Journal of Korean Dental Science

  • 제9권2호
  • /
  • Pages.74-80
  • /
  • 2016
  • /
  • 2005-4742(pISSN)
  • /
  • 2713-7651(eISSN)
대한치의학회 (Korean Academy of Dental Science)
권호 표지
DOI QR코드

DOI QR Code

A Digital Approach to a Definitive Immediate Denture: A Clinical Report

  • Lee, Ju-Hyoung (Department of Dentistry, Catholic University of Daegu School of Medicine) ;
  • Kim, Hyung Gyun (Department of Dentistry, Catholic University of Daegu School of Medicine)
  • 투고 : 2016.06.04
  • 심사 : 2016.09.30
  • 발행 : 2016.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Even though an immediate denture (ID) is a practical prosthesis, fabricating an ID may be challenging, as unexpected removals of periodontally compromised teeth may occur during an impression procedure. This clinical report introduces a digital approach to a maxillary ID. An intraoral scanner was applied to prevent accidental extraction. A physical cast and a resin pattern of a framework were fabricated with rapid prototyping technology. A proper border and retention was also achieved by an altered cast impression.

키워드

참고문헌

  1. The glossary of prosthodontic terms. J Prosthet Dent. 2005; 94: 10-92. https://doi.org/10.1016/j.prosdent.2005.03.013
  2. Woloch MM. Nontraumatic immediate complete denture placement: a clinical report. J Prosthet Dent. 1998; 80: 391-3. https://doi.org/10.1016/S0022-3913(98)70001-0
  3. Gotlieb AS, Askinas SW. An atypical chairside immediate denture: a clinical report. J Prosthet Dent. 2001; 86: 241-3. https://doi.org/10.1067/mpr.2001.117977
  4. Bissasu M. A simple procedure for minimizing adjustment of immediate complete denture: a clinical report. J Prosthet Dent. 2004; 92: 125-7. https://doi.org/10.1016/j.prosdent.2004.05.006
  5. Zarb GA, Hobkirk JA, Eckert SE, Jacob RF. Prosthodontic treatment for edentulous patients: complete dentures and implant-supported prostheses. 13th ed. St. Louis: Mosby; 2013.
  6. Lee JH. Fabricating an immediate denture for a medically compromised elderly patient. J Prosthet Dent. 2015; 113: 277-81. https://doi.org/10.1016/j.prosdent.2014.09.019
  7. Patzelt SB, Emmanouilidi A, Stampf S, Strub JR, Att W. Accuracy of full-arch scans using intraoral scanners. Clin Oral Investig. 2014; 18: 1687-94. https://doi.org/10.1007/s00784-013-1132-y
  8. Williams RJ, Bibb R, Rafik T. A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying. J Prosthet Dent. 2004; 91: 85-8. https://doi.org/10.1016/j.prosdent.2003.10.002
  9. Eggbeer D, Bibb R, Williams R. The computeraided design and rapid prototyping fabrication of removable partial denture frameworks. Proc Inst Mech Eng H. 2005; 219: 195-202.
  10. Williams RJ, Bibb R, Eggbeer D, Collis J. Use of CAD/CAM technology to fabricate a removable partial denture framework. J Prosthet Dent. 2006; 96: 96-9. https://doi.org/10.1016/j.prosdent.2006.05.029
  11. Bibb RJ, Eggbeer D, Williams RJ, Woodward A. Trial fitting of a removable partial denture framework made using computer-aided design and rapid prototyping techniques. Proc Inst Mech Eng H. 2006; 220: 793-7.
  12. Goodacre CJ, Garbacea A, Naylor WP, Daher T, Marchack CB, Lowry J. CAD/CAM fabricated complete dentures: concepts and clinical methods of obtaining required morphological data. J Prosthet Dent. 2012; 107: 34-46. https://doi.org/10.1016/S0022-3913(12)60015-8
  13. Bidra AS, Taylor TD, Agar JR. Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future perspectives. J Prosthet Dent. 2013; 109: 361-6. https://doi.org/10.1016/S0022-3913(13)60318-2
  14. Kattadiyil MT, Goodacre CJ, Baba NZ. CAD/CAM complete dentures: a review of two commercial fabrication systems. J Calif Dent Assoc. 2013; 41: 407-16.
  15. Lang LA, Tulunoglu I. A critically appraised topic review of computer-aided design/computeraided machining of removable partial denture frameworks. Dent Clin North Am. 2014; 58: 247-55. https://doi.org/10.1016/j.cden.2013.09.006
