DOI QR코드

DOI QR Code

Wind loads on solar panels mounted parallel to pitched roofs, and acting on the underlying roof

  • Leitch, C.J. (Cyclone Testing Station, School of Engineering and Physical Sciences, James Cook University) ;
  • Ginger, J.D. (Cyclone Testing Station, School of Engineering and Physical Sciences, James Cook University) ;
  • Holmes, J.D. (James Cook University, Townsville and JDH Consulting)
  • 투고 : 2014.12.05
  • 심사 : 2015.12.18
  • 발행 : 2016.03.25

초록

This paper describes an investigation of the net wind loads on solar panels and wind loads on the underlying roof surface for panels mounted parallel to pitched roofs of domestic buildings. Typical solar panel array configurations were studied in a wind tunnel and the aerodynamic shape factors on the panels were put in a form appropriate for the Australian/New Zealand Wind Actions Standard AS/NZS 1170.2:2011. The results can also be used to obtain more refined design data on individual panels within an array. They also suggest values for the aerodynamic shape factors on the roof surface under the panels, based on a gust wind speed at roof height, of ${\pm}0.5$ for wind blowing parallel to the ridge, and ${\pm}0.6$ for wind blowing perpendicular to the ridge. The net loads on solar arrays in the middle portion of the roof are larger than those on the same portion of the roof without any solar panels, thus resulting in increased loads on the underlying roof structure.

키워드

참고문헌

  1. American Society of Civil Engineers (2010). ASCE 7-10, Minimum design loads for buildings and other structures, ASCE Reston, Virginia, USA.
  2. Australasian Wind Engineering Society (AWES). (2001), Quality Assurance Manual for Wind-Engineering Studies of Buildings (AWES-QAM-1).
  3. Cao, J., Tamura, Y. and Yoshida, A. (2013), "Wind tunnel investigation of wind loads on rooftop modules for green roofing systems", J. Wind Eng. Ind. Aerod., 118, 20-34. https://doi.org/10.1016/j.jweia.2013.04.006
  4. Ginger, J., Payne, M., Stark, G., Sumant, B. and Leitch, C. (2011), Investigation of wind loads applied to solar panels mounted on roofs. James Cook University, Cyclone Testing Station, Technical Report No. TS821. PDF copy of report at: https://www.jcu.edu.au/cts/publications/content/technical-reports/investigation-on-wind-loads-applied-to-solar-panels-mounted-on-roofs/view
  5. Holmes, J.D. and Ginger, J.D. (2012), "The gust wind speed duration in AS/NZS 1170.2", Australian J. Struct. Eng., 13(3), 207-216.
  6. Holmes, J.D., Allsop, A.C. and Ginger, J.D. (2014), "Gust durations, gust factors and gust response factors in wind codes and standards", Wind Struct., 19(3), 339-352. https://doi.org/10.12989/was.2014.19.3.339
  7. Kopp, G.A. (2014), "Wind loads on low profile, tilted, solar arrays placed on large, flat, low-rise building roofs", J. Struct. Eng. - ASCE, 140(2), 04013057.
  8. Kopp, G.A. and Banks D. (2013), "Use of wind tunnel test methods for obtaining design wind loads on roof mounted solar arrays", J. Struct. Eng. - ASCE, 139(2), 284-287. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000654
  9. Maffei, J., Telleen, K., Ward, W., Kopp, G.A. and Schellenberg, A., (2014), "Wind design practice and recommendations for solar arrays on low-slope roofs", J. Struct. Eng. - ASCE, 140(2), 04013040.
  10. Schellenberg, A., Maffei, J., Telleen, K. and Ward, R. (2013), "Structural analysis and application of wind loads to solar arrays", J. Wind Eng. Ind. Aerod., 123, 261-272. https://doi.org/10.1016/j.jweia.2013.06.011
  11. Standards Australia (2011), Structural design actions. Part 2: wind actions, Australian/New Zealand Standard, AS/NZS 1170.2:2011, Standards Australia, Sydney, New South Wales, Australia.
  12. Stathopoulos, T., Ioannis, Z. and Xypnitou, E. (2014), "Local and overall wind pressure and force coefficients for solar panels", J. Wind Eng. Ind. Aerod., 125, 195-206. https://doi.org/10.1016/j.jweia.2013.12.007
  13. Stenabaugh, S.E., Karava, P. and Kopp, G.A. (2011), "Design wind loads for photovoltaic systems on sloped roofs of residential buildings", Proceedings of the 13th International Conference on Wind Engineering, Amsterdam, Netherlands, July 10-15.
  14. Wood, G.S., Denoon, R.O. and Kwok, K.C.S. (2001), "Wind loads on industrial solar panel arrays and supporting roof structure", Wind Struct., 4(6), 481-494. https://doi.org/10.12989/was.2001.4.6.481

피인용 문헌

  1. Wind loads for designing ground-mounted solar-panel arrays vol.20, pp.3, 2019, https://doi.org/10.1080/13287982.2019.1623001