DOI QR코드

DOI QR Code

정20면체기반 반구형 돔의 일사량과 효율적인 솔라패널에 관한 연구

A Study on Solar Radiation and Efficient Solar Panel of Icosahedron-based Hemispherical Dome

  • 손수덕 (한국기술교육대학교 건축공학부) ;
  • 이돈우 (한국기술교육대학교 건축공학부 대학원) ;
  • 이승재 (한국기술교육대학교 건축공학부)
  • Shon, Su-Deok (School of Arch. Eng., Korea Univ. of Tech. & Education) ;
  • Lee, Don-Woo (School of Arch. Eng., Korea Univ. of Tech. & Education) ;
  • Lee, Seung-Jae (School of Arch. Eng., Korea Univ. of Tech. & Education)
  • 투고 : 2015.12.17
  • 심사 : 2016.02.11
  • 발행 : 2016.03.15

초록

Solar power is being spotlighted recently as a new energy source due to environmental problems and applications of solar power to curved structures are increasing. Solar panels installed on curved surfaces have different efficiencies depending on its position and the efficient positioning of solar panels plays a critical role in the design of solar power generation systems. In this study, the changing characteristics of solar irradiance were analyzed for hemispherical dome with a large curvature and the positioning of solar panels that can efficiently utilize solar energy was investigated. With an icosahedron-based hemispherical dome consisting of triangular elements as target model, a program for calculating solar irradiance using a normal vector of the solar module on each face was developed. Furthermore, the change of solar irradiance according to the sun's path was analyzed by time and season, and its effects on shades were also examined. From the analysis results, the effective positioning could be determined on the basis of the efficiency of the solar panels installed on the dome surfaces on solar irradiance.

키워드

참고문헌

  1. K. Abedi and G.A.R. Parke, "Progressive collapse of single-layer braced domes", International Journal of Space Structures, Vol.11, No.3, pp.291-306, 1991
  2. Th. Bulenda and J. Knippers, "Stability of grid shells", Computers and Structures, Vol.79, pp.1161-1174, 2001 https://doi.org/10.1016/S0045-7949(01)00011-6
  3. T.P. Chang, "The Sun's apparent position and the optimal tilt angle of a solar collector in the northern hemisphere", Solar Energy, Vol.83, pp.1274-1284, 2009 https://doi.org/10.1016/j.solener.2009.02.009
  4. K.K. Choong and Y. Hangai, "Review on methods of bifurcation analysis for geometrically nonlinear structures", Bulletin of the International Association for Shell and Spatial structures, Vol.34, No.112, pp.133-149, 1993
  5. H. Gunerhan and A. Hepbasli, "Determination of the optimum tilt angle of solar collectors for building applications", Building and Environment, Vol.42, 779-783, 2007 https://doi.org/10.1016/j.buildenv.2005.09.012
  6. S.K. Hong and A.S. Choi, "A Study on the Analysis of Solar Radiation on the Building Facade", In proc: The Korean Institute of Illuminating and Electrical Installation Engineers 2010 conference, spring, Korea, pp.105-108, 2011(Korean)
  7. O.S. Idowu, O.M. Olarenwaju and O.J. Ifedayo, "Determination of optimum tilt angles for solar collectors in low-latitude tropical region", International Journal of Energy and Environmental Engineering, Vol.4, No.29, pp.1-10, 2013 https://doi.org/10.1186/2251-6832-4-1
  8. H.M. Jung, "An effect of equipment-loading on the buckling characteristics of single-layer latticed domes", Journal of Korean society of steel construction, Vol.9, No.3, pp.323-332, 1997(Korean)
  9. S. Kato, J. Mutoh and M. Shomura, "Effect in joint rigidity on buckling strength of single layer lattice dome", Bulletin of the International Association for Shell and Spatial Structures, Vol.35, No.115, pp.101-109, 1994
  10. H.J. Kim, "Study on the performance analysis and reliability assessment for BIPV system", PhD Dissertation, Inha University, Korea, 2011(Korean)
  11. J.K. Kim and S.E. Han, "The geometrically nonlinear analysis of single layer latticed domes by mode superposition method", Journal of Architectural Institute of Korea Structure & Construction, Vol.14, No.4, pp.317-325, 1998(Korean)
  12. B.L. Lee, "Silicon solar cell technology", Hongrung Publishing, 2013(Korean)
  13. S.J. Lee and S.D. Shon, "A study on regular traingular mesh modeling of network dome using differential evolution algorithm", Journal of Architecture Institute of Korea Structure & construction, Vol.30, No.5, pp.13-20, 2014(Korean)
  14. A. Lopez, I. Puente and M.A. Serna, "Numerical model and experimental tests on single-layer latticed domes with semi-rigid joints", Computers and Structures, Vol.85, pp.360-374, 2007 https://doi.org/10.1016/j.compstruc.2006.11.025
  15. PVCDROM (http://www.pveducation.org/pvcdrom)
  16. A. Shariah, M.A. Al-Akhras and I.A. Al-Omari, "Optimizing the tilt angle of solar collectors", Renewable Energy, Vol.26, pp.587-598, 2002 https://doi.org/10.1016/S0960-1481(01)00106-9
  17. S.D. Shon, E.S. Kwak and S.J. Lee, "A Study of Modular Dome Structural Modeling with Highly Filled Extrusion Wood-Plastic Composite Member", Journal of Korea institute for Structural Maintenance and Inspection, Vol.19, No.2, pp.76-83, 2015 (Korean) https://doi.org/10.11112/jksmi.2015.19.2.076
  18. K. Skeiker, "Optimum tilt angle and orientation for solar collectors in Syria", Energy Conversion and Management, Vol.50, pp.2439-2448, 2009 https://doi.org/10.1016/j.enconman.2009.05.031
  19. S. Yamada, Y. Matsumoto, A. Sakamoto and J.G.A. Croll, "Design estimation method of buckling load and the associated mode for single layer lattice dome roof with square plan", Proceeding of the IABSE-IASS 2011 symposium, London, Vol.72, 2011