Advances in concrete construction

  • 제4권2호
  • /
  • Pages.107-121
  • /
  • 2016
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

The effect of attack of chloride and sulphate on ground granulated blast furnace slag concrete

  • Ashish, Deepankar K. (Department of Civil Engineering, PEC University of Technology) ;
  • Singh, Bhupinder (Department of Civil Engineering, Indo Global College of Engineering) ;
  • Verma, Surender K. (Department of Civil Engineering, PEC University of Technology)
  • 투고 : 2016.07.15
  • 심사 : 2016.11.02
  • 발행 : 2016.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

This concrete is one of the most versatile construction material widely used for almost a century now. It was considered to be very durable material and required a little or no maintenance since long time. The assumption is very true, except when it is subjected to highly aggressive environments. The deterioration of concrete structures day by day due to aggressive environment is compelling engineers to assess the loss in advance so that proper preventive measure can be taken to achieve required durability to concrete structures. The compounds present in cement concrete are attacked by many salt solutions and acids. These chemicals are encountered by almost all concrete structures. The present study has been undertaken to investigate the effect of attack of chlorides and sulphates with varying severity on compressive strength of ground granulated blast furnace slag (GGBFS) concrete after immersion in salt solution for 28 days. The results indicate that the durability of GGBFS concrete increases with the increase in percentage replacement of cement by GGBFS for 20% and then gradually decreases with increases in percentage of GGBFS with cement (as in the study for 40% and 60%). Also there is increase in strength of GGBFS concrete with increase in age. Thus the durability of concrete improves when GGBFS is added as partial replacement of cement. In this study the strength of GGBFS concrete is less affected by chemicals as compared to conventional concrete when exposed to aggressive environment.

