DOI QR코드

DOI QR Code

Structural monitoring and identification of civil infrastructure in the United States

  • Nagarajaiah, Satish (Department of Civil and Environmental Engineering, Rice University) ;
  • Erazo, Kalil (Department of Civil and Environmental Engineering, Rice University)
  • 투고 : 2015.12.17
  • 심사 : 2016.03.04
  • 발행 : 2016.03.25

초록

Monitoring the performance and estimating the remaining useful life of aging civil infrastructure in the United States has been identified as a major objective in the civil engineering community. Structural health monitoring has emerged as a central tool to fulfill this objective. This paper presents a review of the major structural monitoring programs that have been recently implemented in the United States, focusing on the integrity and performance assessment of large-scale structural systems. Applications where response data from a monitoring program have been used to detect and correct structural deficiencies are highlighted. These applications include (but are not limited to): i) Post-earthquake damage assessment of buildings and bridges; ii) Monitoring of cables vibration in cable-stayed bridges; iii) Evaluation of the effectiveness of technologies for retrofit and seismic protection, such as base isolation systems; and iv) Structural damage assessment of bridges after impact loads resulting from ship collisions. These and many other applications show that a structural health monitoring program is a powerful tool for structural damage and condition assessment, that can be used as part of a comprehensive decision-making process about possible actions that can be undertaken in a large-scale civil infrastructure system after potentially damaging events.

