Steel and Composite Structures

  • 제20권3호
  • /
  • Pages.651-669
  • /
  • 2016
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire

  • Shahabi, S.E.M. (Department of Civil Engineering, University of Malaya) ;
  • Ramli Sulong, N.H. (Department of Civil Engineering, University of Malaya) ;
  • Shariati, M. (Department of Civil Engineering, University of Malaya) ;
  • Mohammadhassani, M. (Member of scientific board of Building & Housing Research Center) ;
  • Shah, S.N.R. (Department of Civil Engineering, University of Malaya)
  • 투고 : 2015.01.07
  • 심사 : 2015.11.16
  • 발행 : 2016.02.29
⟨ 이전 논문 다음 논문 ⟩

초록

The behavior of shear connectors plays a significant role in maintaining the required strength of a composite beam in normal and hazardous conditions. Various types of shear connectors are available and being utilized in the construction industry according to their use. Channel connectors are a suitable replacement for conventional shear connectors. These connectors have been tested under different types of loading at ambient temperature; however, the behavior of these connectors at elevated temperatures has not been studied. This investigation proposes a numerical analysis approach to estimate the behavior of channel connectors under fire and compare it with the numerical analysis performed in headed stud and Perfobond shear connectors subjected to fire. This paper first reviews the mechanism of various types of shear connectors and then proposes a non-linear thermo-mechanical finite element (FE) model of channel shear connectors embedded in high-strength concrete (HSC) subjected to fire. Initially, an accurate nonlinear FE model of the specimens tested at ambient temperature was developed to investigate the strength of the channel-type connectors embedded in an HSC slab. The outcomes were verified with the experimental study performed on the testing of channel connectors at ambient temperature by Shariati et al. (2012). The FE model at ambient temperature was extended to identify the behavior of channel connectors subjected to fire. A comparative study is performed to evaluate the performance of channel connectors against headed stud and Perfobond shear connectors. The channel connectors were found to be a more economical and easy-to-apply alternative to conventional shear connectors.

