Advances in materials Research

  • 제5권3호
  • /
  • Pages.171-179
  • /
  • 2016
  • /
  • 2234-0912(pISSN)
  • /
  • 2234-179X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

An experimental study on strength of hybrid mortar synthesis with epoxy resin, fly ash and quarry dust under mild condition

  • Sudheer, P. (Department of Civil Engineering, MVGR College of Engineering) ;
  • Muni Reddy, M.G. (Department of Civil Engineering, College of Engineering, Andhra University) ;
  • Adiseshu, S. (Department of Civil Engineering, College of Engineering, Andhra University)
  • 투고 : 2016.05.31
  • 심사 : 2016.11.21
  • 발행 : 2016.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

Fusion and characterization of bisphenol-A diglycidyl ether based thermosetting polymer mortars containing an epoxy resin, Fly ash and Rock sand are presented here for the Experimental study. The specimens have been prepared by means of an innovative process, in mild conditions, of commercial epoxy resin, Fly ash and Rock sand based paste. In this way, thermosetting based hybrid mortars characterized by a different content of normalized Fly ash and Rock sand by a homogeneous dispersion of the resin have been obtained. Once hardened, these new composite materials show improved compressive strength and toughness in respect to both the Fly ash and the Rock sand pastes since the Resin provides a more cohesive microstructure, with a reduced amount of micro cracks. The micro structural characterization allows pointing out the presence of an Interfacial Transition Zone similar to that observed in cement based mortars. A correlation between micro-structural features and mechanical properties of the mortar has also been studied.

키워드

참고문헌

  1. Andini, S., Cioffi, R., Colangelo, F., Montagnaro, F. and Santoro, L. (2008), "Coal fly ash as raw material for the manufacture of geopolymer-based products", Waste Manag., 28(2), 416-423.
  2. Carella, A., Borbone, F., Roviello, A., Roviello, G., Tuzi, A., Kravinsky, A., Shikler, R., Cantele, G. and Ninno, D. Benzodifuroxazinones (2012), "A new class of heteroacene molecules for possible applications in organic electronics: Synthesis, electronic properties and crystal structure", Dyes Pigment., 95(1), 116-125. https://doi.org/10.1016/j.dyepig.2012.03.033
  3. Davidovits, J. (2011), Geopolymer, Chemistry and Applications, 3rd ed., Institute Geopolymer: Saint-Quentin, France, 10-11.
  4. Ferone, C., Colangelo, F., Cioffi, R., Montagnaro, F. and Santoro, L. (2013), "Use of reservoir clay sediments as raw materials for geopolymer binders", Adv. Appl. Ceram., 112(4), 184-189. https://doi.org/10.1179/1743676112Y.0000000064
  5. Ferone, C., Colangelo, F., Cioffi, R., Montagnaro, F. and Santoro, L. (2011), "Mechanical performances of weathered coal fly ash based geopolymer bricks", Procedia Eng., 21, 745-752. https://doi.org/10.1016/j.proeng.2011.11.2073
  6. Ferone, C., Colangelo, F., Roviello, G., Asprone, D., Menna, C., Balsamo, A., Prota, A., Cioffi, R. and Manfredi, G. (2013), "Application-oriented chemical optimization of a metakaolin based geopolymer", Mater., 6(5), 1583-1598.
  7. Habert, G., d'Espinose de Lacaillerie, J.B. and Roussel, N. (2011), "An environmental evaluation of geopolymer based concrete production: Reviewing current research trends", J. Clean. Prod., 19(11), 1229-1238. https://doi.org/10.1016/j.jclepro.2011.03.012
  8. Iucolano, F., Liguori, B., Caputo, D., Colangelo, F. and Cioffi, R. (2013), "Recycled plastic aggregate in mortars composition: Effect on physical and mechanical properties", Mater. Des., 52, 916-922. https://doi.org/10.1016/j.matdes.2013.06.025
  9. Kuenzel, C., Vandeperre, L.J., Donatello, S., Boccaccini, A.R. and Cheeseman, C. (2012), "Ambient temperature drying shrinkage and cracking in metakaolin-based geopolymers", J. Am. Ceram. Soc., 95(10), 3270-3277. https://doi.org/10.1111/j.1551-2916.2012.05380.x
  10. Lancellotti, I., Catauro, M., Ponzoni, C., Bollino, F. and Leonelli, C. (2013), "Inorganic polymers from alkali activation of metakaolin: Effect of setting and curing on structure", J. Solid State Chem., 200, 341-348. https://doi.org/10.1016/j.jssc.2013.02.003
  11. Li, G., Lamberti, M., Roviello, G. and Pellecchia, C. (2012), "New titanium and hafnium complexes bearing [-NNN-] pyrrolylpyridylamido ligands as olefin polymerization catalysts", Organometallics, 31(19), 6772-6778. https://doi.org/10.1021/om300519s
  12. Roviello, A., Buono, A., Carella, A., Roviello, G., Cassinese, A., Barra, M. and Biasucci, M. (2007), "Regioregularpoly[3-(4-alkoxyphenyl)thiophene]s", J. Polym. Sci. Pol. Chem., 45(9), 1758-1770. https://doi.org/10.1002/pola.21943
  13. Roviello, G.N., Roviello, G., Musumeci, D., Bucci, E.M. and Pedone, C. (2012), "Dakin-west reaction on 1-thyminyl acetic acid for the synthesis of 1,3-bis(1-thyminyl)-2-propanone, a heteroaromatic compound with nucleopeptide-binding properties", Amino Acid., 43(4), 1615-1623. https://doi.org/10.1007/s00726-012-1237-7

피인용 문헌

  1. Study on Strength of Hybrid Mortar Synthesis with Epoxy Resin, Fly Ash and Quarry Dust Under Extreme Conditions vol.225, 2017, https://doi.org/10.1088/1757-899X/225/1/012169