  16. Infante L, Yilmaz B, McGlumphy E, Finger I. Fabricating complete dentures with CAD/CAM technology. J Prosthet Dent. 2014; 111: 351-5. https://doi.org/10.1016/j.prosdent.2013.10.014
  17. Kim MS, Lee JY, Shin SW. Fabricating an obturator using rapid prototyping to design the framework: a case report. Int J Prosthodont. 2014; 27: 439-41. https://doi.org/10.11607/ijp.3838
  18. Kattadiyil MT, Mursic Z, AlRumaih H, Goodacre CJ. Intraoral scanning of hard and soft tissues for partial removable dental prosthesis fabrication. J Prosthet Dent. 2014; 112: 444-8. https://doi.org/10.1016/j.prosdent.2014.03.022
  19. Mansour M, Sanchez E, Machado C. The use of digital impressions to fabricate tooth-supported partial removable dental prostheses: a clinical report. J Prosthodont. 2016; 25: 495-7. https://doi.org/10.1111/jopr.12346
  20. Lin WS, Chou JC, Metz MJ, Harris BT, Morton D. Use of intraoral digital scanning for a CAD/ CAM-fabricated milled bar and superstructure framework for an implant-supported, removable complete dental prosthesis. J Prosthet Dent. 2015; 113: 509-15. https://doi.org/10.1016/j.prosdent.2015.01.014
  21. McLaughlin JB, Ramos V Jr. Complete denture fabrication with CAD/CAM record bases. J Prosthet Dent. 2015; 114: 493-7. https://doi.org/10.1016/j.prosdent.2015.04.017
  22. Bilgin MS, Erdem A, Aglarci OS, Dilber E. Fabricating complete dentures with CAD/CAM and RP technologies. J Prosthodont. 2015. doi:10.1111/jopr.12302. [Epub ahead of print]
  23. Baskin SM, Lipchik GL, Smitherman TA. Mood and anxiety disorders in chronic headache. Headache. 2006; 46(Suppl 3): S76-87. https://doi.org/10.1111/j.1526-4610.2006.00559.x
  24. Griffith JL, Razavi M. Pharmacological management of mood and anxiety disorders in headache patients. Headache. 2006; 46(Suppl 3): S133-41. https://doi.org/10.1111/j.1526-4610.2006.00564.x
  25. Lee JH, Lee KB. Alternative antireflection substance for a digital impression. J Prosthet Dent. 2015; 114: 460-1. https://doi.org/10.1016/j.prosdent.2015.04.008
  26. Patzelt SB, Vonau S, Stampf S, Att W. Assessing the feasibility and accuracy of digitizing edentulous jaws. J Am Dent Assoc. 2013; 144: 914-20. https://doi.org/10.14219/jada.archive.2013.0209
  27. Leupold RJ, Kratochvil FJ. An altered-cast procedure to improve tissue support for removable partial dentures. J Prosthet Dent. 1965; 15: 672-8. https://doi.org/10.1016/0022-3913(65)90038-7
  28. Holmes JB. The altered cast impression procedure for the distal extension removable partial denture. Dent Clin North Am. 1970; 14: 569-82.
  29. Lee JH, Cho SA. Altered polyurethane cast for a partial removable dental prosthesis. J Prosthet Dent. 2015; 114: 305-6. https://doi.org/10.1016/j.prosdent.2015.02.011
  30. Hobo S, Shillingburg HT Jr, Whitsett LD. Articulator selection for restorative dentistry. J Prosthet Dent. 1976; 36: 35-43. https://doi.org/10.1016/0022-3913(76)90231-6
  31. Rosenstiel SF, Land MF, Fujimoto J. Contemporary fixed prosthodontics. 4th ed. St. Louis: Mosby Elsevier; 2006. p. 45-9.
  32. Jerbi FC. Trimming the cast in the construction of immediate dentures. J Prosthet Dent. 1966; 16: 1047-53. https://doi.org/10.1016/0022-3913(66)90170-3
  33. Phoenix RD, Fleigel JD. Cast modification for immediate complete dentures: traditional and contemporary considerations with an introduction of spatial modeling. J Prosthet Dent. 2008; 100: 399-405. https://doi.org/10.1016/S0022-3913(08)60244-9
  34. Bourgoyne JR. Alveoloplasty in preparation for the immediate denture insertion. J Prosthet Dent. 1951; 1: 254-67. https://doi.org/10.1016/0022-3913(51)90058-3
  35. Loney RW, Knechtel ME. Diagnosing denture problems using pressure-indicating media. J Prosthet Dent. 2009; 101: 137-41. https://doi.org/10.1016/S0022-3913(09)60009-3