키워드

과제정보

연구 과제 주관 기관 : University of Malaya, PPP

참고문헌

  1. Cooke, G., Lawson, R. and Newman, G. (1988), "Fire resistance of composite deck slabs", Struct. Eng., 66, 253-261.
  2. Ellobody, E. and Young, B. (2006), "Performance of shear connection in composite beams with profiled steel sheeting", J. Construct. Steel Res., 62(7), 682-694. https://doi.org/10.1016/j.jcsr.2005.11.004
  3. Eurocode, E. (1994), Eurocode 4: Design of composite steel and concrete structures-Part 1-2: General rules-Structural fire design, British Standards Institution, BS EN: 1-2.
  4. Fahrni Hani, M. and Tamara, T. (2012), "Finite element analysis of composite steel-concrete beams subjected to fire", Nahrain University College of Engineering Journal (NUCEJ), 15(1), 1-11.
  5. Huang, Z., Burgess, I.W. and Plank, R.J. (1999), "The influence of shear connectors on the behaviour of composite steel-framed buildings in fire", J. Construct. Steel Res., 51(3), 219-237. https://doi.org/10.1016/S0143-974X(99)00028-0
  6. Lam, D. and El-Lobody, E. (2005), "Behavior of headed stud shear connectors in composite beam", J. Struct. Eng., 131, 96. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:1(96)
  7. Lamont, S., Usmani, A. and Gillie, M. (2004), "Behaviour of a small composite steel frame structure in a "long-cool" and a "short-hot" fire", Fire Safe. J., 39(5), 327-357. https://doi.org/10.1016/j.firesaf.2004.01.002
  8. Lu, W., Ma, Z., Makelainen, P. and Outinen, J. (2012), "Behaviour of shear connectors in cold-formed steel sheeting at ambient and elevated temperatures", Thin-Wall. Struct., 61, 229-238. https://doi.org/10.1016/j.tws.2012.04.008
  9. Majdi, Y., Hsu, C.-T.T. and Zarei, M. (2014), "Finite element analysis of new composite floors having coldformed steel and concrete slab", Eng. Struct., 77, 65-83. https://doi.org/10.1016/j.engstruct.2014.07.030
  10. Maleki, S. and Bagheri, S. (2008), "Behavior of channel shear connectors, Part I: Experimental study", J. Construct. Steel Res., 64(12), 1333-1340. https://doi.org/10.1016/j.jcsr.2008.01.010
  11. Meaud, C., Jurkiewiez, B. and Ferrier, E. (2014), "Steel-concrete bonding connection: An experimental study and non-linear finite element analysis", Int. J. Adhes. Adhes., 54, 131-142. https://doi.org/10.1016/j.ijadhadh.2014.05.010
  12. Mirza, O. and Uy, B. (2009), "Behaviour of headed stud shear connectors for composite steel-concrete beams at elevated temperatures", J. Construct. Steel Res., 65(3), 662-674. https://doi.org/10.1016/j.jcsr.2008.03.008
  13. Nguyen, H. and Kim, S. (2009), "Finite element modeling of push-out tests for large stud shear connectors", J. Construct. Steel Res., 65(10-11), 1909-1920. https://doi.org/10.1016/j.jcsr.2009.06.010
  14. Pashan, A. (2006), "Behaviour of channel shear connectors: Push-out tests", M.S. Thesis; Department of Civil Engineering, University of Saskatchewan, Canada.
  15. Patrick, M. (2000), "Experimental investigation and design of longitudinal shear reinforcement in composite edge beams", Progress Struct. Eng. Mater., 2(2), 196-217. https://doi.org/10.1002/1528-2716(200004/06)2:2<196::AID-PSE22>3.0.CO;2-2
  16. Quevedo, R.L. and Silva, V.P. (2013), "Thermal analysis of push-out tests at elevated temperatures", Fire Safe. J., 55, 1-14. https://doi.org/10.1016/j.firesaf.2012.08.009
  17. Ranzi, G. and Bradford, M.A. (2007), "Composite beams with both longitudinal and transverse partial interaction subjected to elevated temperatures", Eng. Struct., 29(10), 2737-2750. https://doi.org/10.1016/j.engstruct.2007.01.022
  18. Rodrigues, J.P.C. and Laim, L. (2011), "Behaviour of perfobond shear connectors at high temperatures", Eng. Struct., 33(10), 2744-2753. https://doi.org/10.1016/j.engstruct.2011.05.004
  19. Sanad, A., Rotter, J., Usmani, A. and O'Connor, M. (2000), "Composite beams in large buildings under fire-numerical modelling and structural behaviour", Fire Safe. J., 35(3), 165-188. https://doi.org/10.1016/S0379-7112(00)00034-5
  20. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel & Composite Structures, Sydney, Australia, July.
  21. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Mahoutian, M. (2011), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Sci. Res. Essays, 6(4), 977-983.
  22. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2012), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. https://doi.org/10.1016/j.matdes.2011.08.008
  23. Standard, B. (1994), "Structural use of steelwork in building", BS5950 Part 4: Code of practice for design of composite slabs with profiled steel sheeting.
  24. Tests, I.F.R. (1975), "Elements of Building Construction, ISO-834", International Organization for Standardization, Geneva, Switzerland.
  25. Wang, A.J. (2011), "Numerical investigation into headed shear connectors under fire", J. Struct. Eng., 138(1), 118-122.
  26. Zhao, B. and Kruppa, J. (1995), "Fire resistance of composite slabs with profiled steel sheet and of composite steel concrete beams (Part 2, Composite beams)", Final Report; ECSC - agreement No. 7210 SA 509, CTICM, Luxembourg.

