Advances in concrete construction

  • 제4권4호
  • /
  • Pages.263-281
  • /
  • 2016
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Performance studies on concrete with recycled coarse aggregates

  • Yaragal, Subhash C. (Department of Civil Engineering, National Institute of Technology) ;
  • Teja, Dumpati C. (Department of Civil Engineering, National Institute of Technology) ;
  • Shaffi, Mohammed (Department of Civil Engineering, National Institute of Technology)
  • 투고 : 2016.11.19
  • 심사 : 2017.01.13
  • 발행 : 2016.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

Concrete continues to be the most consumed construction material in the world, only next to water. Due to rapid increase in construction activities, Construction and Demolition (C&D) waste constitutes a major portion of total solid waste production in the world. It is important to assess the amount of C&D waste being generated and analyse the practices needed to handle this waste from the point of waste utilization, management and disposal addressing the sustainability aspects. The depleting natural resources in the current scenario warrants research to examine viable alternative means, modes and methods for sustainable construction. This study reports processing Recycled Coarse Aggregates (RCA) using a rod mill, for the first time. Parameters such as amount of C&D waste for processing, nature of charge and duration of processing time have been optimized for obtaining good quality RCA. Performance of RCA based concrete and performance enhancement techniques of 50% RCA based concrete are discussed in this paper.

키워드

참고문헌

  1. Barbudo, A., DeBrito, J., Evangelista, L., Bravo, M. and Agrela, F. (2013), "Influence of water-reducing admixtures on the mechanical performance of recycled concrete", J. Clean. Prod., 59, 93-98. https://doi.org/10.1016/j.jclepro.2013.06.022
  2. Behera, M., Bhattacharyya, S.K., Minocha, A.K., Deoliya, R. and Maiti, S. (2014), "Recycled aggregate from C&D waste and its use in concrete-a breakthrough towards sustainability in construction sector: A review", Constr. Build. Mater., 68, 501-516. https://doi.org/10.1016/j.conbuildmat.2014.07.003
  3. Belin, P., Habert, G., Thiery, M. and Roussel, N. (2014), "Cement paste content and water absorption of recycled concrete coarse aggregates", Mater. Struct., 47(9), 1451-1465. https://doi.org/10.1617/s11527-013-0128-z
  4. Beltran, M.G., Barbudo, A., Agrela, F., Galvin, A.P. and Jimenez, J.R. (2014), "Effect of cement addition on the properties of recycled concretes to reach control concretes strengths", J. Clean. Prod., 79, 124-133. https://doi.org/10.1016/j.jclepro.2014.05.053
  5. Chandra, S. (2004), "Implications of using recycled construction demolition waste as aggregate in concrete", Proceedings of the International Conference on Sustainable Waste Manage and Recycling: Construction Demolition Waste, Kingston University, London, U.K., September.
  6. IS-383 (1970), Specification for Coarse and Fine Aggregates from Natural Sources for Concrete, Bureau of Indian Standards, New Delhi, India.
  7. Khalaf, F.M. and DeVenny, A.S. (2004), "Recycling of demolished masonry rubble as coarse aggregate in concrete: Review", J. Mater. Civil Eng., 16(4), 331-340. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:4(331)
  8. Kou, S.C. and Poon, C.S. (2012), "Enhancing the durability properties of concrete prepared with coarse recycled aggregate", Constr. Build. Mater., 35, 69-76. https://doi.org/10.1016/j.conbuildmat.2012.02.032
  9. Kou, S.C. and Poon, C.S. (2013), "Long-term mechanical and durability properties of recycled aggregate concrete prepared with the incorporation of fly ash", Cement Concrete Compos., 37, 12-19. https://doi.org/10.1016/j.cemconcomp.2012.12.011
  10. Kou, S.C., Poon, C.S. and Wan, H.W. (2012), "Properties of concrete prepared with low-grade recycled aggregates", Constr. Build. Mater., 36, 881-889. https://doi.org/10.1016/j.conbuildmat.2012.06.060
  11. Kwan, W.H., Ramli, M., Kam, K.J. and Sulieman, M.Z. (2012), "Influence of the amount of recycled coarse aggregate in concrete design and durability properties", Constr. Build. Mater., 26(1), 565-573.
  12. Martinez-Lage, I., Martinez-Abella, F., Vazquez-Herrero, C. and Perez-Ordonez, J.L. (2012), "Properties of plain concrete made with mixed recycled coarse aggregate", Constr. Build. Mater., 37, 171-176. https://doi.org/10.1016/j.conbuildmat.2012.07.045
  13. McNeil, K. and Kang, T.H.K. (2013), "Recycled concrete aggregates: A review", J. Concrete Struct. Mater., 7(1), 61-69. https://doi.org/10.1007/s40069-013-0032-5
  14. Mukharjee, B.B. and Barai, S.V. (2015), "Characteristics of sustainable concrete incorporating recycled coarse aggregates and colloidal nano-silica", Adv. Concrete Constr., 3(3), 187-202. https://doi.org/10.12989/acc.2015.3.3.187
  15. Padmini, A.K., Ramamurthy, K. and Mathews, M.S. (2009), "Influence of parent concrete on the properties of recycled aggregate concrete", Constr. Build. Mater., 23(2), 829-836. https://doi.org/10.1016/j.conbuildmat.2008.03.006
  16. Panda, K.C. and Bal, P.K. (2013), "Properties of self-compacting concrete using recycled coarse aggregate", Proc. Eng., 51, 159-164. https://doi.org/10.1016/j.proeng.2013.01.023
  17. Prusty, R., Mukharjee, B.B. and Barai, S.V. (2015), "Nano-engineered concrete using recycled aggregates and nano-silica: Taguchi approach", Adv. Concrete Constr., 3(4), 253-268. https://doi.org/10.12989/acc.2015.3.4.253
  18. Qasrawi, H. (2014), "The use of steel slag aggregate to enhance the mechanical properties of recycled aggregate concrete and retain the environment", Constr. Build. Mater., 54, 298-304. https://doi.org/10.1016/j.conbuildmat.2013.12.063
  19. Rao, A., Jha, K.N. and Misra, S. (2007), "Use of aggregates from recycled construction and demolition waste in concrete", Res. Conserv. Rec., 50(1), 71-81. https://doi.org/10.1016/j.resconrec.2006.05.010
  20. Rao, M.C., Bhattacharyya, S.K. and Barai, S.V. (2011), "Behaviour of recycled aggregate concrete under drop weight impact load", Constr. Build. Mater., 25(1), 69-80. https://doi.org/10.1016/j.conbuildmat.2010.06.055
  21. Sagoe-Crentsil, K.K., Brown, T. and Taylor, A.H. (2001), "Performance of concrete made with commercially produced coarse recycled concrete aggregate", Cement Concrete Res., 31(5), 707-712. https://doi.org/10.1016/S0008-8846(00)00476-2
  22. Shaikh, F., Kerai, S. and Kerai, S. (2015), "Effect of micro-silica on mechanical and durability properties of high volume fly ash recycled aggregate concretes (HVFA-RAC)", Adv. Concrete Constr., 3(4), 317-331. https://doi.org/10.12989/acc.2015.3.4.317
  23. Silva, R.V., De Brito, J. and Dhir, R.K. (2014), "Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production", Constr. Build. Mater., 65, 201-217. https://doi.org/10.1016/j.conbuildmat.2014.04.117
  24. Tabsh, S.W. and Abdelfatah, A.S. (2009), "Influence of recycled concrete aggregates on strength properties of concrete", Constr. Build. Mater., 23(2), 1163-1167. https://doi.org/10.1016/j.conbuildmat.2008.06.007
  25. Wagih, A.M., El-Karmoty, H.Z., Ebid, M. and Okba, S.H. (2013), "Recycled construction and demolition concrete waste as aggregate for structural concrete", HBRC J., 9(3), 193-200. https://doi.org/10.1016/j.hbrcj.2013.08.007

