에너지공학 (Journal of Energy Engineering)

  • 제25권4호
  • /
  • Pages.7-12
  • /
  • 2016
  • /
  • 1598-7981(pISSN)
  • /
  • 2713-7074(eISSN)
한국에너지학회 (The Korean Society for Energy)
권호 표지
DOI QR코드

DOI QR Code

배출가스 냉각장치 형상설계를 위한 수치해석

Numerical Study for Configuration Design in the Exhaust Gas Cooling System

  • Lee, Suk Young (Department of Mechanical Engineering, Inha Technical College)
  • 투고 : 2016.08.23
  • 심사 : 2016.10.25
  • 발행 : 2016.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구는 냉각효과를 높이기 위해 냉각채널 형상에 대한 변수를 다루고 있다. 냉각효과가 증가하면 제조현장에 있는 공장에 의해 발생되는 배출가스량은 감소하게 된다. 이러한 문제를 해결하기 위해 효율적인 냉각시스템에 대한 설계가 필요하다. 따라서, 본 연구에서는 냉각채널을 냉각성능을 향상시키기 위해 수치분석을 수행하였다. 배플과 핀의 길이에 영향을 받는 열전달률은 수치해석에 의해 계산이 된다. 3차원 레이놀즈 평균 나비아스토크 방정식이 유동과 냉각채녈의 열전달을 계산하는데 사용되며 난류영역은 $k-{\varepsilon}$ 모델이 사용되었다.

This paper deals with a parametric study on cooling channel configurations to enhance the cooling effect. As a cooling effect has been increased, the exhaust gas by the plant from a manufacture is becoming deceased. To solve this problem, the design of a efficient cooling system is needed. In this paper, the cooling channel was analyzed to improve the cooling performance. The heat transfer rates depending on the number of baffle and the heiht of fin were obtained by using numerical simulation method. Three-dimensional Reynolds-averaged Naiver-Stokes equations were used to estimate flow and heat transfer in cooling channel, and the $k-{\varepsilon}$ model for turbulence closure was employed.

키워드

참고문헌

  1. Hwang, S. D., Kwon, H. G. and Cho, H. H., 2008, Heat transfer with dimple/protrusion arrays in a rectangular duct with a low Reynolds number range, International Journal of Heat and Fluid Flow, Vol. 29, pp. 916-926 https://doi.org/10.1016/j.ijheatfluidflow.2008.01.004
  2. Mahmood, G. I. and Ligrani, P. M., 2002, Heat transfer in a dimpled channel: combined influences of aspect ratio, temperature ratio, Reynolds number, and flow structure, International Journal of Heat and Mass Transfer, Vol. 45, pp. 2011-2020 https://doi.org/10.1016/S0017-9310(01)00314-3
  3. Ligrani, P. M., et al., 2001, Flow structure and local Nusset number variations in a channel with dimples and protrusion on opposite walls, International Journal of Heat and Mass Transfer, Vol. 44, pp. 4413-4425 https://doi.org/10.1016/S0017-9310(01)00101-6
  4. Elyyan, M. A., Rozati, A. and Tafti, D. K., 2008, Investigation of dimpled fins for heat transfer enhancement in compact heat exchangers, International Journal of Heat and Mass Transfer, Vol. 51, pp. 2950-2966 https://doi.org/10.1016/j.ijheatmasstransfer.2007.09.013
  5. Isaev, S. A. and Leont, A. I., 2003, Numerical simulation of vortex enhancement of heat transfer under conditions of turbulent flow past a spherical dimple on the wall of a narrow channel, High Temperature, Vol. 44, pp. 665-679
  6. Samad, A., Lee, K. D. and Kim, K. Y., 2008, Multiobjective optimization of a dimpled channel for heat transfer augmentation, Heat Mass Transfer, Vol. 45, pp. 207-217 https://doi.org/10.1007/s00231-008-0420-6
  7. Kim, H. M., Moon, M. A. and Kim, K. Y., 2012, Heat-transfer anaysis of a cooling channel with inclined elliptical dimlles, Journal of Computational Fluids Engineering Vol. 17, No. 3, pp.1-7 https://doi.org/10.6112/kscfe.2012.17.3.001