DOI QR코드

DOI QR Code

Grain Size Effect on Mechanical Properties of Polycrystalline Graphene

  • Park, Youngho (Korea Institute of Ceramic Engineering and Technology) ;
  • Hyun, Sangil (Korea Institute of Ceramic Engineering and Technology) ;
  • Chun, Myoungpyo (Korea Institute of Ceramic Engineering and Technology)
  • Received : 2016.11.30
  • Accepted : 2016.12.22
  • Published : 2016.12.31

Abstract

Characteristics of nanocrystalline materials are known substantially dependent on the microstructure such as grain size, crystal orientation, and grain boundary. Thus it is desired to have systematic characterization methods on the various nanomaterials with complex geometries, especially in low dimensional nature. One of the interested nanomaterials would be a pure two-dimensional material, graphene, with superior mechanical, thermal, and electrical properties. In this study, mechanical properties of "polycrystalline" graphene were numerically investigated by molecular dynamics simulations. Subdomains with various sizes would be generated in the polycrystalline graphene during the fabrication such as chemical vapor deposition process. The atomic models of polycrystalline graphene were generated using Voronoi tessellation method. Stress strain curves for tensile deformation were obtained for various grain sizes (5~40 nm) and their mechanical properties were determined. It was found that, as the grain size increases, Young's modulus increases showing the reverse Hall-Petch effect. However, the fracture strain decreases in the same region, while the ultimate tensile strength (UTS) rather shows slight increasing behavior. We found that the polycrystalline graphene shows the reverse Hall-Petch effect over the simulated domain of grain size (< 40 nm).

Keywords

References

  1. Dinadayalane, T.C., and Leszczynski, J., "Remarkable Diversity of Carbon-carbon Bonds: Structures and Properties of Fullerenes, Carbon Nanotubes, and Graphene," Structural Chemistry, Vol. 21, Iss. 6, 2010, pp. 1155-1169. https://doi.org/10.1007/s11224-010-9670-2
  2. Stankovich, S., Dikin, D.A., Dommett, G.H.B., Kohlhaas, K.M., Zimney, E.J., Stach, E.A., Piner, R.D., Nguyen, S.B.T., and Ruoff, R.S., "Graphene-based Composite Materials," Nature, Vol. 442, No. 7100, 2006, pp. 282-286. https://doi.org/10.1038/nature04969
  3. Bergmann, D.J., "The Dielectric Constant of a Composite Material - a Problem in Classical Physics", Phys. Rep. Vol. 43, No. 9, 1978, pp. 377-407. https://doi.org/10.1016/0370-1573(78)90009-1
  4. Wei, C., Wei, X., Kysar, J.W., and Hone, J., "Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene," Science, Vol. 321, Iss. 5887, 2008, pp. 385-388. https://doi.org/10.1126/science.1157996
  5. Liu, F., Ming, P., and Li, J., "Ab Initio Calculation of Ideal Strength and Phonon Instability of Graphene under Tension", Phys. Rev. B, Vol. 76, Iss. 6, 2007, 064120. https://doi.org/10.1103/PhysRevB.76.064120
  6. Jiang, J.W., Wang, J.S., and Li, B., "Young's Modulus of Graphene: A Molecular Dynamics Study," Phys. Rev. B, Vol. 80, Iss. 11, 2009, 113405. https://doi.org/10.1103/PhysRevB.80.113405
  7. Kotakoski, J., and Meyer, J.C., "Mechanical Properties of Polycrystalline Graphene Based on a Realistic Atomistic Model," Phys. Rev. B, Vol. 85 Iss. 19, 2012, 195447. https://doi.org/10.1103/PhysRevB.85.195447
  8. Mortazavi, B., and Cuniberti, G., "Atomistic Modeling of Mechanical Properties of Polycrystalline Graphene," Nanotechnology, Vol. 25, No. 21, 2014, 215704. https://doi.org/10.1088/0957-4484/25/21/215704
  9. Sha, Z.D., Quek, S.S., Pei, Q.X., Liu, Z.S., Wang, T.J., Shenoy, V.B., and Zhang, Y.W., "Inverse Pseudo Hall-Petch Relation in Polycrystalline Graphene," Scientific Reports, Vol. 4, 2014, 5991.
  10. Choi, Y., Park, Y., and Hyun, S., "Mechanical Properties of Nanocrystalline Copper under Thermal Load," Phys. Lett. A, Vol. 376, 2012, pp. 758-762. https://doi.org/10.1016/j.physleta.2011.12.027
  11. Plimpton, S., Crozier, P., and Thompson, A., "LAMMPS-largescale Atomic/molecular Massively Parallel Simulator," Sandia National Laboratories, 2007 (http://lamps.sandia.gov/).
  12. Stuart, S.J., Tutein, A.B., and Harrison, J.A., "A Reactive Potential for Hydrocarbons with Intermolecular Interactions," J. Chem. Phys., Vol. 112, No. 14, 2000, pp. 6472-6486. https://doi.org/10.1063/1.481208
  13. Tuan, D.V., Kumar, A., Roche, S., Ortmann., F., and Thorpe, M.F., "Insulating behavior of an Amorphous Graphene Membrane," Phys. Rev. B, Vol. 86, Iss. 12, 2012, 121408. https://doi.org/10.1103/PhysRevB.86.121408
  14. Park, Y., and Hyun, S., "Characterizations of Network Structures Using Eigenmode Analysis," Symmetry, Vol. 7, No. 2, 2015, pp. 962-975. https://doi.org/10.3390/sym7020962

Cited by

  1. Effects of Grain Size Distribution on the Mechanical Properties of Polycrystalline Graphene vol.54, pp.6, 2017, https://doi.org/10.4191/kcers.2017.54.6.10