키워드

참고문헌

  1. ACI Committee 233R (1995), "Ground granulated blast-furnace slag as a cementitious constituent in concrete", American Concrete Institute, Farmington Hills, Mich.
  2. Ashish, D.K., Singh, B. and Singla, S. (2011), "Properties of fly ash bricks", Proceedings of National Conference on Emerging Trends in Civil Engineering (ETCE-2011), E-Max Group of Institutions, August, Haryana, India.
  3. Ashish, D.K., Verma, S.K., Kumar, R. and Sharma, N. (2016), "Properties of concrete incorporating waste marble powder as partial substitute of cement and sand", Proceeding of The 2016 World Congress on The 2016 Structures Congress (Strectures16), August 28- September 1, Jeju Island, Korea.
  4. Basheer, P.A.M., Gilleece, P.R. and Long, A.E. and Mc-Carter, W.J. (2002), "Monitoring electrical resistance of concretes containing alternative cementitious materials to assess their resistance to chloride penetration", Cement Concrete Compos., 24(5), 437-449. https://doi.org/10.1016/S0958-9465(01)00075-0
  5. Bauchkar, S.D. and Chore, H.S. (2014), "Rheological properties of self consolidating concrete with various mineral admixtures", Struct. Eng. Mech., 51(1), 1-13. https://doi.org/10.12989/sem.2014.51.1.001
  6. Bleszynski, R., Hooton, R.D., Thomas, M.D.A. and Rogers, C.A. (2002), "Durability of Ternary Blend Concrete with Silica Fume and Blast-Furnace Slag: Laboratory and Outdoor Exposure Site Studies", ACI Mater. J., 99(5), 499-508.
  7. Bohac, M. and Gregerova, M. (2009), "The influence of blast-furnace slag hydration products on microcracking of concrete", Mater. Characterization, 60(7), 729-734. https://doi.org/10.1016/j.matchar.2008.11.011
  8. Bush, T.D., Russell, B.W., Zaman, M.M., Hale, M.W. and Ling, T.A. (2000), "Improving concrete performance through the use of Blast Furnace Slag", Final Rpt, FHWA-OK 00(01), Oklahoma Dept. of Transportation, August, 133.
  9. Chore, H.S. and Joshi, M.P. (2015), "Strength evaluation of concrete with fly ash and ggbfs as cement replacing materials", Adv. Concrete Constr., 3(3), 223-236. https://doi.org/10.12989/acc.2015.3.3.223
  10. Dar, A.R., Verma, S.K., Ashish, D.K. and Dar, M.A. (2015), Investigation on the properties of non conventional bricks", J. Struct. Eng., 3(4), 26-35.
  11. Darquennes, A., Olivier, K., Benboudjema, F. and R. Gagne (2016), "Self-healing at early-age, a way to improve the chloride resistance of blast-furnace slag cementitious materials", Constr. Build. Mater., 113(15), 1017-1028. https://doi.org/10.1016/j.conbuildmat.2016.03.087
  12. Dehghanian, C. and Arjemandi, M. (1997), "Influence of slag blended cement concrete on chloride diffusion rate", Cement Concrete Res., 27(6), 937-945. https://doi.org/10.1016/S0008-8846(97)00064-1
  13. Detwiler, R.J., Fapohunda, C.A. and Natale, J. (1994), "Use of supplementary cementing materials to increase the resistance to chloride ion penetration of concrete cured at elevated temperatures", ACI Mater. J., 91(1), 63-66.
  14. Dhir, R.K., El-Mohr, M.A.K. and Dyer, T.D. (1996), "Chloride binding in GGBS concrete", Cement Concrete Res., 26(12), 1767-1773 . https://doi.org/10.1016/S0008-8846(96)00180-9
  15. Duos, C. and Eggers, J. (1999), "Evaluation of ground granulated Blast Furnace Slag in concrete (Grade 120)", Rpt. No. FHWA/LA-99/336, Louisiana Trans. Res. Center, Baton Rouge, Louisiana, October.
  16. Hooton, R.D. and Emery, J.J. (1983), "Glass content determination and strength development predictions for vitrified Blast Furnace Slag", American Concrete Institute, SP-79, V. M. Malhotra ed., Farmington Hills, Mich.
  17. Jau, W.C. and Tsay, D.S. (1998), "A study of the basic engineering properties of slag cement concrete and its resistance to seawater corrosion", Cement Concrete Res., 28(10), 1363-371. https://doi.org/10.1016/S0008-8846(98)00117-3
  18. Kavali, O., Khan, M.S.H. and Ahmed, M.S. (2012), "The role of hydrotalcite in chloride binding and corrosion protection in concretes with ground granulated blast furnace slag", Cement Concrete Compos., 34(8), 936-945. https://doi.org/10.1016/j.cemconcomp.2012.04.009
  19. Konsta-Gdoutos, M.S. and Shah, S.P. (2003), "Hydration and properties of novel blended cements based on cement kiln dust and blast furnace slag", Cement Concrete Res., 33(8), 1269-1276. https://doi.org/10.1016/S0008-8846(03)00061-9
  20. Kumar, R., Ashish, D.K. and Najia, L. (2015), "Properties of non conventional (fly ash) brick: an experimental study", Int. J. Eng. Trends Tech., 24(4), 198-204. https://doi.org/10.14445/22315381/IJETT-V24P237
  21. Leng, F.G., Feng, N.Q. and Lu, X.Y. (2000), "An experimental study on the properties of resistance to diffusion of chloride ions of fly ash and blast furnace slag concrete", Cement Concrete Res., 30(6), 989-992. https://doi.org/10.1016/S0008-8846(00)00250-7
  22. Luo, R., Cai, Y. and Wang, C. and Huang, X. (2003), "Study of chloride binding and diffusion in GGBS concrete", Cement Concrete Res., 33(1), 1-7. https://doi.org/10.1016/S0008-8846(02)00712-3
  23. Metso, J. and Kajaus, E. (1983), "Activation of Blast Furnace Slag by Some Inorganic Materials," Fly Ash, Silica Fume, Slag, and Other Mineral By-Products in Concrete, American Concrete Institute, SP-79, V. M. Malhotra ed., Farmington Hills, Mich.
  24. Millard, S. and Beattie, G. (2015), "Technical and economical feasibility of using ggbs in long-span concrete structures", Adv. Concrete Constr., 3(1), 1-14. https://doi.org/10.12989/acc.2015.3.1.001
  25. MoDOT Job Special Provision L, Job No. JOU0321G.
  26. Poupard, O., Ait-Mokhtar, A. and Dumargue, P. (2004), "Corrosion by chlorides in reinforced concrete: Determination of chloride concentration threshold by impedance spectroscopy", Cement Concrete Res., 34(6), 991-1000. https://doi.org/10.1016/j.cemconres.2003.11.009
  27. Ramakrishnan, V. and Akman, M.S. (1992), Proceedings of the US-Turkey Workshop, Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Istanbul, Turkey, May.
  28. Ramezanianpour, A.A., Radaei, A.K.E., Jafari, H.A. and Moghaddam, M.A. (2014), "Influence of Iranian low-reactivity ggbfs on the properties of mortars and concretes by taguchi method", Comput. Concrete, 13(4), 423-436. https://doi.org/10.12989/cac.2014.13.4.423
  29. Regourd, M. (1980), "Structure and behavior of Slag Portland cement hydrates", Proceedings of the Seventh International Congress on the Chemistry of Cement, 1, Paris, September.
  30. Song, H.W. and Saraswathy, V. (2006), "Studies on the corrosion resistance of reinforced steel in concrete with ground granulated blast-furnace slag - An overview", J. Hazard. Mater., 138(2), 226-233. https://doi.org/10.1016/j.jhazmat.2006.07.022
  31. Verma, S.K. and Ashish, D.K. (2014), "Experimental study on Rubber-Tyre as replecement of coarse aggregate in cement concrete", National Conference on Sustainable Infrastructure Development (NCSID), NITTTR Chandigarh, India, March.
  32. Wani, S.F., Ashish, D.K., Dar, M.A. and Kumar, R. (2015), "Study on mix design & hardened properties of self-compacting concrete", Int. J. Civil, Struct., Envir. Infrastruct. Eng. Res. Develop., 5(4), 1-10.
  33. Yang, T., Yao, X. and Zhang, Z. (2014), "Quantification of chloride diffusion in fly ash-slag-based geopolymers by X-ray fluorescence (XRF)", Constr. Build. Mater., 69, 109-115. https://doi.org/10.1016/j.conbuildmat.2014.07.031
  34. Zhang, W.M and Ba, H.J. (2012), "Effect of ground granulated blast-furnace slag (GGBFS) and silica fume (SF) on chloride migration through concrete subjected to repeated loading", Sci. China Tech. Sci., 55(11), 3102-3108. https://doi.org/10.1007/s11431-012-5027-y

