Advances in concrete construction

  • 제4권3호
  • /
  • Pages.207-220
  • /
  • 2016
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Mechanical properties of concrete containing recycled materials

  • Solanki, Pranshoo (Department of Technology, College of Applied Science and Technology, Illinois State University) ;
  • Dash, Bharat (Department of Technology, College of Applied Science and Technology, Illinois State University)
  • 투고 : 2016.07.12
  • 심사 : 2016.12.15
  • 발행 : 2016.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

The objective of this study was to evaluate the influence of recycled materials, namely, shredded scrap tire (SST), reclaimed asphalt pavement (RAP) and class C fly ash (CFA) on compressive and tensile strength of concrete. Either SST or RAP was used as an aggregate replacement and class C fly ash (CFA) as Portland cement replacement for making concrete. A total of two types of SST and RAP, namely, chips and screenings were used for replacing coarse and fine aggregates, respectively. A total of 26 concrete mixes containing different replacement level of SST or RAP and CFA were designed. Using the mix designs, cylindrical specimens of concrete were prepared, cured in water tank, and tested for unconfined compressive strength (UCS) and indirect tensile strength (IDT) after 28 days. Experimental results showed aggregate substitution with SST decreased both UCS and IDT of concrete. On the contrary, replacement of aggregate with RAP improved UCS values. Specimens containing RAP chips resulted in concrete with higher IDT values as compared to corresponding specimens containing RAP screenings. Addition of 40% CFA was found to improve UCS values and degrade IDT values of SST containing specimens. Statistical analysis showed that IDT of SST and RAP can be estimated as approximately 13% and 12% of UCS, respectively.