키워드

참고문헌

  1. Abdel-Ghaffar, A. and Scanlan, R. (1985a), "Ambient vibration studies of Golden Gate bridge: I. suspended structure", J. Eng. Mech.-ASCE, 111(4), 463-482. https://doi.org/10.1061/(ASCE)0733-9399(1985)111:4(463)
  2. Abdel-Ghaffar, A. and Scanlan, R. (1985b), "Ambient vibration studies of Golden Gate bridge: II. pier-tower structure", J. Eng. Mech.-ASCE, 111(4), 483-499. https://doi.org/10.1061/(ASCE)0733-9399(1985)111:4(483)
  3. American Society of Civil Engineers (2013), Report card for America's infrastructure.
  4. Bernal, D., Kojidi, S.M., Kwan, K. and Dohler, M. (2012), "Damping identification in buildings from earthquake records", Proceedings of the SMIP seminar on utilization of strong-motion data.
  5. Betti, R., Khazem, D., Carlos, M., Gostautas, R. and Virmani, Y. (2014), Corrosion monitoring research for city of New York bridges, U.S. Department of Transportion, FHWA-HRT-14-023 Report.
  6. Bishop, R. and Gladwell, G. (1961), "An investigation into the theory of resonance testing", Philos. T. R. Soc. A, 255, 241-280.
  7. Brincker, R., Zhang, L. and Andersen, P. (2000), "Modal identification from ambient responses using frequency domain decomposition", Proceedings of the 18th International Modal Analysis Conference (IMAC).
  8. Catbas, F., Kijewski-Correa, T. and Aktan, A. (2011), Structural identification of constructed facilities, ASCE SEI Committee on Structural Identification of Constructed Systems Report.
  9. Celebi, M. (1995), "Successful performance of base-isolated hospital building during the 17 january 1994 northridge earthquake", Struct. Des. Tall Build., 5, 95-109.
  10. Celebi, M. and Liu, H. (1996), "Before and after retrofit response of a building during ambient and strong-motions", Proceedings of the 8th US national conference on wind engineering.
  11. Chen, G., Yan, D., Wang, W., Zheng, M., Ge, L. and Liu, F. (2007), Assessment of the Bill Emerson Memorial cable-stayed bridge based on seismic instrumentation data, Missouri Department of Transportation Report OR08-003.
  12. Cimellaro, G.P., Reinhorn, A.M. and Bruneau, M. (2010), "Framework for analytical quantification of disaster resilience", Eng. Struct., 3, 639-3649.
  13. Crosby, P., Kelly, J. and Singh, J. (2004), "Utilizing visco-elastic dampers in the seismic retrofit of a thirteen story steel framed building", Proceedings of the ASCE Structures Congress XII.
  14. Ettouney, M. and Alampalli, S. (2012), Infrastructure Health in Civil Engineering, CRC Press.
  15. Farrar, C., Doebling, S. and Nix, D. (2001), "Vibration-based structural damage identification", Philos. T. R. Soc. A, 359, 131-149. https://doi.org/10.1098/rsta.2000.0717
  16. Farrar, C. and Worden, K. (2013), Structural health monitoring, a machine learning perspective, John Wiley and Sons, Ltd, United Kingdom.
  17. Hamburguer, R. (1997), "FEMA-173 seismic rehabilitation guidelines: the next step, verification", Proceedings of the SMIP97 seminar on utilization of strong-motion data.
  18. Hartnagel, B., O'Connor, J., Yen, W., Clogston, P. and Celebi, M. (2006), "Planning and implementation of a seismic monitoring system for the Bill Emerson Memorial Bridge in Cape Girardeau, MO", Proceedings of the ASCE Structures Congress.
  19. Hawk, H. (2003), Life-cycle cost analysis NCHRP report 483, Transportation Research Board.
  20. He, X., Moaveni, B., Conte, J., Elgamal, A. and Masri, S. (2009), "System identification of Alfred Zampa Memorial Bridge using dynamic field test data", J. Struct. Eng.-ASCE, 135(1), 54-66. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:1(54)
  21. Huang, M., Shakal, A., Petersen, C., Celebi, M., Hooper, J. and Klemencic, R. (2012), "Strong motion instrumentation of a 62-story concrete core residential building in San Francisco", SMIP Seminar Proceedings.
  22. Ingham, T., Rodriguez, S. and Nader, M. (1997), "Nonlinear analysis of the Vincent Thomas Bridge for seismic retrofit", Comput. Struct., 64(5-6), 1221-1238. https://doi.org/10.1016/S0045-7949(97)00031-X
  23. Inman, D., Farrar, C. and Lopes, V. (2005), Damage Prognosis: For Aerospace, Civil and Mechanical Systems, Wiley.
  24. Ivanovic, S., Trifunac, M., Novikova, E., Gladkov, A. and Todorovska, M. (2000), "Ambient vibration tests of a seven-story reinforced concrete building in Van Nuys, California, damaged by the 1994 Northridge earthquake", Soil Dynam. Earthq. Eng., 19(6), 391-411. https://doi.org/10.1016/S0267-7261(00)00025-7
  25. James III, G., Carne, T. and Lauffer, J. (1993), The natural exciation technique (NExT) for modal parameter extraction from operating wind turbines, Sandia National Laboratories, SAND921666.
  26. Juan, J.N. and Pappa, R. (1985), "An eigensystem realization algorithm for modal parameter identification and model reduction", J. Guidance, Control Dynam., 8(5), 620-627. https://doi.org/10.2514/3.20031
  27. Kelly, J. (1993), "Seismic isolation, passive energy dissipation and active control", Proceedings of the ATC 171 seminar on state of the art and state of the practice of base isolation.
  28. Kijewski-Correa, T., Kilpatrick, J., Kareem, A., Kwon, D.K., Bashor, R., Kochly, M., Young, B., Abdelrazaq, A., Galsworthy, J., Isyumov, N., Morrish, D., Sinn, R. and Baker, W. (2006), "Validating wind-induced response of tall buildings: Synopsis of the Chicago full-scale monitoring program", J. Struct. Eng.-ASCE, 132(10), 1509-1523. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:10(1509)
