Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Composite Blade Analysis Library Development through Dimension Reduction/Recovery and Calculating Energy Release Rate

단면의 차원축소/복원해석과 에너지 해방률 계산을 위한 복합재 블레이드 해석 라이브러리 개발에 대한 연구

  • Jang, Jun Hwan (Department of Automobile Engineering, Shinhan University) ;
  • Ahn, Sang Ho (Department of Automobile Engineering, Shinhan University)
  • Received : 2015.10.22
  • Accepted : 2016.02.26
  • Published : 2016.02.29
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, numerical results of sectional analysis, stress recovery and energy release rate were compared with the results of VABS, 3-D FEM through the blade analysis library. The result of stress recovery analysis for one-dimensional model including the stiffness matrix is compared with stress results of three-dimensional FEM. We discuss the configuration of the blade analysis library and compare verifications of numerical analysis results of VABS. Blade analysis library through dimensional reduction and stress recovery is intended to be utilized in conjunction with pre- and post-processing of the analysis program of the composite blade, high-altitude uav's wing, wind blades and tilt rotor blade.

본 논문에서는 블레이드 해석 라이브러리를 통해 단면해석 및 응력복원 해석 결과를 VABS와 3차원 유한요소해석모델의 결과와 비교하였다. 그리고 유한요소모델과 차원축소 모델을 가상균열 닫힘법을 이용하여 에너지 해방률을 계산하였다. 블레이드 해석 라이브러리의 구성, 입력 및 출력 형태, 차원 축소와 복원 과정을 살펴보고 이를 이용한 활용 분야를 기술하였다. 블레이드 해석 라이브러리는 박 벽 단면의 강성 행렬 비교, 3차원 유한요소 모델과 차원 축소 모델의 응력비교 그리고 에너지 해방률 계산 수치 비교연구를 통하여 검증하였다. 차원 축소와 복원해석을 통하여 블레이드 해석 라이브러리는 복합재료 블레이드의 전후처리 프로그램와 연계되어 고고도 무인기, 로터 블레이드, 풍력 블레이드 및 틸트로터 블레이드의 모델링에 활용될 수 있을 것이다.

Keywords

References

  1. Chen, H., Yu, W., and Capellaro, M., "A Critical Assessment of Computer Tools for Calculating Composite Wind Turbine Blade Properties", Wind Energy, Vol. 13, 2009, pp. 497-516. https://doi.org/10.1002/we.372
  2. Hu, P., "VABS-IDE: VABS-Enabled Integrated Design Environment (IDE) for Efficient High-Fidelity Composite Rotor Blade and Wing Design", 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, American Institute of Aeronautics and Astronautics, Inc., Orlando, Florida, 2010.
  3. Hu, T., "A Validation and Comparison about VABS-IDE and VABS-GUI", Master, Utah State University, 2012.
  4. Yu, W. and Blair, M., "GEBT: A General-purpose Nonlinear Analysis Tool for Composite Beams", Composite Structures, Vol. 94, 2012, pp. 2677-2689. https://doi.org/10.1016/j.compstruct.2012.04.007
  5. Yu, W., VABS Manual for Users, 2012.
  6. Yu, W., Hodges, D.H., and Ho, J.C., "Variational Asymptotic Beam Sectional Analysis - An Updated Version", International Journal of Engineering Science, Vol. 59, 2012, pp. 40-64. https://doi.org/10.1016/j.ijengsci.2012.03.006
  7. Park, I.-J., Jung, S.N., Cho, J.Y., and Kim, D.-H., "A Study on Calculation of Cross-Section Properties for Composite Rotor Blades Using Finite Element Method", Journal of The Korean Society for Aeronautical and Space Sciences, Vol. 37, 2009, pp. 442-449. https://doi.org/10.5139/JKSAS.2009.37.5.442
  8. Park, I.-J., Jung, S.N., Cho, J.Y., and Kim, D.-H., "Development of Weighted Triangular Mesh Generation Algorithm using Domain-wise Hash Structure and Quad Tree Structure", Journal of the Korean Society for Aeronautical and Space Sciences, 2008, pp. 110-113.
  9. Park, I.-J., Jung, S.N., Cho, J.Y., and Kim, D-H., "A Study on Calculation of Cross-Section Properties for Composite Rotor Blades Using Finite Element Method", Journal of The Korean Society for Aeronautical and Space Sciences, 2008, pp. 375-378.
  10. Do, H.S., Cho, J.Y., Park, I.-J., Jung, S.N., Kim, T.J., and Kim, D.-H., "Development of Program for Modeling of Cross Section of Composite Rotor Blade", Journal of The Korean Society for Aeronautical and Space Sciences, Vol. 39, 2011, pp. 261-268. https://doi.org/10.5139/JKSAS.2010.39.3.261
  11. Kang, Y.C., Cho, J.Y., Dhadwal, M.K., Jung, S.N., and Kim, T.J., "Development of Program for Modeling of Cross Section of Composite Rotor Blade Using Open CASCADE", Journal of The Korean Society for Aeronautical and Space Sciences, 2011, pp. 1787-1791.
  12. Bathe, K.J., Finite Element Procedures, Prentice Hall, Englewood Cliffs, New Jersey, 1996.
  13. Murakami, Y., "Stress Intensity Factors Handbook", Pergamon Press, 1987.