in Modified Poplar using Finite Element Analysis with Taguchi Method

  • Ke, Qing (College of Materials Science and Technology, Beijing Forestry University) ;
  • Zhang, Fan (College of Materials Science and Technology, Beijing Forestry University) ;
  • Zhang, Yachi (College of Materials Science and Technology, Beijing Forestry University)
  • 투고 : 2016.01.04
  • 심사 : 2016.02.25
  • 발행 : 2016.03.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Modified poplar has emerged as a potential raw material for furniture production. Lack of specific modified poplar strength information; however, restricts applications in the furniture industry especially as related to strength in corner-joints. Optimization of strength in L-shaped corner dowel modified poplar joints under compression loads utilizing finite element analysis (FEA) by Taguchi method with the focus of this study. Four experiment factors (i.e., Structure Style, Tenon Length, Tenon Diameter, and Tenon Gap), each at three levels, were conducted by adopting a $L_9-3^4$ Taguchi orthodoxy array (OA) to determine the optimal combination of factors and levels for the von Mises stress utilizing ANSYS software. Results of Signal-to-Noise ratio (S/N) analysis and the analysis of variance (ANOVA) revealed the optimal L-shaped corner dowel joint in modified poplar is $45^{\circ}$ Bevel Butt in structure style, 24 mm in tenon length, 6 mm in tenon diameter, and 20 mm in tenon gap. Tenon length and tenon gap are determined to be significant design factors for affecting von Mises Stress. Confirmation tests with optimal levels and experimental test indicated the predicted optimal condition is comparable to the actual experimental optimal condition.

키워드

참고문헌

  1. Atar, M., Ozcifci, A., Altinok, M., Celiket, U. 2009. Determination of diagonal compression and tension performance for case furniture corner joints constructed with wood biscuits. Material & Design 30(3): 665-670. https://doi.org/10.1016/j.matdes.2008.05.023
  2. Cai, L.P., Wang, F.H. 1993. Influence of the stiffness of corner joint on case furniture deflection. Holz als Roh-und Werkstoff 51(6): 406-408. https://doi.org/10.1007/BF02628238
  3. Cetin, Y.N. 2012. Effects of glass-fiber composite, dowel, and minifix fasteners on the failure load of corner joints in particleboard case-type furniture. Material & Design 39: 63-71. https://doi.org/10.1016/j.matdes.2012.02.024
  4. Colakoglu, M.H., Apay, A.C. 2012. Finite Element analysis of wooden chair strength in free drop. International Journal of Physical Sciences 7(7): 1105-1114.
  5. Dalvand, M., Ebrahimi, G., Tajvidi, M., Layeghi, M. 2014. Bending moment resistance of dowel corner joints in case-type furniture under diagonal compression load. Journal of Forestry Research 25(4): 981-984. https://doi.org/10.1007/s11676-014-0481-y
  6. Dar, F.H., Meakin, J. R., Aspden, R.M. 2002. Statistical methods in Finite Element analysis. Journal of Biomechanics 35(9): 1155-1161. https://doi.org/10.1016/S0021-9290(02)00085-4
  7. Eckelman, C.A., Rabiej, R. 1984. A comprehensive method of analysis of case furniture. Forest Products Journal 35(4): 62-68.
  8. GB/T 15777-1995 (1995) Method for determination of the modulus of elasticity in compressive parallel to grain of wood. Chinese National Standard.
  9. GB/T 1928-2009 (2009) General requirements for physical and mechanical tests of wood. Chinese National Standard, Beijing, China.
  10. GB/T 10357.2-2013 (2013) Test of mechanical properties of furniture-Part 2: Stability of chairs and stools. Chinese National Standard, Beijing, China.
  11. Gu, F., Hall, P., Miles, N.J., Ding, Q.W., Wu, T. 2014. Improvement of mechanical properties of recycled plastic blends via optimizing processing parameters using the Taguchi method and principal component analysis. Material & Design 62: 189-198. https://doi.org/10.1016/j.matdes.2014.05.013
  12. Gijo, E.V., Scaria, J. 2010. Reducing rejection and rework by application of Six Sigma methodology in manufacturing process. International Journal of Six Sigma and Competitive Advantage 6(1/2): 77-90. https://doi.org/10.1504/IJSSCA.2010.034857
  13. Hill, A.S., Callum, A.S. 2011. Wood Modification. Bioresources 6(2): 918-919.
  14. Oktaee, J., Ebrahimi, G., Layeghi, M., Ghofrani, M., Eckelman, C.A. 2014. Bending moment capacity of simple and haunched mortise and tenon furniture joints under tension and compression loads. Turkish Journal of Agriculture and Forestry 38(2): 291-297. https://doi.org/10.3906/tar-1211-74
  15. Ross, P.J. 1996. Taguchi techniques for quality engineering New York: McGraw-Hill.
  16. Segovia, C., Renaud, A., Pizzi, A. 2011. Performance of Dowel-Welded L-Joints for Wood Furniture. Journal of Adhesion Science and Technology 25(15): 1829-1837. https://doi.org/10.1163/016942410X525722
  17. Smardzewski, J. 1998. Numerical analysis of furniture constructions. Wood Science and Technology 32(4): 273-286. https://doi.org/10.1007/BF00702895
  18. Tankut, A.N., Tankut, N. 2005. The effects of joint forms (shape) and dimensions on the strengths of mortise and tenon joints. Turkish Journal of Agriculture and Forestry 29(6): 493-498.
  19. Tankut, A.N., Tankut, N. 2009. Investigations the effects of fastener, glue, and composite material types on the strength of corner joints in case-type furniture construction. Material & Design 30(10): 4175-4182. https://doi.org/10.1016/j.matdes.2009.04.038
  20. Tankut, A.N., Tankut, N. 2010. Evaluation the effects of edge banding type and thickness on the strength of corner joints in case-type furniture construction. Material & Design 31(6): 2956-2963. https://doi.org/10.1016/j.matdes.2009.12.022
  21. Taguchi, G., Konishi, S. 1987. Taguchi Methods Orthogonal Arrays and Linear Graphs: Tools for Quality Engineering. Dearborn, Michigan: American Supplier Institute.
  22. Taguchi, G. 1990. Introduction to Quality Engineering, Asian Productivity, Tokyo, Japan.
  23. Wu, Y., Wu, A. 2000. Taguchi methods for robust design. New York: The American Society of Mechanical Engineers.