  29. Kijewski-Correa, T., Taciroglu, E. and Beck, J. (2008), "System identification of constructed facilities: Challenges and opportunities across hazards", Proceedings of the ASCE Structures Congress.
  30. Kijewski-Correa, T. (2009), "Full-scale monitoring", Struct. Magazine, 14, 14-17.
  31. Klemencic, R., Fry, J. and Hooper, J. (2006), "Performance-based design of tall reinforced concrete ductile core wall systems", Struct. Des. Tall Spec. Build., 15(5), 571-579. https://doi.org/10.1002/tal.383
  32. Krawinkler, H. (1996), "Earthquake design and performance of steel structures", Bulletin of the New Zealand national society for earthquake engineering, 29(4), 229-241.
  33. Mahin, S. (1998), "Lessons from damage to steel buildings during the Northridge earthquake", Eng. Struct., 20(4-6), 261-270. https://doi.org/10.1016/S0141-0296(97)00032-1
  34. Maia, N. and Silva, J. (1998), Theoretical and Experimental Modal Analysis, Research Studies Press LTD, England.
  35. Moaveni, B., Hurlebaus, S. and Moon, F. (2013). "Special issue on real-world applications of structural identification and health monitoring methodologies", J. Struct. Eng.-ASCE, 139(10), 1637-1638. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000779
  36. Naeim, F. (2013), Real-Time Damage Detection and Performance Evaluation for Buildings, Springer Environmental Science and Engineering.
  37. Nagarajaiah, S. and Sun, X. (1995), "Response of base isolated buildings during the 1994 Northridge earthquake", Proceedings of the SMIP-95 Seminar.
  38. Nagarajaiah, S. and Xiaohong, S. (2000), "Response of base-isolated USC hospital building in Northridge earthquake", J. Struct. Eng.-ASCE, 126(10), 1177-1186. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:10(1177)
  39. Nagarajaiah, S. and Sun, X. (2001), "Base-isolated FCC building: Impact response in Northridge earthquake", J. Struct. Eng.-ASCE, 127(9), 1063-1075. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:9(1063)
  40. Overschee, P.V. and Moor, B.D. (1996), Subspace identification for linear systems, Kluwer Academic Publishers.
  41. Pakzad, S.N., Fenves, G.L., Kim, S. and Culler, D.E. (2008), "Design and Implementation of Scalable Wireless Sensor Network for Structural Monitoring", J. Infrastruct. Syst.-ASCE, 14(1), 89-101 https://doi.org/10.1061/(ASCE)1076-0342(2008)14:1(89)
  42. Pasala, D., Sarlis, A., Nagarajaiah, S., Reinhorn, A., Constantinou, M. and Taylor, D. (2013), "Adaptive negative stiffness device: New structural modification approach for seismic protection", J. Struct. Eng.-ASCE, 139, 1112-1123. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000615
  43. Polidori, D., Vanik, M., Scott, M. and Beck, J. (1997), "Ambient vibration surveys of a steel frame building damaged in the Northridge earthquake", Proceedings of the NEHRP Conference and Workshop on Research on the Northridge, California Earthquake of January 17.
  44. Shakal, A., Huang, M., Darragh, R., Cao, T., Sherburne, R., Malhotra, P., Cramer, C., Sydnor, R., Graizer, V., Maldonado, G., Petersen, C. and Wampole, J. (1994), CSMIP strong motion records from the Northridge earthquake of 17 January 1994, Rep. No. OSMS. 94-07, California Strong Motion Instrumentation Program, Division of Mines and Geology, Sacramento, California.
  45. Smyth, A., Pei, J. and Masri, S. (2003), "System identification of the Vincent Thomas suspension bridge using earthquake records", Earthq. Eng. Struct. D., 32, 339-367. https://doi.org/10.1002/eqe.226
  46. Soyoz, S., Taciroglu, E., Orakcal, K., Nigbor, R., Skolnik, D., Lus, H. and Safak, E. (2013), "Ambient and forced vibration testing of a reinforced concrete building before and after its seismic retrofitting", J. Struct. Eng.-ASCE, 139(10), 1741-1752. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000568
  47. Todorovska, M. and Trifunac, M. (2000), "Learning from structural and nonstructural seismic performance of 20 extensively instrumented buildings", Proceedings of the 12th World Conference on Earthquake Engineering, Paper No. 0217.
  48. Todorovska, M. and Trifunac, M. (2008), "Impulse response analysis of the Van Nuys 7-storey hotel during 11 earthquakes and earthquake damage detection", Struct. Control Health Monit., 15(1), 90-116. https://doi.org/10.1002/stc.208
  49. U.S. Department of Homeland Security (2010), "Aging infrastructure: Issues, research, and technology", Building and Infrastructure Protection Series.
  50. U.S. Department of Transportation (2010), "Inspection of gusset plates using non-destructive evaluation technologies", FHA Technical Advisory, T 5140.31(HIBT-30).
  51. U.S. National Transportation Safety Board (2007), "Highway accident report: Collapse of I-35W Highway Bridge".
  52. Wills, M. (2007), Photograph distributed under a cc-by 2.0 license.
  53. Yun, H., Nayeri, R., Tasbihgoo, F., Wahbeh, M., Caffrey, J., Wolfe, R., Nigbor, R., Masri, S.F., Abdel-Ghaffar, A. and Sheng, L.H. (2008), "Monitoring the collision of a cargo ship with the Vincent Thomas Bridge", Struct. Control Health Monit., 15(2), 183-206. https://doi.org/10.1002/stc.213
  54. Zuo, D. and Jones, N. (2005), Stay-cable vibration monitoring of the Fred Hartman Bridge (Houston, Texas) and the Veterans Memorial Bridge (Port Arthur, Texas), FHWA/TX-06/0-1401-2 Report.

