DOI QR코드

DOI QR Code

Modeling the polypropylene fiber effect on compressive strength of self-compacting concrete

  • 투고 : 2015.01.06
  • 심사 : 2016.01.22
  • 발행 : 2016.03.25

초록

Although the self-compacting concrete (SCC) offers several practical and economic benefits and quality improvement in concrete constructions, in comparison with conventionally vibrated concretes confronts with autogenously chemical and drying shrinkage which causes the formation of different cracks and creates different problems in concrete structures. Using different fibers in the mix design and implementation of fibrous concrete, the problem can be solved by connecting cracks and micro cracks together and postponing the propagation of them. In this study an experimental investigation using response surface methodology (RSM) based on full factorial design has been undertaken in order to model and evaluate the polypropylene fiber effect on the fibrous self-compacting concrete and curing time, fiber percentage and fiber amount have been considered as input variables. Compressive strength has been measured and calculated as the output response to achieve a mathematical relationship between input variables. To evaluate the proposed model analysis of variance at a confidence level of 95% has been applied and finally optimum compressive strength predicted. After analyzing the data, it was found that the presented mathematical model is in very good agreement with experimental results. The overall results of the experiments confirm the validity of the proposed model and this model can be used to predict the compressive strength of fibrous self-compacting concrete.

키워드

참고문헌

  1. Alberti, M.G., Enfedaque, A. and Galvez, J C. (2014), "On the mechanical properties and fracture behavior of polyolefin fiber-reinforced self-compacting concrete", Constr. Build. Mater., 55, 274-288. https://doi.org/10.1016/j.conbuildmat.2014.01.024
  2. Aldahdooh, M.A.A., Bunnori, N.M. and Johari, M.M. (2013), "Evaluation of ultra-high-performance-fiber reinforced concrete binder content using the response surface method", Mater. Des., 52, 957-965. https://doi.org/10.1016/j.matdes.2013.06.034
  3. Almeida Filho, F.M., Barragan, B.E., Casas, J.R. and El Debs, A.L.H. (2010), "Hardened properties of selfcompacting concrete-A statistical approach", Constr. Build. Mater., 24(9), 1608-1615. https://doi.org/10.1016/j.conbuildmat.2010.02.032
  4. Association, P.C. (1990), "Fiber reinforced concrete", Portland Cement Assn.
  5. Azadbeh, M., Mohammadzadeh, A. and Danninger, H. (2014), "Modeling the response of physical and mechanical properties of Cr-Mo prealloyed sintered steels to key manufacturing parameters", Mater. Des., 55, 633-643. https://doi.org/10.1016/j.matdes.2013.10.032
  6. Azadbeh, M., Mohammadzadeh, A., Danninger, H. and Gierl-Mayer, C. (2015), "On the densification and elastic modulus of sintered cr-mo steels", Metall. Mater. Trans. B, 46(3), 1471-1483. https://doi.org/10.1007/s11663-015-0315-0
  7. Balaguru, P. and Slattum, K. (1995), Test methods for durability of polymeric fibers in concrete and UV light exposure, Special Publication, 155, 115-136.
  8. Balaguru, P.N. and Shah, S.P. (1992), Fiber-reinforced cement composites, McGraw-Hill Inc., New York.
  9. Bayramov, F., Tasdemir, C. and Tasdemir, M.A. (2004), "Optimisation of steel fibre reinforced concretes by means of statistical response surface method", Cement Concrete Comp., 26(6), 665-675. https://doi.org/10.1016/S0958-9465(03)00161-6
  10. Bentur, A. and Mindess, S. (1990), Fibre reinforced cementitious composites, First edition Elsevier, Appl. Sci., London.