피인용 문헌

  1. Crashworthiness of G4(2W) guardrail system: a finite element parametric study vol.22, pp.2, 2017, https://doi.org/10.1080/13588265.2016.1243636
  2. Numerical studies on shear resistance of headed stud connectors in different concretes under Arctic low temperature vol.112, 2016, https://doi.org/10.1016/j.matdes.2016.09.062
  3. Distribution of shear force in perforated shear connectors vol.27, pp.3, 2016, https://doi.org/10.12989/scs.2018.27.3.389
  4. Shear capacity equation for channel shear connectors in steel-concrete composite beams vol.28, pp.4, 2016, https://doi.org/10.12989/scs.2018.28.4.483
  5. Strengthening of bolted shear joints in industrialized ferrocement construction vol.28, pp.6, 2016, https://doi.org/10.12989/scs.2018.28.6.681
  6. Application of ANFIS technique on performance of C and L shaped angle shear connectors vol.22, pp.3, 2018, https://doi.org/10.12989/sss.2018.22.3.335
  7. Practical use of computational building information modeling in repairing and maintenance of hospital building- case study vol.22, pp.5, 2016, https://doi.org/10.12989/sss.2018.22.5.575
  8. Computational optimized finite element modelling of mechanical interaction of concrete with fiber reinforced polymer vol.23, pp.1, 2016, https://doi.org/10.12989/cac.2019.23.1.061
  9. Computational and experimental analysis of beam to column joints reinforced with CFRP plates vol.30, pp.3, 2016, https://doi.org/10.12989/scs.2019.30.3.271
  10. An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections vol.30, pp.5, 2016, https://doi.org/10.12989/scs.2019.30.5.433
  11. Moment-rotation prediction of precast beam-to-column connections using extreme learning machine vol.70, pp.5, 2016, https://doi.org/10.12989/sem.2019.70.5.639
  12. The effect of wollastonite powder with pozzolan micro silica in conventional concrete containing recycled aggregate vol.24, pp.4, 2016, https://doi.org/10.12989/sss.2019.24.4.541
  13. Application of waste tire rubber aggregate in porous concrete vol.24, pp.4, 2016, https://doi.org/10.12989/sss.2019.24.4.553
  14. Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures vol.33, pp.3, 2016, https://doi.org/10.12989/scs.2019.33.3.319
  15. Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete vol.8, pp.3, 2016, https://doi.org/10.12989/acc.2019.8.3.225
  16. Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings vol.33, pp.4, 2019, https://doi.org/10.12989/scs.2019.33.4.569
  17. Practical Design Methods for Fire Resistance of Restrained Cellular Steel Beams vol.19, pp.6, 2016, https://doi.org/10.1007/s13296-019-00248-w
  18. Comparison of dynamic behavior of shallow foundations based on pile and geosynthetic materials in fine-grained clayey soils vol.19, pp.6, 2016, https://doi.org/10.12989/gae.2019.19.6.473
  19. Strain rate effects on soil-geosynthetic interaction in fine-grained soil vol.19, pp.6, 2016, https://doi.org/10.12989/gae.2019.19.6.533
  20. Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS) vol.34, pp.1, 2016, https://doi.org/10.12989/scs.2020.34.1.155
  21. Depiction of concrete structures with seismic separation under faraway fault earthquakes vol.9, pp.1, 2020, https://doi.org/10.12989/acc.2020.9.1.071
  22. On transient hygrothermal vibration of embedded viscoelastic flexoelectric/piezoelectric nanobeams under magnetic loading vol.8, pp.1, 2016, https://doi.org/10.12989/anr.2020.8.1.049
  23. Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load vol.20, pp.2, 2016, https://doi.org/10.12989/gae.2020.20.2.087
  24. Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines vol.34, pp.3, 2016, https://doi.org/10.12989/scs.2020.34.3.347
  25. The effect of RBS connection on energy absorption in tall buildings with braced tube frame system vol.34, pp.3, 2016, https://doi.org/10.12989/scs.2020.34.3.393
