한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제25권1호
  • /
  • Pages.89-95
  • /
  • 2016
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

사판식 피스톤 펌프의 밸브 플레이트 설계와 예압에 따른 맥동

Pulsation According to Pre-Compression Sections and Valve Plate Design for a Swash Plate Type Piston Pump

  • Sa, Jin-Woong (Department of Mechanical Design Engineering, Changwon National University) ;
  • Chung, Won-Jee (Department of Mechanical Design Engineering, Changwon National University) ;
  • Bae, Jun-Hyeong (Department of Mechanical Design Engineering, Changwon National University) ;
  • Lee, Jeong-Min (Flutek, Ltd.)
  • 투고 : 2015.10.28
  • 심사 : 2016.02.01
  • 발행 : 2016.02.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study investigated the design factors of the opening area in order to consider the kinematic stability of a valve plate, conducting an analysis of the reduction effects of pressure pulsation and flow ripple depending on the design factors, using the $SimulationX^{(R)}$ (Germany) hydraulic analysis program. Further, we performed a structure analysis to confirm the kinematic stability of the valve plate in a swash plate type piston pump, and analyzed the effects of pulsation on a 1-step V-type notch, 2-step V-type notch, and 2-step U-type notch to determine the effects of pulsation reduction. Finally, we show the effectiveness of our proposed design of the pre-compression sections on a valve plate in terms of low pulsation by using the hydraulic analysis program, $SimulationX^{(R)}$.

키워드

참고문헌

  1. Kim, J. G., 2003, Performance Characteristics with Valve Plate Shapes in Swash Plate Type Oil Piston Pumps, A Thesis for a Doctorate, Chonbuk National University, Republic of Korea.
  2. Yoon, Y. H., Jang, J. S., Lee, Y. B., 2012, An Analysis of Dynamic Characteristics for Variable Swash Plate Type Axial Piston Pump, Proceedings of the Conference on Korea Society for Fluid Power and Construction Equipments, 23-30.
  3. Jang, J. H., Chung, W. J., 2013, Application of Simulation X Based Simulation Technique to Notch Shape Optimization for a Variable Swash Plate Type Piston Pump, Proceedings of the International Conference on Scientific Computing, 137-142.
  4. Lee, I. Y., 2012, Hydraulic Engineering, Munundang, Republic of Korea.
  5. Jang, D. H., Lee, S. G., Kwon, J. H., Park, S. H., 2009, A Study on Pressure, Flow Fluctuation and Noise in the Cylinder of Swash Plate Type Axial Piston Pump, Transactions of the Korea Fluid Power Systems Society, 6:3 1-9.
  6. Yoon, Y. H., Jang, J. S., 2012, Simulation X, Multi-domain Simulation and Modeling Tool for the Design, Analysis, and Optimization of Complex systems, Transactions of the Korea Fluid Power Systems Society, 9:1 56-69.
  7. Choi, S. L., Jang, J. S., 2013, Shape Design Sensitivity Analysis of the Valves Installed in the Hydraulic Driving Motor, Journal of the Korea Society for Simulation, 22:3 81-87. https://doi.org/10.9709/JKSS.2013.22.3.081
  8. Jung, C. D., Chung, W. J., 2012, Application of Solid $Works^{(R)}$, and Lab $View^{(R)}$-based Simulation Technique to Gain Tuning of a 6-axis Articulated Robot, Proceedings of the International Conference on Scientific Computing, 132-138