키워드

과제정보

연구 과제 주관 기관 : Illinois State University

참고문헌

  1. ASTM C 114 (2015), "Standard test methods for chemical analysis of Hydraulic Cement", Annual Book of ASTM Standards, American Society for Testing and Materials, 04.02, West Conshohocken, PA.
  2. ASTM C 143 (2015), "Standard test method for Slump of Hydraulic-Cement Concrete", Annual Book of ASTM Standards, American Society for Testing and Materials, 04.02, West Conshohocken, PA.
  3. ASTM C 192 (2016), "Standard practice for making and curing concrete test specimens in the laboratory", Annual Book of ASTM Standards, American Society for Testing and Materials, 04.02, West Conshohocken, PA.
  4. ASTM C 39 (2016), "Standard test method for compressive strength of Cylindrical concrete specimens", Annual Book of ASTM Standards, American Society for Testing and Materials, 04.02, West Conshohocken, PA.
  5. ASTM C 496 (2011), "Standard test method for splitting tensile strength of Cylindrical concrete specimens", Annual Book of ASTM Standards, American Society for Testing and Materials, 04.02, West Conshohocken, PA.
  6. Bilodeau, A. and Malhotra, V.M. (2000), "High-volume fly ash system: Concrete solution for sustainable development", ACI Mater. J., 97(M6), Jan-Feb 2000.
  7. Cook, J.E. (1981), "A ready-mixed concrete company's experience with class C ash", Report No. 163, National Ready-Mix Concrete Association, Silver Spring, Maryland.
  8. Crouch, L.K., Hewitt, R. and Byard, B. (2007), "High Volume Fly Ash Concrete", Proceedings of the World of Coal Ash (WOCA), Northern Kentucky, 1-14
  9. Eldin, N.N. and Senouci, A.B. (1993), "Rubber-tire practices as concrete aggregate," J. Mater. Civil Eng., 5(4), 478-496. https://doi.org/10.1061/(ASCE)0899-1561(1993)5:4(478)
  10. Epps, J.A. (1994), "Uses of recycled rubber tires in highways", Synthesis of Highway Practice, 198, Transportation Research Board, National Research Council, Washington, DC.
  11. Gupta, S. (2015), "Use of triangular membership function for prediction of compressive strength of concrete containing nanosilica", Cogent Eng., 2:1025578, 1-11. https://doi.org/10.1080/23311916.2015.1048098
  12. Hernandez-Olivares, F., Barluenga, G., Bollati, M. and Witoszek, B. (2002), "Static and dynamic behavior of recoiled tyre rubber-filled concrete", Cement Concrete Res., 32(10), 1587-1595. https://doi.org/10.1016/S0008-8846(02)00833-5
  13. Huang, B., Shu, X. and Burdette, E.G. (2005), "Laboratory investigation of mixing hot-mix asphalt with reclaimed asphalt pavement", J. Transport. Res. Board, 1929(1), 37-45. https://doi.org/10.3141/1929-05
  14. Huang, B., Shu, X. and Burdette, E.G. (2006), "Mechanical properties of concrete containing recycled asphalt pavements", Mag. Concrete Res., 58(5), 313-320. https://doi.org/10.1680/macr.2006.58.5.313
  15. Ibrahim, A., Mahmoud, E., Khodair, Y. and Patibandla, V. (2014), "Fresh, mechanical, and durability characteristics of self-consolidating concrete incorporating recycled Asphalt pavements", J. Mater. Civil Eng., 26(4), 668-675. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000832
  16. Kennedy, T.W., Moore, R.K. and Anagnos, J.N. (1971), "Estimations of indirect-tensile strengths for cement-treated materials", Highway Res. Record, 351, 112-114.
  17. Khatib, Z.K. and Bayomy, F.M. (1999), "Rubberized Portland cement concrete", J. Mater. Civil Eng., 11(3), 206-213. https://doi.org/10.1061/(ASCE)0899-1561(1999)11:3(206)
  18. Lee, H.S., Lee, H., Moon, J.S. and Jung, H.W. (1998), "Development of tire-added latex concrete", ACI Mater. J., 95(4), 356-364.
  19. Li, G., Stubblefield, M.A., Garrick, G., Eggers, J., Abadie, C. and Huang, B. (2004), "Development of waste tire modified concrete", Cement Concrete Res., 34(12), 2283-2289. https://doi.org/10.1016/j.cemconres.2004.04.013
  20. Little, D.N. (1995), Handbook for Stabilization of Pavement Subgrades and Base Courses with Lime, Dubuque, Kendall/Hunt.
  21. Naik, T.R. and Ramme, B.W. (1990), "Effects of high-lime fly ash content on water, time of set and compressive strength of concrete", ACI Mater. J., 87(6), 619-626.
  22. Naik, T.R., Ramme, B.W. and Tews, J.H. (1994), "Use of high volumes of class C and class F fly ash in concrete", Cement, Concrete Aggregates, CCAGPD, 16(1), 12-20. https://doi.org/10.1520/CCA10556J
  23. Oikonomou, N., Stefanidou, M. and Mavridou, S. (2006), "Improvement of the bonding between rubber tire particles and cement paste in cement products", Proceedings of the 15th Conference of the Technical Chamber of Greece, Alexandroupoli, Greece, 234-242.
  24. Okafor, O.F. (2010), "Performance of recycled asphalt pavement as coarse aggregate in concrete", Leonardo Electro. J. Practices Tech., 17, 47-58.
  25. Siddique, R. and Naik, T.R. (2004), "Properties of concrete containing scrap-tire rubber-an overview", Waste Manage., 24(6), 563-569. https://doi.org/10.1016/j.wasman.2004.01.006
  26. Snelson, D.G., Kinuthia, J.M., Davies, P.A. and Chang, S.R. (2009), "Sustainable construction: Composite use of tyres and ash in concrete", Waste Manage., 29(1), 360-367. https://doi.org/10.1016/j.wasman.2008.06.007
  27. Sobhan, K. and Mashnad, M. (2003), "Fatigue behavior of a pavement foundation with recycled aggregate and waste HDPE strips", J. Geotech. Geoenvir. Eng., 129(7), 630-638. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:7(630)
  28. Topcu, I.B. (1995). "The properties of rubberized concretes", Cement Concrete Res., 25(2), 304-310. https://doi.org/10.1016/0008-8846(95)00014-3
  29. Yilmaz, A. and Degrimenci, N. (2009), "Possibility of using waste tire rubber and fly ash with Portland cement as construction materials", Waste Manage., 29(5), 1541-1546. https://doi.org/10.1016/j.wasman.2008.11.002

피인용 문헌

  1. Development of mix design method for geopolymer concrete vol.5, pp.4, 2016, https://doi.org/10.12989/acc.2017.5.4.377
  2. Eco-friendly High-Strength Concrete Engineered by Micro Crumb Rubber from Recycled Tires and Plastics for Railway Components vol.9, pp.1, 2016, https://doi.org/10.1520/acem20180058
  3. Laboratory evaluation of roller compacted concrete containing RAP vol.10, pp.6, 2016, https://doi.org/10.12989/acc.2020.10.6.489
  4. Strength characteristics of granulated ground blast furnace slag-based geopolymer concrete vol.11, pp.3, 2016, https://doi.org/10.12989/acc.2021.11.3.219
  5. Experimental Evaluation of Untreated and Pretreated Crumb Rubber Used in Concrete vol.11, pp.5, 2021, https://doi.org/10.3390/cryst11050558
  6. Lateral Infiltration Capacity of Pervious Concrete and Its Performance as Pavement Curb vol.34, pp.3, 2022, https://doi.org/10.1061/(asce)mt.1943-5533.0004101