설비공학논문집 (Korean Journal of Air-Conditioning and Refrigeration Engineering)

  • 제28권12호
  • /
  • Pages.502-508
  • /
  • 2016
  • /
  • 1229-6422(pISSN)
  • /
  • 2465-7611(eISSN)
대한설비공학회 (The Society of Air-Conditioning and Refrigerating Engineers of Korea)
권호 표지
DOI QR코드

DOI QR Code

가변속 압축기를 갖는 오일쿨러의 최적 PI 제어기 설계

Optimization of a PI Controller Design for an Oil Cooler System with a Variable Rotating Speed Compressor

  • 권태은 (부경대학교 대학원 냉동공조공학과) ;
  • 정태영 (부경대학교 실습선) ;
  • 정석권 (부경대학교 냉동공조공학과)
  • Kwon, Taeeun (Graduate School of Refrigeration and Air Conditioning Engineering, Pukyong National University(PKNU)) ;
  • Jeong, Taeyoung (Training Ship, Pukyong National University(PKNU)) ;
  • Jeong, Seokkwon (Department of Refrigeration and Air Conditioning Engineering, Pukyong National University(PKNU))
  • 투고 : 2016.08.01
  • 심사 : 2016.10.20
  • 발행 : 2016.12.10
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

An optimized PI controller design method is presented to promote the control performance of an oil cooler system for high precision machine tools. First, a transfer function model of the oil cooler system with a variable rotating speed compressor was obtained by the perturbation method as the first order system with a negligible dead time. Then, the closed-loop control system was described as the second order system with a zero. Its dynamic behaviors are mostly governed by characteristic parameters, the damping ratio, and the natural frequency which is incorporated in PI gains. Next, an optimum integral of the time-weighted absolute error (ITAE) criterion was applied to the second order system. The characteristic parameters can be determined by the given design specifications, percent overshoots and settling times and comparisons with the ITAE criterion. Hence, the PI gains were plainly identified in a deterministic way. Finally, the PI gains were fine-tuned to obtain desirable dynamics in real systems, considering the zero effect and parameter variations. The validity of the proposed method was proven by computer simulations and real experiments for selected cases.

키워드

참고문헌

  1. Jung, Y. M., Jeong, S. K., and Yang, J. H., 2014, PI controller design of the refrigeration system based on dynamic characteristic of the second order model, Journal of the Korean Society for Power System Engineering, Vol. 18, No. 6, pp. 200-206. https://doi.org/10.9726/kspse.2014.18.6.200
  2. Jeong, S. K. and Hong, K. H., 2013, Optimal PI controller design for refrigeration system considering disturbance, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 25, No. 2, pp. 85-93. https://doi.org/10.6110/KJACR.2013.25.2.085
  3. Jeong, S. K., Lee, D. B., and Yoon, J. I., 2012, Comparison of system performances of hot-gas bypass and compressor variable speed control of water coolers for machine tools, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 24, No. 1, pp. 1-8. https://doi.org/10.6110/KJACR.2012.24.1.001
  4. Shin, Y. G., Yang, H. C., Tae, C. S., Jang, C. Y., Cho, S., and Kim, Y. K., 2005, A study on PID tuning technique of a thermal environment chamber, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 17, No. 11, pp. 1072-1079.
  5. Kim, S. C., Hong, D. S., and Chung, W. J., 2004, Temperature control for an oil cooler system using PID control with fuzzy logic, Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 13, No. 4, pp. 87-94.
  6. Byun, J. Y. and Jeong, S. K., 2010, Design of PI and feedforward controller for precise temperature control of oil cooler system, Journal of the Korean Society for Power System Engineering, Vol. 14, No. 6, pp. 89-95.
  7. Lee, D. B., Jeong, S. K., and Jung, Y. M., 2014, State equation modeling and the optimum control of a variable-speed refrigeration system, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 26, No. 12, pp. 579-587. https://doi.org/10.6110/KJACR.2014.26.12.579
  8. Zheng, F. and Wang, Q. G., 2001, Robust PI controller design for nonlinear systems via fuzzy modeling approach, IEEE Trans. on Systems, Mans and Cybernetics, Vol. 31, No. 2, pp. 666-675. https://doi.org/10.1109/3468.983422
  9. Li, H. and Jeong, S. K., 2006, An empirical model for decoupling control of a variable speed refrigeration system, Journal of the Korean Society for Power System Engineering, Vol. 10, No. 3, pp. 81-87.
  10. Dort, R. C. and Bishop, R. H., 1993, Modern Control Systems, pp. 176-185, 578-583.
  11. Schurt, L. C., Hermes, C. J. L., and Neto, A. T., 2010, Assessment of the controlling envelope of a modelbased multivariable controller for vapour compression refrigeration systems, Applied Thermal Engineering, Vol. 30, No. 13, pp. 1538-1546. https://doi.org/10.1016/j.applthermaleng.2010.02.024
  12. Ekren, O., Sahin, S., and Isler, Y., 2010, Comparison of different controllers for variable speed compressor and electronic expansion valve, International Journal of Refrigeration, Vol. 33, No. 6, pp. 1161-1168. https://doi.org/10.1016/j.ijrefrig.2010.05.005