DOI QR코드

DOI QR Code

Development of Connection Details for a Double Split Tee Connection Without a Shear Tab

전단탭이 없는 상·하부 스플릿 티 접합부의 접합부상세 개발

  • Yang, Jae Guen (Department of Architectural Engineering, Inha University) ;
  • Kim, Yong Boem (Department of Architectural Engineering, Inha University)
  • Received : 2016.01.11
  • Accepted : 2016.02.17
  • Published : 2016.02.27

Abstract

The double split tee connection, a type of beam-to-column moment connection, exhibits different behavioral characteristics according to changes in the thickness of the T-stub flange, the gauge distance of the high-strength bolt, and the number and diameter of high-strength bolts. In general, the double split tee connection is idealized and designed so that a T-stub fastened to the top and bottom supports a flexural moment, and a shear tab supports a shear force. However, if the double split tee connection is applied to low-and medium-rise steel structures, the size of the beam member becomes small, and thus the shear tab cannot be bolted to the web of a beam. In this regard, this study was conducted to propose connection details to ensure that the double split tee connection with a geometric shape can display sufficient shear resisting capacity. To this end, experiments were conducted using full-scale specimens for the double split tee connection.

상 하부 스플릿 티 접합부는 보-기둥 모멘트 접합부의 한 형태로 T-stub 플랜지의 두께, 고장력볼트의 게이지 거리, 고장력볼트의 개수, 고장력볼트의 직경 등의 변화에 따라서 상이한 거동특성을 나타낸다. 상 하부 스플릿 티 접합부는 일반적으로 상 하부에 체결된 T-stub이 휨모멘트를 지지하고 전단탭이 전단력을 지지하는 것으로 이상화하여 설계되고 있다. 그러나 중 저층 강구조물에 상 하부 스플릿 티 접합부가 적용되면 보 부재의 규격이 작아지므로 보 웨브에 전단탭을 설치할 수 없는 경우가 발생할 수 있다. 이 연구는 이와 같이 보 웨브에 전단탭 설치가 어려운 기하학적 형상을 갖는 상 하부 스플릿 티 접합부가 충분한 전단력 지지능력을 발현하도록 하는 접합부상세를 제안하기 위하여 진행하였다. 이를 위하여 상 하부 스플릿 티 접합부에 대한 실험체를 제작하여 실물대 실험을 수행하였다.