피인용 문헌

  1. Usage potential of recycled aggregates in mortar and concrete vol.5, pp.3, 2016, https://doi.org/10.12989/acc.2017.5.3.201
  2. Stress-strain relationship for recycled aggregate concrete after exposure to elevated temperatures vol.19, pp.6, 2016, https://doi.org/10.12989/cac.2017.19.6.609
  3. Mechanical behavior of concrete comprising successively recycled concrete aggregates vol.5, pp.4, 2016, https://doi.org/10.12989/acc.2017.5.4.303
  4. Durability studies on concrete with partial replacement of cement and fine aggregates by fly ash and tailing material vol.5, pp.6, 2016, https://doi.org/10.12989/acc.2017.5.6.671
  5. Performance of self-compacting concrete made with coarse and fine recycled concrete aggregates and ground granulated blast-furnace slag vol.6, pp.2, 2016, https://doi.org/10.12989/acc.2018.6.2.103
  6. Optimization of ferrochrome slag as coarse aggregate in concretes vol.23, pp.6, 2016, https://doi.org/10.12989/cac.2019.23.6.421
  7. Behavior of repaired RAC beam-column joints using steel welded wire mesh jacketed with cement mortar vol.8, pp.2, 2019, https://doi.org/10.12989/acc.2019.8.2.091
  8. Rheological, physico-mechanical and durability properties of multi-recycled concrete vol.9, pp.1, 2016, https://doi.org/10.12989/acc.2020.9.1.009
  9. Sustainable self compacting acid and sulphate resistance RAC by two stage mixing approaches vol.9, pp.1, 2016, https://doi.org/10.12989/acc.2020.9.1.055
  10. Residual Properties and Axial Bearing Capacity of Steel Reinforced Recycled Aggregate Concrete Column Exposed to Elevated Temperatures vol.7, pp.None, 2016, https://doi.org/10.3389/fmats.2020.00187
  11. Effect of different binders on cold-bonded artificial lightweight aggregate properties vol.9, pp.2, 2020, https://doi.org/10.12989/acc.2020.9.2.183
  12. Reinforced fibrous recycled aggregate concrete element subjected to uniaxial tensile loading vol.9, pp.2, 2016, https://doi.org/10.12989/acc.2020.9.2.195
  13. Experimental investigation on hardened properties of recycled coarse aggregate concrete vol.10, pp.5, 2020, https://doi.org/10.12989/acc.2020.10.5.369
  14. Improvement of Bond Strength and Durability of Recycled Aggregate Concrete Incorporating High Volume Blast Furnace Slag vol.14, pp.13, 2016, https://doi.org/10.3390/ma14133708