한국가시화정보학회지 (Journal of the Korean Society of Visualization)

  • 제14권3호
  • /
  • Pages.15-21
  • /
  • 2016
  • /
  • 1598-8430(pISSN)
  • /
  • 2093-808X(eISSN)
한국가시화정보학회 (The Korean Society of Visualization)
권호 표지
DOI QR코드

DOI QR Code

중성자 영상법을 이용한 Heat Pipe 내의 이상유동 가시화

Visualization of 2-Phase Flow at Heat Pipe using Neutron Imaging Technique

  • 투고 : 2016.11.04
  • 심사 : 2016.11.16
  • 발행 : 2016.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The circular and flat heat pipe were experimentally investigated by using neutron imaging technique. This experimental study was performed at the DINGO of OPAL research reactor, Australia. The diameter of the circular heat pipe is 10 mm and the dimension of flat is $10(width){\times}3(thickness)mm2$, respectively. We used the distilled water as a coolant. The coolant distributions and 2-phase flow patterns were measured under heating conditions. Experimental results show that neutron imaging technique is a good tool to visualize the 2-phase flow and phenomena in the heat pipe. The coolant distributions and 2-phase flow patterns depend on installation posture of the heat pipe and volume ratio of the coolant. Finally, it was discussed to calculate the void fraction by neutron imaging technique.

키워드

참고문헌

  1. Lee, H. J., Kong, S.-W., Ha, S.-J., Hwang, J.-H., Jang, J.-W., Son, K.-J., and Kim, J.-S., 2009, "Flow Visualization of Bubble jet Loop Heat pipe", Proc. SAREK Summer Annual Conference, pp.279-283.
  2. Kim, C.J., Kim, H.K., and Oh, K. H., 1994, "A Visual Study on Nucleate Boiling Phenomena in a Closed Two-Phase Thermosyphon", Energy Engg. J, Vol.4(2), pp.261-269.
  3. Kim, J.S., Kwon, Y.H., and Kim, J.W., 2014, "Development of High Performance Bubble Jet Loop Heat Pipe for Hot Water Floor Heating System", Journal of the Korean Society for Power System Engineering, Vol 18(4), pp.23-28. https://doi.org/10.9726/kspse.2014.18.4.023
  4. Woo, J.H., Kim, J.S., Kong, S.U., Ha, S.J., and Lee, H.G., 2010, "A Study on the performance of Heat Transfer for Various Working Fluid of Bubble Jet Loop Heat Pipe", KOSME 2010 Fall Conference, pp. 435-436.
  5. Shin, J.S., Kwon, Y.H., and Kim, J.S., 2013, "The study of BJLHP performance according to the shape of evaporating section", Proc. SAREK 2009 Summer Annual Conference, pp.21-25.
  6. Reay, D.A., Kew, P.A., and McGlen, R.J., 2013, "Heat Pipes Thory, Design and Applicatons", Elsevier, pp. 45-52.
  7. Lee, H.J., Kong, S.W., Ha, S.J., Hwang, J.H., Jang, J.W., Son, K.J., and Kim, J.S., 2009, "Flow Visualization of Bubble Jet Loop Heat Pipe", Proc. SAREK 2009 Summer Annual Conference, pp. 279-283.
  8. Lee, S.Y., Kim, B.J., and Kim, M.H., 1993, "Two-Phase Flow Heat Transfer", Deayoungsa, PP. 14-19.
  9. Garbe, U., Randall, T., Hughes, C., Davidson, G., Pangelis, S., and Kenndy, S.J., 2015, "A new Neutron Radiography / Tomography / Imaging Station DINGO at OPAL", Physics Procedia, Vol. 69, pp.27-32. https://doi.org/10.1016/j.phpro.2015.07.003
  10. Kim, T.J., Jung, Y.M., Kim, M.H., Sim, C.H., Lee, S.W., and Jeon, J.S., 2006, "Visualization of the internal water distribution at PEMFC using neutron imaging technology: Feasibility test at HANARO", Nuclear Eng. and Technology, Vol.38(5), pp.449-454.