DOI QR코드

DOI QR Code

Reducing Ship Rolling with a Anti-Rolling Pendulum

안티롤링 진자를 이용한 부유체의 횡동요 저감

  • Park, Sok-Chu (Division of Naval Architecture and Ocean Engineering System, National Korea Maritime University) ;
  • Yi, Geum-Joo (Graduate School, National Korea Maritime University) ;
  • Park, Kyung-Il (Khan co., ltd.)
  • Received : 2016.07.25
  • Accepted : 2016.11.01
  • Published : 2016.12.31

Abstract

A ship's rolling motion can make crew and passengers sick and/or apply forces to the structure that cause damage.. Therefore bilge keels are equipped in most ships for anti-rolling. In special cases, anti-rolling tanks (ARTs), fin stabilizers, or gyroscopes can be installed. However, ARTs require a large area to install, and fin stabilizers and gyroscopes are costly to install and expensive to operate. This paper suggests a Anti-rolling pendulum (ARP) to reduce roll motion. ARPs acts like ARTs. However, the ARP has a circular shaped guidance arc instead of the string or wire of a simple pendulum. The device suggested has about 1/ 8 the weight and 1/ 6 the volume of a ART and is more effective. This study derives the nonlinear and linear differential equations of system motion.

부유체의 횡동요는 승조원의 피로를 누적시키고, 심지어 구조물 전체를 전복시키기 까지 하고, 또 선체에 반복적인 외력을 가하는 등 부유체의 안정성과 구조물의 안전에 심대한 영향을 끼친다. 그래서 거의 모든 선박의 경우에는 빌지킬을 설치하여 횡동요를 감소시키고 있고, 특수한 경우에는 안티롤링 탱크나 핀 스태빌라이저나 자이로스코프 등을 설치하여 횡동요를 줄이고 있다. 그러나 안티롤링 탱크는 설치하는데 용적을 많이 차지하고, 핀 스태빌라이저나 자이로스코프는 설치비와 유지 관리비가 많이 든다. 본 연구에서는 안티롤링 진자를 이용하여 부유체의 횡동요를 줄이고자 한다. 보통 단진자라고 하면 질량체를 끈으로 어디엔가 고정시켜 놓고 자유롭게 흔들리는 구조를 말한다. 여기에서는 통상의 진자 대신에 진자를 원궤도에 올려놓아서 단진동 운동을 하도록 하는 원리를 이용한다. 제안한 장치를 실험선에 적용하여 그 효능을 입증하였다. 안티롤링 탱크의 약 1/8의 중량과 약 1/6의 용적을 가진 안티롤링 진자를 이용하여 이것보다 더 좋은 효과를 낼 수 있음을 확인하였다. 여기에 더하여 선체에 안티롤링 진자를 부가한 모델의 선형운동방정식과 비선형 운동방정식을 제시하였다.

Keywords

References

  1. Ahmed F. Abdel Gawad, Saad A. Ragab, Ali H. Nayfeh, Dean T. M(2001), Roll stabilization by ani-roll passive tanks, Ocean Engineering, 28, pp. 457-469. https://doi.org/10.1016/S0029-8018(00)00015-9
  2. Moon, S. J., Jeong, J. A., Yoon, H. K., Lee, G. J., Ahn, S. P(2005), "An Experimental Study on Mass Driving Amti-Rolling System for Ships," Transaction of the Society of Naval Architecs of Korea, Vol. 42, pp. 665-672.
  3. Koike, Y., Saeki, A., Mutaguchi, M., Imazeki, M., Miyabe, H., Yamashitar, S(1999), "Application of Hybrid Anti-Rolling System to Actual Ship," Transaction of the society of Naval Architecture of Japan, Vol. 185, pp. 111-117.
  4. Koike, Y., Yoshikai K., Hiroshige. E., Tanida, K., Mutaguchi, M(1994), "Study and At-sea Experiment on Actively Controlled Anti-Rolling System," Transaction of the society of Naval Architecture of Japan, Vol. 176, pp. 137-143.
  5. Oikawa, M., Koike. Y, Chatani. Y(1993), "Study and At-sea Experiment on Actively Controlled Anti-Rolling System," Transaction of the society of Naval Architecture of Japan, Vol. 174, pp. 217-223.
  6. Popular Mechanics(1932), "Fins Proposed For Big Liners To Prevent Rolling," Popular Mechanics, August, p. 251.
  7. Popular Mechanics(1933), "Fins to Stop Ship's Rolling Governed by Gyro," Popular Mechanics, April, p. 509.
  8. Rao S. S.(2005), Mechanical vibrations 4th ed., Pearson Education Korea Ltd., pp. 730-733.
  9. Society of Naval Architects and Marine Engineers(1989), Principles of Naval Architecture, Vol. 3, p. 127.
  10. Yoon H. K., Lee G. J., Lee C. M.(2004), "Modeling and Simulation of a Ship with Anti-Rolling Devices in Waves," Joural of Korean Navigation and Port Research, Vol. 28, No. 5, pp. 347-352. https://doi.org/10.5394/KINPR.2004.28.5.347