피인용 문헌

  1. Durability of self compacted concrete containing slag in hot climate vol.5, pp.3, 2017, https://doi.org/10.12989/acc.2017.5.3.271
  2. Performance of self-compacting concrete made with coarse and fine recycled concrete aggregates and ground granulated blast-furnace slag vol.6, pp.2, 2016, https://doi.org/10.12989/acc.2018.6.2.103
  3. Copper or ferrous slag as substitutes for fine aggregates in concrete vol.6, pp.5, 2016, https://doi.org/10.12989/acc.2018.6.5.545
  4. Potential valorisation of ferrous slag in the treatment of water and wastewater: A review vol.8, pp.1, 2016, https://doi.org/10.12989/aer.2019.8.1.055
  5. Numerical analysis of concrete degradation due to chloride-induced steel corrosion vol.7, pp.4, 2016, https://doi.org/10.12989/acc.2019.7.4.203
  6. Experimental investigations on performance of concrete incorporating Precious Slag Balls (PS Balls) as fine aggregates vol.8, pp.3, 2016, https://doi.org/10.12989/acc.2019.8.3.239
  7. Properties of Blast-Furnace Slag Cement Concrete Subjected to Accelerated Curing vol.4, pp.4, 2016, https://doi.org/10.3390/infrastructures4040069
  8. Durability assessments of limestone mortars containing polypropylene fibres waste vol.10, pp.2, 2016, https://doi.org/10.12989/acc.2020.10.2.171
  9. 41 Year Long-Term Durability of High Volume Blast-Furnace Slag Cement Concrete vol.19, pp.3, 2016, https://doi.org/10.3151/jact.19.248
  10. Improvement of Bond Strength and Durability of Recycled Aggregate Concrete Incorporating High Volume Blast Furnace Slag vol.14, pp.13, 2016, https://doi.org/10.3390/ma14133708
  11. A review of concrete durability in marine environment vol.1175, pp.1, 2016, https://doi.org/10.1088/1757-899x/1175/1/012018
  12. Investigation on compression properties of seawater-sea sand concrete vol.12, pp.2, 2016, https://doi.org/10.12989/acc.2021.12.2.093
  13. Lime-activation of natural pozzolan for use as supplementary cementitious material in concrete vol.13, pp.3, 2016, https://doi.org/10.1016/j.asej.2021.09.029