DOI QR코드

DOI QR Code

Experimental Evaluation of a Multi-action Hybrid Damper under Cyclic Loading

반복하중을 받는 수동형 다중거동 복합 감쇠장치의 실험적 구조성능 평가

  • Received : 2016.06.29
  • Accepted : 2016.11.09
  • Published : 2016.11.30

Abstract

In this study, a multi-action hybrid damper (MHD) showing independent hysteretic characteristics for small and large loading conditions is presented. The MHD is composed of steel elements, two friction pads, and two lead-rubber bearings. Since the friction pads and the lead-rubber bearings are in series connection, only the lead rubber bearing deforms according to the excitation loads before the friction pad slippage occurs, and after the friction slippage, anymore deformation of the lead-rubber bearing does not occur and energy dissipation and damper deformation concentrates on the friction pad. Initial stiffness and hysteresis for small load such as wind for low-rise building is governed by the lead rubber bearing and yielding or friction load for the larger load such as earthquake is determined by the friction pad. Accordingly, the load-deformation behaviors before/after the friction slippage can be independently designed to show good performance for a building structure subject to wind and earthquake loads. The multi-action behavior and energy dissipation capacity of the MHD were evaluated by conducting the cyclic loading tests using a full scale MHD. The test results indicate that the MHD shows the expected hysteretic behavior and stable energy dissipation performance.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. Bergman, D. & Goel S. (1987). Evaluation of cyclic testing of steel plate devices for added damping and stiffness. Report No. UMCE87-10, University of Michigan, 37.
  2. Lee, H. & Kim, S. (2011). Hysteretic behaviors of metall ic dampers with the various slit shape. Journal of the Korea institute for structural maintenance and inspection, 15 (5), 199-208. https://doi.org/10.11112/jksmi.2011.15.5.199
  3. Tsai, K., Chen, H., Hong, C. & Su, Y. (1993). Design of steel triangular plate energy absorbers for seismic-resistant construction. Earthquake Spectra, 9(3), 505-528. https://doi.org/10.1193/1.1585727
  4. Kobori, T., Miura, Y., Fukusawa, E., Yamada, T., Arita, T. & Takenake, Y. (1992). Development and application of hysteresis steel dampers. In Proceedings of 11th world conference on earthquake engineering, 2341-2346.
  5. Clark, P., Aiken, I., Tajirian, F., Kasai, K., Ko, E. & Kimura, I. (1999). Design procedures for buildings incorporating hysteretic damping devices. Passive energy dissipation and active control of vibrations of structures, 1-21.
  6. Pall, A. & Marsh, C. (1982). Response of friction damped braced frames. Journal of Structural Division, ASCE. 108(6), 1313-1323.
  7. Mualla, I. (2000). Experimental and computational evaluation of a novel friction damper device, PhD thesis, Technical University of Denmark.
  8. Fitzgerald, T., Anagnos, T., Goodson, M. & Zsutty, T. (1989). Slotted Bolted Connections in Aseismic Design for Concentrically Braced Connections. Earthquake Spectra. 5(2), 383-391. https://doi.org/10.1193/1.1585528
  9. Robinson, W. (1982). Lead rubber hysteretic bearings suitable for protecting structures during earthquakes. Earthquake Engineering & Structural Dynamics. 10(4), 593-604. https://doi.org/10.1002/eqe.4290100408
  10. Filiatrault, A. & Cherry, S. (1990). Seismic design spectra for friction-damped structures. Journal of Structural Engineering. 116, 334-355.
  11. Fu, Y. & Cherry, S. (2000). Design of friction damped structures using lateral force procedure. Earthquake engineering & structural dynamics. 29(7), 989-1010. https://doi.org/10.1002/1096-9845(200007)29:7<989::AID-EQE950>3.0.CO;2-7
  12. Lee, S., Park, J., Lee, S. & Min, K. (2008). Allocation and slip load of friction dampers for a seismically excited building structure based on storey shear force distribution, Engineering Structures. 30(4), 930-940. https://doi.org/10.1016/j.engstruct.2007.03.020
  13. Wu, J., Yang, J. & Schmitendorf, W. (1998). Reduced-order H${\infty}$ and LQR control for wind-excited tall buildings, Engineering Structures. 20(3), 222-236. https://doi.org/10.1016/S0141-0296(97)00081-3
  14. Korean Architectural Institute. (2009). KBC 2009.
  15. Kim, D., Kim, J., Kim, D., Ha, I., Ahn, T., Kim, H. & Kim, S. (2010). Experimental study on hybrid damper using a high-damping rubber and a steel pin. 2010 Conference Journal of Architectural Institute of Korea. 30(1), 9-10.
  16. Lee, H. & Kim, S. (2011). Hysteretic Behaviors of Metallic Dampers with the Various Slit Shape. Journal of The Korea Institute for Structural Maintenance and Inspection. 15(5). 199-208. https://doi.org/10.11112/jksmi.2011.15.5.199

Cited by

  1. Seismic Performance Test of a Steel Frame with Multi-action Hybrid Dampers vol.23, pp.1, 2019, https://doi.org/10.5000/EESK.2019.23.1.001