한국섬유공학회지 (Textile Science and Engineering)

  • 제53권6호
  • /
  • Pages.385-390
  • /
  • 2016
  • /
  • 1225-1089(pISSN)
  • /
  • 2288-6419(eISSN)
한국섬유공학회 (The Korean Fiber Society)
권호 표지
DOI QR코드

DOI QR Code

산소유도제로서 아이오딘을 도핑한 폴리카보실란으로 부터 전환된 탄화규소섬유

Silicon Carbide Fibers Derived from Polycarbosilane Doped with Iodine as Oxygen Inducer

  • Khishigbayar, Khos-Erdene (Ceramic Fiber and Composite Materials Center, Korea Institute of Ceramic Engineering and Technology) ;
  • Seo, Jung-Min (Ceramic Fiber and Composite Materials Center, Korea Institute of Ceramic Engineering and Technology) ;
  • Cho, Kwang-Youn (Ceramic Fiber and Composite Materials Center, Korea Institute of Ceramic Engineering and Technology)
  • 투고 : 2016.10.21
  • 심사 : 2016.11.09
  • 발행 : 2016.12.31
⟨ 이전 논문 다음 논문 ⟩

초록

Silicon oxycarbides (SiOxCy) fabricated at $1300^{\circ}C$ from iodine-doped polycarbosilane (PCS) have been shown to have high tensile strength. Iodine doping of PCS can induce oxygen atoms into the molecular structure of PCS, which forces it to start cross-linking at a relatively low temperature of $180^{\circ}C$. The mechanical properties of fabricated SiC fibers strongly depend on the degree of cross-linking during stabilization. In this study, the role of oxygen in the cross-linking reaction of PCS was investigated by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TG), scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) analysis.

키워드

참고문헌

  1. S. Yajima, Y. Hasegawa, J. Hayashi, and M. Limura, "Synthesis of Continuous Silicon Carbide Fibre with High Tensile Strength and High Young's Modulus: Part 1 Synthesis of Polycarbosilane as Precursor", J. Mater. Sci., 1978, 13, 2569-2576.
  2. R. K. Gupta, R. Mishra, R. K. Tiwari, A. Ranjan, and A. K. Saxena, "Studies on the Rheological Behavior of Polycarbosilane Part I: Effect of Time, Temperature and Atmosphere", Silicon, 2011, 3, 27-35. https://doi.org/10.1007/s12633-010-9054-7
  3. C. Zheng, B. Zhu, X. Li, and Y. Wang, "Study on Thermalcuring of Polycarbosilane Fibers", Acta Polym. Sin., 2004, 1(2), 246-250.
  4. L. V. Interrante, K. Moraes, Q. Liu, N. Lu, A. Puerta, and L. G. Sneddon, "Silicon-based Ceramics from Polymer Precursors", Pure Appl. Chem., 2003, 74, 2111-2117.
  5. T. Taki, S. Maeda, K. Okamura, M. Sato, and T. Matsuzawa, "Oxidation Curing Mechanism of Polycarbosilane Fibers by Solid-state 29Si High-resolution NMR", J. Mater Sci. Lett., 1987, 6, 826-828. https://doi.org/10.1007/BF01729026
  6. J. Hong, K. Y. Cho, D. G. Shin, J. I. Kim, S. T. Oh, and D. H. Riu, "Low-temperature Chemical Vapour Curing Using Iodine for Fabrication of Continuous Silicon Carbide Fibres from Low-molecular-weight Polycarbosilane", J. Mater. Chem. A, 2014, 2, 2781-2793. https://doi.org/10.1039/c3ta13727a
  7. H. Ichikawa, F. Machino, S. Mitsuno, T. Ishikawa, K. Okamura, and Y. Hasegawa, "Synthesis of Continuous Silicon Carbide Fibre - Part 5 Factors Affecting Stability of Polycarbosilane to Oxidation", J. Mater. Sci., 1986, 21, 4352-4358. https://doi.org/10.1007/BF01106555
  8. A. Tazi Hemida, H. Tenailleau, L. Bardeau, R. Pailler, M. Birot, J. P. Pillot, and J. Dunogues, "A Quasi-stoichiometric SiCbased Experiment Fibre Obtained from a Boron-doped Polycarbosilane Precursor", J. Mater. Sci., 1997, 32, 5791-5796. https://doi.org/10.1023/A:1018682120642
  9. X. Cheng, Z. Xie, J. Xiao, and Y. Song, "Influence of Temperature on the Properties of Polycarbosilane", J. Inorg. Organomet P, 2005, 15, 253-259. https://doi.org/10.1007/s10904-004-5542-9
  10. F. Cao, D. P. Kim, X. D. Li, C. X. Feng, and Y. C. Song, "Synthesis of Polyalumino-carbosilane and Reaction Mechanism Study", J. Appl. Polym. Sci., 2002, 85, 2787-2792. https://doi.org/10.1002/app.10781