  11. Bibm, C. and Ermco, E. (2005), EFNARC The European guidelines for self-compacting concrete.
  12. Box, G.E., Hunter, W.G. and Hunter, J.S. (1978), Statistics for experimenters: an introduction to design, data analysis, and model building, John Wiley & Sons, New York.
  13. Brown, R., Shukla, A. and Natarajan, K.R. (2002), "Fiber reinforcement of concrete structures", University of Rhode Island, URITC PROJECT NO. 536101.
  14. Cai, L., Wang, H. and Fu, Y. (2013), "Freeze-thaw resistance of alkali-slag concrete based on response surface methodology", Constr. Build. Mater., 49, 70-6. https://doi.org/10.1016/j.conbuildmat.2013.07.045
  15. Cihan, M.T., Guner, A. and Yuzer, N. (2013), "Response surfaces for compressive strength of concrete", Constr. Build. Mater., 40, 763-74. https://doi.org/10.1016/j.conbuildmat.2012.11.048
  16. Clive, M., Teresa, C. and William, A. (1998), Polypropylene. The definitive user's guide and databook, Plastic Design Library, 126.
  17. Del Coz Diaz, J.J., Garcia-Nieto, P.J., Alvarez-Rabanall, F.P., Alonso-Martinez, M., Dominguez-Hernandez, J. and Perez-Bella, J.M. (2014), "The use of response surface methodology to improve the thermal transmittance of lightweight concrete hollow bricks by FEM", Constr. Build. Mater., 52, 331-44. https://doi.org/10.1016/j.conbuildmat.2013.11.056
  18. Guneyisi, E., Gesoglu, M., Algin, Z. and Mermerdas, K. (2014), "Optimization of concrete mixture with hybrid blends of metakaolin and fly ash using response surface method", Compos. Part B: Eng., 60, 707-715. https://doi.org/10.1016/j.compositesb.2014.01.017
  19. Hannant, P. (1978), Fibre cements and fibre concretes, John Wiley and Sons, ltd., New York.
  20. Lovato, P.S., Possan, E., Molin, D.C.C.D., Masuero, A.B. and Ribeiro, J.L.D. (2012), "Modeling of mechanical properties and durability of recycled aggregate concretes", Constr. Build. Mater., 26(1), 437-47. https://doi.org/10.1016/j.conbuildmat.2011.06.043
  21. Mohammadzadeh, A., Azadbeh, M. and Namini, S.A. (2014), "Densification and volumetric change during supersolidus liquid phase sintering of prealloyed brass Cu28Zn powder: modeling and optimization", Sci. Sinter., 46(1), 23-35. https://doi.org/10.2298/SOS1401023M
  22. Mohammed, B.S., Fang, O.C., Anwar Hossain, K.M. and Lachemi, M. (2012), "Mix proportioning of concrete containing paper mill residuals using response surface methodology", Constr. Build. Mater., 35, 63-8. https://doi.org/10.1016/j.conbuildmat.2012.02.050
  23. Montgomery, D.C. (2008), Design and Analysis of Experiments, John Wiley & Sons.
  24. Mozammel, M. and Mohammadzadeh, A. (2015), "The influence of pre-oxidation and leaching parameters on Iranian ilmenite concentrate leaching efficiency: optimization and measurement", Measur., 66, 184-194.
  25. Myers, R.H. and Anderson-Cook, C.M. (2009), Response surface methodology: pocess and product optimization using designed experiments, 3rd Edition, Wiley.
  26. Nambiar, E. and Ramamurthy, K. (2006), "Models relating mixture composition to the density and strength of foam concrete using response surface methodology", Cement Concrete Comp., 28(9), 752-60. https://doi.org/10.1016/j.cemconcomp.2006.06.001
  27. Oucief, H., Habita, M.F. and Redjel, B. (2006), "Hybrid fiber reinforced self-compacting concrete: hardened properties", Int. J. Civ. Eng., 4(2), 77-85.

피인용 문헌

  1. Effect of specimen geometry and specimen preparation on the concrete compressive strength test vol.62, pp.1, 2016, https://doi.org/10.12989/sem.2017.62.1.097
  2. Experimental study on the fracture toughness of concrete reinforced with multi-size polypropylene fibres vol.71, pp.9, 2016, https://doi.org/10.1680/jmacr.17.00474