Computers and Concrete

  • 제17권3호
  • /
  • Pages.387-406
  • /
  • 2016
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Transverse reinforcement for confinement at plastic hinge of circular composite hollow RC columns

  • Won, Deok Hee (Coastal Engineering Division, Korea Institute of Ocean Science and Technology) ;
  • Han, Taek Hee (Coastal Engineering Division, Korea Institute of Ocean Science and Technology) ;
  • Kim, Seungjun (Department of Geotechnical Disaster Prevention, Daejeon University) ;
  • Park, Woo-Sun (Coastal Engineering Division, Korea Institute of Ocean Science and Technology) ;
  • Kang, Young Jong (Department of Architectural, Civil and Environmental Engineering, Korea University)
  • 투고 : 2015.10.05
  • 심사 : 2016.01.25
  • 발행 : 2016.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

Confined transverse reinforcement was arranged in a plastic hinge region to resist the lateral load that increased the lateral confinement effect in the bridge substructure. Columns increased the seismic performance through securing stiffness and ductility. The calculation method of transverse reinforcements at plastic hinges is reported in the AASHTO-LRFD specification. This specification was only proposed for solid reinforced concrete (RC) columns. Therefore, if this specification is applied for another column as composite column besides the solid RC column, the column cannot be properly evaluated. The application of this specification is particularly limited for composite hollow RC columns. The composite hollow RC column consists of transverse, longitudinal reinforcements, cover concrete, core concrete, and an inner tube inserted in the hollow face. It increases the ductility, strength, and stiffness in composite hollow RC columns. This paper proposes a modified equation for economics and rational design through investigation of displacement ductility when applying the existing specifications at the composite hollow RC column. Moreover, a parametric study was performed to evaluate the detailed behavior. Using these results, a calculation method of economic transverse reinforcements is proposed.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea

참고문헌

  1. AASHTO, LRFD (2007), Bridge Design Specifications, American Association of State Highway and Transportation Officials, SI Unit, 3rd Edition, Washington, DC, USA.
  2. ACI Committee, American Concrete Institute and International Organization for Standardization (2008), Building code requirements for structural concrete (ACI 318-08) and commentary, American Concrete Institute.
  3. Burak, Y. and Yusuf, C. (2014), "Effects of confinement reinforcement and concrete strength on nonlinear behaviour of RC buildings", Comput. Concrete, 14(3), 279-297. https://doi.org/10.12989/cac.2014.14.3.279
  4. Gholamreza, G.A., Azadeh, J.J. and Benyamin, M. (2012), "Determination of plastic hinge properties for static nonlinear analysis of FRP-strengthened circular columns in bridges", Comput. Concrete, 10(5), 435-455. https://doi.org/10.12989/cac.2012.10.5.435
  5. Haftka, R.T., Mallet, R.H. and Nachbar, W. (1971), "Adaptation of Koiter's method to finite element analysis of snap-through buckling behaviour", Int. J. Solid Struct., 10, 1427-1445.
  6. Han, T.H., Lim, N.H., Han, S.Y., Park, J.S. and Kang, Y.J. (2008), "Nonlinear concrete model for an internally confined hollow reinforced concrete column", Mag. Concre Res., 60(6), 429-40. https://doi.org/10.1680/macr.2008.60.6.429
  7. Han, T.H., Stallings, J.M., Cho, S.K. and Kang, Y.J.(2010), "Behaviour of a hollow RC column with an internal tube", Mag. Concrete Res., 62(1), 25-38. https://doi.org/10.1680/macr.2008.62.1.25
  8. Han, T.H., Yoon, K.Y. and Kang, Y.J. (2010), "Compressive strength of circular hollow reinforced concrete confined by an internal steel tube", Constr. Build. Mater., 24(9), 1690-1699. https://doi.org/10.1016/j.conbuildmat.2010.02.022
  9. Kerr, A.D. and Soifer, M.T. (1969), "The linearization of the prebuckling state and its effects on the determined instability load", J. Appl. Mech., 36(4), 775-785. https://doi.org/10.1115/1.3564770
  10. Kilpatrick, A.E. and Ranagan, B.V. (1997), "Deformation-control analysis of composite concrete columns", Research Report No. 3/97, School of Civil Engineering, Curtin University of Technology, Perth, Western Australia.
  11. Kim, T.H. (2014), "Structural performance assessment of deteriorated reinforced concrete bridge piers", Comput. Concrete, 14(4), 387-403. https://doi.org/10.12989/cac.2014.14.4.387
  12. Mander, J.B., Priestly, M.J.N. and Park, R. (1984), "Seismic design of bridge piers", Research Report No. 84-2, University of Canterbury, New Zealand.
  13. Ou, Y.C., Kurniawan, R.A., Kurniawan, D.P. and Nguyen, N.D. (2012), "Plastic hinge length of circular reinforced concrete columns", Comput. Concrete, 10(6), 663-681. https://doi.org/10.12989/cac.2012.10.6.663
  14. Park, R. (1988), "Ductility evaluation from laboratory and analytical testing", Proceedings of the 9th World Conference on Earthquake Engineering, Tokyo, 8, 605-616.
  15. Popovics, S. (1973), "A numerical approach to the complete stress-strain curves of concrete", Cement Concrete Res., 3(5), 583-599. https://doi.org/10.1016/0008-8846(73)90096-3
  16. Priestley, M.J.N., Seible, F. and Calvi, G.M. (1996), Seismic design and retrofit of bridges, Wiley, New York.
  17. Song, Z. and Lu, Y. (2011), "Numerical simulation of concrete confined by transverse reinforcement", Comput. Concrete, 8(1), 23-41. https://doi.org/10.12989/cac.2011.8.1.023
  18. Sun, S.M. and Natori, M.C. (1996), "Numerical solution of large deformation problems involving stability and unilateral constraints", Comput. Struct., 58(6), 1245-1260. https://doi.org/10.1016/0045-7949(95)00081-X
  19. Won, D.H, Han, T.H., Kim, J.H., Choi, J.H. and Kang, Y.J.(2012), "A parametric study on seismic performance of internally confined hollow RC columns", J. Korea Soc. Adv. Comp. Struct., 3(2), 28-35. https://doi.org/10.11004/kosacs.2012.3.2.028

피인용 문헌

  1. Study on the performance of concrete-filled steel tube beam-column joints of new types vol.26, pp.6, 2020, https://doi.org/10.12989/cac.2020.26.6.547