References
- 2011, Lee, J.H., "Greenhouse Gases Reduction Technology Strategy Road Map: Heat Exchanger," (in Korean) Korea Institute of Energy Technology Evaluation and Planning.
- 1988, Mueller, A.C. and Chiou, J.P., "Review of Various Types of Flow Maldistribution in heat Exchangers," Heat Transfer Engineering, Vol.9, No.2, pp.36-50. https://doi.org/10.1080/01457638808939664
- 2006, Wen, J., Li, Y., Zhou, A. and Zhang, K., "An Experimental and Numerical Investigation of Flow Patterns in the Entrance of Plate-Fin Heat Exchanger," Int. J. of Heat and Mass Transfer, Vol.49, pp.1667-1678. https://doi.org/10.1016/j.ijheatmasstransfer.2005.10.029
- 2004, Wen, J. and Li, Y., "Study of Flow Distribution and Its Improvement on The Header of Plate-Fin Heat Exchanger," Cryogenics, Vol.44, pp.823-841. https://doi.org/10.1016/j.cryogenics.2004.04.009
- 2013, Mohammadi, K. and Malayeri, M.R., "Parametric Study of Gross Flow Maldistribution in a Single-pass Shell and Tube Heat Exchanger in Turbulent Regime," Int. J. of Heat and Fluid Flow, Vol.44, pp.14-27. https://doi.org/10.1016/j.ijheatfluidflow.2013.02.010
- 2013, Tu, C., Wang, K., Park, S. and Kim, H., "Experimental Study of Inlet/Outlet Flow Characteristics of Tube-side in the Shell and Tube Heat Exchanger," (in Korean) J. KSME.(B), Vol.38, No.7, pp.581-588.
- 2015, Wang, K., Tu, C., Bae, C. and Kim, H., "Optimal Design of Porous Baffle to Improve the Flow Distribution in the Tube-side Inlet of a Shell and Tube Heat Exchanger," Int. J. of Heat and Mass Transfer, Vol.80, pp.865-872. https://doi.org/10.1016/j.ijheatmasstransfer.2014.09.076
- 2014, Park, Y.M., Chung, H.T. and Kim, H.B., "Numerical Study on the Performance Characteristics of Shell and Tube Heat Exchangers: Part(I)_ Flow Characteristics," (in Korean) J. Compt. Fluids Eng., Vol.19, No.3, pp.20-23.
- 2013, Wang, K, Tu, C. and Kim, H., "CFD Simulation and PIV measurement of a shell and tube heat exchanger," PFVIP-9, Busan, Korea, pp.398-401.
- 2007, "CFX User's Guide," ANSYS Inc.,.
- 2015, Tu, C., Kim, S., Chung, H. and Kim, H., "Experimental Study on the Complex Features in the Inlet of STHX by Flow Distributors," ISMAI-10, Jinju, Korea, pp.233-234.
- 2015, Wang, J., Chung, H. and Kim, H., "Numerical Simulation of the Effect of the Inlet Flow Conditions on the Heat Transfer inside the Circular Tube," ISMAI-10, Jinju, Korea, pp.227-232.