피인용 문헌

  1. Improving substructure identification accuracy of shear structures using virtual control system vol.27, pp.2, 2018, https://doi.org/10.1088/1361-665X/aaa46f
  2. Fatigue Reliability Assessment of a Long-Span Cable-Stayed Bridge Based on One-Year Monitoring Strain Data vol.24, pp.1, 2019, https://doi.org/10.1061/(ASCE)BE.1943-5592.0001337
  3. Structural Health Monitoring and Interface Damage Detection for Infill Reinforced Concrete Walls in Seismic Retrofit of Reinforced Concrete Frames Using Piezoceramic-Based Transducers Under the Cyclic Loading vol.9, pp.2, 2019, https://doi.org/10.3390/app9020312
  4. Seismic Health Monitoring of a Space Reinforced Concrete Frame Structure Using Piezoceramic-Based Sensors vol.32, pp.3, 2019, https://doi.org/10.1061/(ASCE)AS.1943-5525.0000999
  5. Strain sensing skin-like film using zinc oxide nanostructures grown on PDMS and reduced graphene oxide vol.4, pp.2, 2017, https://doi.org/10.12989/smm.2017.4.2.107
  6. Numerical and experimental investigation for damage detection in FRP composite plates using support vector machine algorithm vol.5, pp.2, 2016, https://doi.org/10.12989/smm.2018.5.2.243
  7. Nonlinear and Non-Stationary Detection for Measured Dynamic Signal from Bridge Structure Based on Adaptive Decomposition and Multiscale Recurrence Analysis vol.9, pp.7, 2016, https://doi.org/10.3390/app9071302
  8. EVALUATION OF THE RESPONSE CHARACTERISTICS OF PILE FOUNDATION BUILDINGS AFFECTED BY A SERIES OF EARTHQUAKES vol.84, pp.759, 2019, https://doi.org/10.3130/aijs.84.627
  9. Longitudinal Displacement Behavior and Girder End Reliability of a Jointless Steel-Truss Arch Railway Bridge during Operation vol.9, pp.11, 2016, https://doi.org/10.3390/app9112222
  10. Determination of Monitoring Parameters for Fatigue Behavior of Steel-Concrete Composite Bridge Girders with Welded Full Depth Transverse Stiffeners vol.12, pp.1, 2016, https://doi.org/10.3390/su12010283
  11. Review of Bridge Structural Health Monitoring Aided by Big Data and Artificial Intelligence: From Condition Assessment to Damage Detection vol.146, pp.5, 2016, https://doi.org/10.1061/(asce)st.1943-541x.0002535
  12. Feasibility study of a touch-enabled active sensing approach to inspecting subsea bolted connections using piezoceramic transducers vol.29, pp.8, 2020, https://doi.org/10.1088/1361-665x/ab84ba
  13. Improving Distributed Fiber-Optic Sensor Measures by Digital Image Correlation: Two-Stage Structural Health Monitoring vol.118, pp.6, 2021, https://doi.org/10.14359/51732994
  14. Real-Time Structural Monitoring of the Multi-Point Hoisting of a Long-Span Converter Station Steel Structure vol.21, pp.14, 2016, https://doi.org/10.3390/s21144737
  15. Fatigue life prediction for orthotropic steel deck details with a nonlinear accumulative damage model under pavement temperature and traffic loading vol.126, pp.None, 2021, https://doi.org/10.1016/j.engfailanal.2021.105366
  16. Identifying Modal Parameters of a Multispan Bridge Based on High-Rate GNSS-RTK Measurement Using the CEEMD-RDT Approach vol.26, pp.8, 2021, https://doi.org/10.1061/(asce)be.1943-5592.0001754
  17. A Novel Slip Sensory System for Interfacial Condition Monitoring of Steel-Concrete Composite Bridges vol.13, pp.17, 2016, https://doi.org/10.3390/rs13173377
  18. Seismic motion control of structures using an adaptive optimal model-free controller vol.27, pp.19, 2021, https://doi.org/10.1177/1077546320960579
  19. Tracking of Stiffness Variation in Structural Members Using Input Error Function Observers vol.11, pp.24, 2016, https://doi.org/10.3390/app112411857