초록
대역통과 표본화(BPS: bandpass sampling) 기술은 아날로그 신호를 디지털 신호로 변환할 때 표본화하고자 하는 신호의 주파수보다 낮은 주파수로 표본화하는 것을 말한다. BPS 처리만으로도 수신 신호의 스펙트럼이 기저대역에 나타나게 되기 때문에 주파수 하향변환기를 사용하지 않을 수 있어 편리하다. 2차 BPS 시스템은 BPS 과정으로 인하여 발생될 수 있는 aliasing 간섭 성분을 제거하고자 2개의 표본화기를 사용하는 장치이다. 본 논문에서는 2차 BPS 시스템의 aliasing 간섭 성분을 최대로 제거하도록 interpolant 필터의 위상을 최적 설계하는 방식을 제시하였다. 이 방식은 수학적으로 유도된 것으로서, BPS 입력 스펙트럼의 어떠한 조건에서도 항상 성립한다. 수신 신호 전력 스펙트럼을 다양하게 변화시키면서 제안된 방식에 따른 성능 개선 효과를 통계적으로 조사하였고, 기존의 준최적 방식과 비교할 때 최대 5~20 [dB]의 성능 개선이 있음을 확인하였다.
In the bandpass sampling(BPS), the sampling frequency for the analog-to-digital converter is lower than that of the signal to be sampled. Since the BPS operation results in the signal spectrum to be copied on the baseband, it is possible for the frequency down-converter to be conveniently omitted. The second-order BPS system is introduced in order to cancel the aliased interference components from the BPS output that may be generated by the BPS processing. In this paper, we introduce a design method for the optimal phase of the interpolant filter in the second-order BPS system which enables to maximally cancel the aliased components. Being mathematically derived, this method can always be applied independently to the spectral characteristics of the BPS input signal. The performance improvements by the suggested method has been measured statistically with various power spectra of the received signal, and it has been shown that the maximal amount of the improvements reaches up to 5~20 [dB] in comparison with the previous suboptimal algorithm.