Keywords

References

  1. Kim, H.D., Yang, J.G., Lee, J.Y., and Lee, H.D. (2014) Evaluation of the Initial Rotational Stiffness of a Double Split Tee Connection, International Journal of Steel Structures, KSSC, Vol.26, No.2, pp.133-142.
  2. Yang, J.G., Kim, J.W., and Kim, Y. (2012) Design Formula for the Flexural Strength of a Double Split Tee Connection, International Journal of Steel Structures, KSSC, Vol.24, No. 5, pp.511-520.
  3. Yang, J.G., Kim, Y., and Park, J.H. (2012) Prediction Model for the Initial Rotational Stiffness of a Double Split T Connection, Journal of Korean Society of Steel Structures, KSSC, Vol.24, No.3, pp.279-287 (in Korean).
  4. Faella, C., Piluso, V., and Rizzano, G. (2000) Structural Steel Semi-Rigid Connections: Theory, Design, and Software, CRC Press.
  5. Kulak, G.L., Fisher, J.W., and Struik, J.H.A. (2001) Guide To Design Criteria For Bolted and Riveted Joints 2nd Ed., American Institute of Steel Construction, Wiley, New York.
  6. Yang, J.G., Park, J.H., Choi, J.H., and Kim, S.M. (2011) Characteristic Behavior of a T-stub Connection Under Shear, Including the Effects of Prying Action and Bolt Pretension, The 6th International Symposium on Steel Structures, KSSC, Korea, pp.1086-1092.
  7. Yang, J.G., Kim, H.K., and Park, J.H. (2012) Experimental Test Specimens for the Initial Axial Tensile Stiffness and Ultimate Tensile Load of a T-Stub, Including the Effects of Prying Action, International Journal of Steel Structures, KSSC, Vol.24, No.3, pp.279-287.
  8. FEMA-350 (2000) Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings, prepared by the SAC Joint Venture for the Federal Emergency Management Agency, Washington DC.
  9. Astaneh, A. (1985) Procedure For Design and Analysis of Hanger-Type Connections, Engineering Journal, AISC, Vol.22, No.2, pp.63-66.
  10. Piluso, V., Faella, C., and Rizzano, G. (2001) Ultimate Behavior of Bolted T-stubs. I : Theoretical Model, Journal of Structural Engineering, ASCE, Vol.127, No.6, pp.686-693. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:6(686)
  11. Piluso, V., Faella, C., and Rizzano, G. (2001) Ultimate Behavior of Bolted T-stubs. II : Model Validation, Journal of Structural Engineering, ASCE, Vol.127, No.6, pp.694-704. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:6(694)
  12. Swanson, J.A. (2002) Ultimate Strength Prying Models for Bolted T-stub Connections, Engineering Journal, AISC, Vol.39, No.3, pp.136-147.
  13. Swanson, J.A., Kokan, D.S., and Leon, R.T. (2002) Advanced Finite Element Modeling of Bolted T-stub Connection Components, Journal of Constructional Steel Research, Elsevier, Vol.58, No.5, pp.1015-1031. https://doi.org/10.1016/S0143-974X(01)00098-0
  14. Thornton, W.A. (1985) Prying Action: A General Treatment, Journal of Environmental Engineering, AISC, Vol.22, pp.67-75.
  15. Girao Coelho, A.M., Simoes da Silva, L., and Bijlaard, F.S.K. (2004) Characterization of The Nonlinear Behaviour of Single Bolted T-stub Connections, Proceedings of The Fifth International Workshop on Connections : Connections in Steel Structures, Behavior, Strength and Design, AISC-ECCS, Amsterdam, pp.53-120.
  16. Girao Coelho, A.M., Simoes da Silva, L., and Bijlaard, F.S.K. (2006) Finite-Element Modeling of the Nonlinear Behavior of Bolted T-stub Connections, Journal of Structural Engineering, ASCE, Vol.132, No.6, pp.918-928. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:6(918)
  17. Lemonis, M.E. and Gantes, C.J. (2006) Incremental Modeling of T-Stub Connections, Journal of Mechanics of Materials and Structures, Vol.1, No.7, pp.1135-1159. https://doi.org/10.2140/jomms.2006.1.1135
  18. Stankiewicz, B. (2002) Experimental Tests of T-stub Joints and Refined Finite Element Method Computer Model, EUROSTEEL 2002, Coimbra, Portugal.
  19. Kim, H.D., Yang, J.G., Lee, J.Y., and Lee, H.D. (2014) Evaluation of the Initial Rotational Stiffness of a Double Split Tee Connection, Including the Effects of Prying Action, International Journal of Steel Structures, KSSC, Vol.26, No.2, pp.133-142.
  20. Yang, J.G., Lee, H.D., Kim, Y.B., and Pae, D.S. (2015) Proposal of Connection Details for a Double Splte Tee Connection Without a Shear tab, International Journal of Steel Structures, KSSC, Vol.27, No.5, pp.423-433.
  21. Yang, J.G., Choi, J.H., Kim, H.K., and Park, J.H. (2011) Experimental Tests and Analytical Study for the Prediction of the Plastic Moment Capacity of an Unstiffened Top and Seat Angle Connection, International Journal of Steel Structures, KSSC, Vol.23, No.5, pp.547-555.
  22. Oh, K.H., Seo, S.Y., Kim, S.Y., Yang, Y.S., and Kim, K.S. (2005) An Experimental Study on the Seismec Performance of Shear Connections and Rib Plate H Beam to Column Connections, International Journal of Steel Structures, KSSC, Vol.17, No.5, pp.569-580.