참고문헌
- Kim, J., Je, T. J., Cho, S. H., Jeon, E. C., and Whang, K. H., "Micro-cutting with diamond tool micro-patterned by femtosecond laser," International journal of precision engineering and manufacturing, Vol. 15, No. 6, pp. 1081-1085, 2014. https://doi.org/10.1007/s12541-014-0440-8
- Riaz Ahmad Mufti, "Total and Component Friction in a Motored and Firing Engine", A Thesis for a Doctorate, University of Leeds, United Kingdom, 2004.
- Lee, S. M., Lee, D. W., Ha, Y. H., Lee, S. J., Hwang, J. H., & Choi, Y. H., "A study on the influence of waviness error to a hydrostatic bearing for a crankshaft pin turner," Tribology Transactions, Vol. 56, No. 6, pp. 1077-1086, 2013. https://doi.org/10.1080/10402004.2013.823532
- Tzeng, S.T, Saibel, E., "Surface Roughness Effect on Slider Bearing Lubrication," ASLE Transactions, Vol. 10, pp.334-338, 1967. https://doi.org/10.1080/05698196708972191
- Patir, N, Cheng, H.S., "An Average Flow Model for Determining Effects of Three Dimensional Roughness on Partial Hydrodynamic Lubrication," ASME Journal of Lubrication Technology, Vol. 100, pp.12-17, 1978. https://doi.org/10.1115/1.3453103
- Patir, N, Cheng, H.S., "Application of the Average Flow Model to Lubrication between Rough Sliding Surfaces," ASME Journal of Lubrication Technology, Vol.101, pp.220-229, 1979. https://doi.org/10.1115/1.3453329
- Teale, J.L., Lebeck, A.O., "An Evaluation of the Average Flow Model for Surface Roughness Effects in Lubrication,", ASME Journal of Lubrication Technology, Vol.02, pp.360-367, 1980.
- Susan, R. H., Salant, R.F., "An Average Flow Model of Rough Surface Lubrication with Inter- Asperity Cavitation," ASME Journal of Tribology, Vol.123, No.1, pp.134-143, 2001. https://doi.org/10.1115/1.1332397
- Lee, S. M., "A study on the lubrication and friction characteristics of the contact surface through the surface analysis", A Thesis for a Doctorate, Pusan National University, Republic of Korea, 2015.
- Retrieved from http://www.olympusims.com/fr/knowledge/metrology/roughness/2d_parameter/
피인용 문헌
- Lubrication Properties of Various Pattern Shapes on Rough Surfaces Considering Asperity Contact vol.17, pp.4, 2018, https://doi.org/10.14775/ksmpe.2018.17.4.039
- Lubrication Behavior of Slider Bearing with Square Pocket Surface vol.16, pp.5, 2016, https://doi.org/10.14775/ksmpe.2017.16.5.119
- CPU 쿨러의 열 및 응력 해석에 관한 융합 연구 vol.11, pp.8, 2016, https://doi.org/10.15207/jkcs.2020.11.8.153
- Analysis of Airflow due to the Configuration of Automotive Diffuser vol.19, pp.11, 2016, https://doi.org/10.14775/ksmpe.2020.19.11.016