Membrane and Water Treatment

  • 제7권2호
  • /
  • Pages.101-113
  • /
  • 2016
  • /
  • 2005-8624(pISSN)
  • /
  • 2092-7037(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Hydrophilization of hydrophobic membrane surfaces for the enhancement of water flux via adsorption of water-soluble polymers

  • Kim, Ka Young (Department of Advanced Materials and Chemical Engineering, Hannam University) ;
  • Rhim, Ji Won (Department of Advanced Materials and Chemical Engineering, Hannam University)
  • 투고 : 2015.09.03
  • 심사 : 2016.01.16
  • 발행 : 2016.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, to improve the water flux of porous hydrophobic membranes, various water-soluble polymers including neutral, cationic and anionic polymers were adsorbed using 'salting-out' method. The adsorbed hydrophobic membrane surfaces were characterized mainly via the measurements of contact angles and scanning electron microscopy (SEM) images. To enhance the durability of the modified membranes, the water-soluble polymers such poly(vinyl alcohol) (PVA) were crosslinked with glutaraldehyde (GA) and found to be resistant for more than 2 months in vigorously stirred water. The water flux was much more increased when the ionic polymers used as the coating materials rather than the neutral polymer and in this case, about 70% of $0.31L/m^2{\cdot}h$ (LMH) to 0.50 LMH was increased when 300 mg/L of polyacrylamide (PAAm) was used as the coating agents. Among the cationic coating polymers such as poly(styrene sulfonic acid-co-maleic acid) (PSSA_MA), poly(acrylic acid-comaleic acid) (PAM) and poly(acrylic acid) (PAA), PSSA_MA was found to be the best in terms of contact angle and water flux. In the case of PSSA_MA, the water flux was enhanced about 80%. The low concentration of the coating solution was better to hydrophilize while the high concentration inclined to block the pores on the membrane surfaces. The best coating condition was found: (1) coating concentration 150 to 300 mg/L, (2) ionic strength 0.15, (3) coating time 20 min.