  26. Optimizing reinforced concrete beams under different load cases and material mechanical properties using genetic algorithms vol.34, pp.4, 2020, https://doi.org/10.12989/scs.2020.34.4.467
  27. Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm) vol.25, pp.2, 2016, https://doi.org/10.12989/sss.2020.25.2.183
  28. Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns vol.34, pp.5, 2016, https://doi.org/10.12989/scs.2020.34.5.743
  29. Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns vol.34, pp.5, 2016, https://doi.org/10.12989/scs.2020.34.5.743
  30. Thermo-electro-elastic nonlinear stability analysis of viscoelastic double-piezo nanoplates under magnetic field vol.73, pp.5, 2016, https://doi.org/10.12989/sem.2020.73.5.565
  31. Elevated temperature resistance of concrete columns with axial loading vol.9, pp.4, 2016, https://doi.org/10.12989/acc.2020.9.4.355
  32. Computational analysis of three dimensional steel frame structures through different stiffening members vol.35, pp.2, 2016, https://doi.org/10.12989/scs.2020.35.2.187
  33. Performance assessment of buckling restrained brace with tubular profile vol.8, pp.4, 2020, https://doi.org/10.12989/anr.2020.8.4.323
  34. Computational earthquake performance of plan-irregular shear wall structures subjected to different earthquake shock situations vol.18, pp.5, 2020, https://doi.org/10.12989/eas.2020.18.5.567
  35. Analysis of extended end plate connection equipped with SMA bolts using component method vol.36, pp.2, 2020, https://doi.org/10.12989/scs.2020.36.2.213
  36. Investigation on the monotonic behavior of the steel rack upright-beam column connection vol.26, pp.1, 2016, https://doi.org/10.12989/sss.2020.26.1.103
  37. Investigation on the monotonic behavior of the steel rack upright-beam column connection vol.26, pp.1, 2016, https://doi.org/10.12989/sss.2020.26.1.103
  38. A model to develop the porosity of concrete as important mechanical property vol.26, pp.2, 2016, https://doi.org/10.12989/sss.2020.26.2.147
  39. Indirect measure of shear strength parameters of fiber-reinforced sandy soil using laboratory tests and intelligent systems vol.22, pp.5, 2016, https://doi.org/10.12989/gae.2020.22.5.397
  40. Performance of composite frame consisting of steel beams and concrete filled tubes under fire loading vol.36, pp.5, 2016, https://doi.org/10.12989/scs.2020.36.5.587
  41. Influence of porosity and cement grade on concrete mechanical properties vol.10, pp.5, 2016, https://doi.org/10.12989/acc.2020.10.5.393
  42. Application of discrete element method (DEM) in characterization of bond-slip behavior in RC beams with confinement subjected to corrosion vol.28, pp.None, 2016, https://doi.org/10.1016/j.istruc.2020.10.026
  43. Internally fire protected composite steel-concrete slim-floor beam vol.227, pp.None, 2016, https://doi.org/10.1016/j.engstruct.2020.111447
  44. Smart estimation of automatic approach in enhancing the road safety under AASHTO Standard specification and STM vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.389
  45. Application of multi-hybrid metaheuristic algorithm on prediction of split-tensile strength of shear connectors vol.28, pp.2, 2016, https://doi.org/10.12989/sss.2021.28.2.167
  46. Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method vol.40, pp.6, 2016, https://doi.org/10.12989/scs.2021.40.6.853
  47. Evaluation and monitoring of impact resistance of fiber reinforced concrete by adaptive neuro fuzzy algorithm vol.34, pp.None, 2016, https://doi.org/10.1016/j.istruc.2021.09.072
  48. Structural behaviour of isolated composite beam-slab system subject to elevated temperature vol.188, pp.None, 2016, https://doi.org/10.1016/j.jcsr.2021.107027
  49. Fire resistance of light wood frame walls sheathed with innovative gypsum-particle composite: Experimental investigations vol.45, pp.None, 2016, https://doi.org/10.1016/j.jobe.2021.103576