키워드

과제정보

연구 과제 주관 기관 : Ministry of Environment

참고문헌

  1. Akhtar, S., Hawes, C., Dudley, L., Reed, I. and Stratford, P. (1995), "Coatings reduce the fouling of microfiltration membranes", J. Memb. Sci., 107(3), 209-218. https://doi.org/10.1016/0376-7388(95)00118-9
  2. Bacheer, C., Suresh, V., Renu, R. and Lee, H.K. (2004), "Development and application of polymer-coated hollow fiber membrane micro extraction to the determination of organochlorine pesticides in water", J. Chromatogr. A, 1033(2), 213-220. https://doi.org/10.1016/j.chroma.2004.01.050
  3. Barette, D.A., Hartshorne, M.S., Hussain, M.A., Shaw, P.N. and Davies, M.C. (2001), "Resistance to nonspecific protein adsorption by poly(vinyl alcohol) thin films adsorbed to a poly(styrene) support matrix studied using surface plasmon resonance", Anal. Chem., 73(21), 5232-5239. https://doi.org/10.1021/ac010368u
  4. Belfer, S., Gilron, J., Purinson, Y., Fainshtain, R., Daltrophe, N., Priel, M., Tenzer, B. and Toma, A. (2001), "Effect of surface modification in preventing fouling of commercial SWRO membranes at the Eilat seawater desalination pilot plant", Desalination, 139(1-3), 169-176. https://doi.org/10.1016/S0011-9164(01)00307-1
  5. Cheong, S.I., Kim, B.A., Lee, H.M. and Rhim, J.W. (2013), "Physical adsorption of water-soluble polymers on hydrophobic polymeric membrane surfaces via salting-out effect", Macromol. Res., 21(6), 629-635. https://doi.org/10.1007/s13233-013-1075-9
  6. Choi, E.Y., Bae, B. and Moon, S.H. (2007), "Control of the fixed charge distribution in an ion exchange membrane via diffusion and the reaction rate of the monomer", J. Phys.Chem. B, 111(23), 6383-6390.
  7. Coupe, B. and Chen, W. (2001), "A new approach to surface functionalization of fluoropolymers", Macromolecules, 34(6), 1533-1535. https://doi.org/10.1021/ma001685q
  8. Gancarz, I., Poźniak, G., Bryjak, M. (2000), "Modification of polysulfone membranes: 3. Effect of nitrogen plasma", Eur. Polym. J., 36(8), 1563-1569. https://doi.org/10.1016/S0014-3057(99)00240-2
  9. Gholap, S.G., Badiger, M.V. and Gopinath, C.S. (2005), "Molecular origins of wettability of hydrophobic poly(vinylidene fluoride) microporous membranes on poly(vinyl alcohol) adsorption: Surface and interface analysis by XPS", J. Phys. Chem. B, 109(29), 13941-13947. https://doi.org/10.1021/jp050806r
  10. Hey, M.J., Jackson, D.P. and Yan, H. (2005), "The salting-out effect and phase separation in aqueous solutions of electrolytes and poly(ethylene glycol)", Polymer, 46(8), 2567-2572. https://doi.org/10.1016/j.polymer.2005.02.019
  11. Hvid, K.B., Nielsen, P.S. and Stengaard, F.F. (1990), "Preparation and characterization of a new ultrafiltration membrane", J. Memb.Sci., 53(3), 189-202. https://doi.org/10.1016/0376-7388(90)80014-D
  12. Hyder, M.N. (2008), "Preparation, characterization, and performance of poly(vinyl alcohol) based membranes for pervaporation dehydration of alcohols", Ph.D. Dissertation; University of Waterloo, ON, Canada.
  13. Kang, P.K. and Shah, D.O. (1997), "Filtration of nanoparticles with dimethyldioctadecylammonium bromide treated microporous polypropylene filters", Langmuir, 13(6), 1820-1826. https://doi.org/10.1021/la961010+
  14. Kang, J.S., Shim, J.K., Huh, H. and Lee, Y.M. (2001), "Colloidal adsorption of bovine serum albumin on porous polypropylene-g-poly (2-hydroxyethyl methacrylate) membrane", Langmuir, 17(14), 4352-4359. https://doi.org/10.1021/la001310y
  15. Kang, S.Y., Kim, J.S., Cho, E.H. and Rhim, J.W. (2014), "Effects of cross-linking agents on the acetic acid dehydration behaviors of PVA-PAN composite hollow fiber membranes", Membr. J., 24(4), 311-316. https://doi.org/10.14579/MEMBRANE_JOURNAL.2014.24.4.311
  16. Kim, K.S., Lee, K.H., Cho, K. and Park, C.E. (2002), "Surface modification of polysulfone ultrafiltration membrane by oxygen plasma treatment", J. Memb. Sci., 199(1-2), 135-145. https://doi.org/10.1016/S0376-7388(01)00686-X
  17. Kim, B.A., Lee, H.M, Lee, B.S., Kim, S.P., Cheong, S.I. and Rhim, J.W. (2011), "Enhancement of membrane performance through surface hydrophilization of hydrophobic porous flat-sheet membranes", Polym. Korea, 35(5), 438-443.
  18. Kou, R.Q., Xu, Z.K., Deng, H.T., Liu, Z.M., Seta, P. and Xu, Y.Y. (2003), "Surface modification ofmicroporous polypropylene membranes by plasma-induced graft polymerizationof alpha-allyl glucoside", Langmuir, 19(17), 6869-6875. https://doi.org/10.1021/la0345486
  19. Kozlov, M., Quarmyne, M., Chen, W. and McCarthy, T.J. (2003), "Adsorption of poly(vinyl alcohol) onto hydrophobic substrates. A general approach for hydrophilizing and chemically activating surfaces", Macromolecules, 36(16), 6054-6059. https://doi.org/10.1021/ma021681g
  20. Lee, S.H., Yeom, C.K. and Lee, J.M. (1999), "Effect of the interaction between permeant/permeant or permeant/membrane in the pervaporative permeations of homogeneous series of alcohol aqueous mixture", Membr. J., 9(3), 163-169
  21. Li, N., Liu, Z. and Xu, S. (2000), "Dynamically formed poly (vinyl alcohol) ultrafiltration membranes with good anti-fouling characteristics", J. Memb. Sci., 169(1), 17-28. https://doi.org/10.1016/S0376-7388(99)00327-0
  22. Matsumoto, H., Koyama, Y. and Tanioka, A. (2003), "Interaction of proteins with weak amphoteric charged membrane surfaces: effect of pH", J. Colloid Interface Sci., 264(1), 82-88. https://doi.org/10.1016/S0021-9797(03)00417-X
  23. Molisak-Tolwinska, H., Wencel, A. and Figaszewski, Z. (1998), "The effect of hydrophilization of polypropylene membranes with alcohols on their transport properties", J. Macromol. Sci. A, 35(5), 857-865. https://doi.org/10.1080/10601329808002016
  24. Mulder, M. (1996), Basic Principles of Membrane Technology, Kluwer Academic Publishers, Dordrecht, The Netherlands.
  25. Pemberton, L. and De Jaeger, R. (1996), "Surface modification of poly(vinyl alcohol) by peroxide-initiated grafting of a poly(organophosphazene)", Chem. Mater., 8(7), 1391-1395. https://doi.org/10.1021/cm950612w
  26. Semenova, S.I., Ohya, H. and Soontarapa, K. (1997), "Hydrophilic membranes for pervaporation: An analytical review", Desalination, 110(3), 251-286. https://doi.org/10.1016/S0011-9164(97)00103-3
  27. Serizawa, T., Yamamoto, K. and Akashi, M. (1999), "A novel fabrication of ultrathin poly(vinylamine) films with a molecularly smooth surface", Langmuir, 15(13), 4682-4684. https://doi.org/10.1021/la9816398
  28. Serizawa, T., Kamimura, S., Kawanishi, N. and Akashi, M. (2002), "Layer-by-layer assembly of poly(vinyl alcohol) andhydrophobic polymers based on their physicaladsorption on surfaces", Langmuir, 18(22), 8381-8385. https://doi.org/10.1021/la0204491
  29. Stengaard, F.F. (1988), "Characterization and performance of new types of ultrafiltration membranes with chemically modified surfaces", Desalination, 70(1-3), 207-224. https://doi.org/10.1016/0011-9164(88)85055-0
  30. Wavhal, D.S. and Fisher, E.R. (2003), "Membrane surface modification by plasma-induced polymerization of acrylamide for improved surface properties and reduced protein fouling", Langmuir, 19(1), 79-85. https://doi.org/10.1021/la020653o
  31. Yang, Y.F., Wan, L.S. and Xu, Z.K. (2009), "Surface hydrophilization of microporous polypropylene membrane by the interfacial crosslinking of polyethylenimine", J. Memb. Sci., 337(1-2), 70-80. https://doi.org/10.1016/j.memsci.2009.03.023
  32. Zhang, C.H., Yang, F.L., Wang, W.J. and Chen, B. (2008), "Preparation and characterization of hydrophilic modification of polypropylene non-woven fabric by dip-coating PVA (polyvinyl alcohol)", Sep. Purif. Technol., 61(3), 276-286. https://doi.org/10.1016/j.seppur.2007.10.019