Journal of the Korean Geotechnical Society (한국지반공학회논문집)

Korean Geotechnical Society (한국지반공학회)
권호 표지
DOI QR코드

DOI QR Code

Experimental Study of Lunar Rover Wheel's Motion Performance on Korean Lunar Soil Simulant

한국형 인공월면토를 이용한 달탐사 로버 휠 성능평가 실험 연구

  • Wang, Cheng-Can (Dept. of Geo-Space, Univ. of Science & Technology) ;
  • Han, Jin-Tae (Dept. of Geotechnical Eng., Korea Institute of Civil Eng. and Building Tech.)
  • Received : 2016.10.17
  • Accepted : 2016.11.16
  • Published : 2016.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

Lunar rover plays an important role in lunar exploration. Especially, performance of rover wheel related to interaction with lunar soil is of great importance when it comes to optimization of rover's configuration. In this study, in order to investigate the motion performance of lunar rover's wheel on Korean Lunar Soil Simulant (KLS-1), a single wheel testbed was developed and used to carry out a series of experiments with two kinds of wheel with grousers and without grousers which were used to perform the experiments. Wheel traction performance was evaluated by using traction parameters such as drawbar pull, torque and sinkage correlated with slip ratio. The results showed that the single wheel testbed was suitable for evaluation of the performance of wheel and rover wheel with grousers which was likely to have higher traction performance than that without grousers in Korean Lunar soil simulant. The experimental results could be utilized in verification of the optimum wheel design and effectiveness of wheel traction for Korean lunar rover.

달 탐사시 탐사 로버는 반드시 필요하며, 특히 월면토와 로버 휠의 상호작용에 의한 로버 휠의 성능은 로버의 최적 형상을 결정하는데 있어서 매우 중요하다. 본 연구에서는 한국형 인공 월면토(KLS-1)에서 달 탐사 로버 휠의 거동 성능을 평가하기 위하여 단일 휠 성능평가 실험장비를 개발하였고, 이를 이용하여 그라우져 유무에 따른 휠 성능 평가 실험을 수행하였다. 휠 성능은 슬립율에 따른 견인력, 토크, 침하 등으로 평가하였으며, 실험 결과 개발된 단일 휠 성능평가 실험장비는 휠 성능을 적절히 평가하는 것으로 나타났으며, 한국형 인공 월면토에서 그라우져가 있는 휠이 그라우져가 없는 휠에 비해 높은 견인 성능을 보여주었다. 향후 본 실험은 한국형 로버의 최적 휠 결정을 위해 사용될 수 있을 것으로 판단된다.

Keywords

References

  1. Apostolopoulos, D. (2001), "Analytical Configuration of Wheeled Robotic Locomotion", Robotics Institute Carnegie Mellon University, CMU-RI-TR-01-08, pp.1-3.
  2. Bekker, M. (1956), Theory of land locomotion, University of Michigan Press.
  3. Bekker, M. (1960), Off-the-road locomotion: research and development in terramechanics, University of Michigan Press.
  4. Ding, L., Gao, H., Deng, Z., and Tao, J. (2010), "Wheel Slipsinkage and its Prediction Model of Lunar Rover", J. Cent. South Univ. Technol., Vol.17, pp.129-135. https://doi.org/10.1007/s11771-010-0021-7
  5. Ding, L., Deng, Z., Gao, H., Nagatani, K., and Yoshida, K. (2011a), "Planetary Rovers's Wheel-soil Interaction Mechanics: New Challenges and Applications for Wheeled Mobile Robots", Intel Serv Robotics, Vol.4, pp.17-38. https://doi.org/10.1007/s11370-010-0080-5
  6. Ding, L., Gao, H., Deng, Z., Nagatani, K., and Yoshida, K. (2011b), "Experimental Study and Analysis on Driving Wheels' Performance for Planetary Exploration Rovers Moving in Deformable Soil", Journal of Terrachanics, Vol.48, pp.27-45. https://doi.org/10.1016/j.jterra.2010.08.001
  7. Gee-Clough, D. (1978), "A Comparison of the Mobility Number and Bekker Approaches to Traction Mechanics and Recent Advances in Both Methods at N.I.A.E", Proceedings of the 6th International Conference of the International Society for Terrain-Vehicel Systems, Vol.2, pp.735-755.
  8. Heiken, H., Vaniman, D., and French, B. (1991), Lunar source book: a user's guide to the moon. CUP Archive.
  9. Iagnemma, K. (2005), "A Laboratory Single Wheel Testbed for Studying Planetary Rover Wheel-terrain Interaction", Technical Reort of MIT Field and Space Robotics Laboratory 01-05-05.
  10. Janosi, Z. and Hanamoto, B. (1961), Analytical Determination of Drawbar Pull as a Function of Slip for Tracked Vehicle in Deformable Soils. Proc. 1st Int. Conf. of ISTVS, Torino, pp.707-736.
  11. KICT (2015), "Geotechnical Engineering Preparations for Lunar Exploration-Soil Mechanics with Lunar Soil and Laboratory Demonstration of Lunar Enviroments (II).
  12. Liu, C.H. and Wang, J.Y. (1996), "Numerical Simulations of Tiresoil Interaction based on Critical State Soil Mechanics", Journal of Terramechanics, Vol.33, No.5, pp.209-221. https://doi.org/10.1016/S0022-4898(97)00005-0
  13. Liu, J., Gao, H., and Deng, Z. (2008), "Effect of Straight Grousers Parameters on Motion Performance of Small Rigid Wheel on Loose Sand", Information Technology Journal, Vol.7, No.8, pp.1125-1132. https://doi.org/10.3923/itj.2008.1125.1132
  14. Mitchell, J. K., Houston, W. N., Carrier, W. D., III, and Costes, N. C. (1974), "Apollo Soil Mechanics Experiment S-200", Final Rep., NASA Contract NAS 9-11266, Space Sciences Laboratory Series 15, Issue 7, Univ. of California, Berkeley, Calif.
  15. Nakashima, H., Fujii, H., Oida, A., Momozu, M., Kanamori, H., Aoki, S., Yokoyama, T., Shimizu, H, Miyasaka, J., and Ohdoi, K. (2010), "Discrete Element Method Analysis of Single Wheel Performance for a Small Lunar Rover on Sloped Terrain", Journal of Terrainmechanics, Vol.47, pp.307-321. https://doi.org/10.1016/j.jterra.2010.04.001
  16. Ryu, B., Baek, Y., Kim, Y., and Chang, L. (2015), "Basic Study for a Korean Lunar Simulant (KLS-1) Development", Journal of The Korean Geotechnical Society, Vol.31, No.7, pp.53-63. https://doi.org/10.7843/kgs.2015.31.7.53
  17. Sutoh, M., Nagatani, K., and Yoshida, K. (2012), "Analysis of the Traveling Performance of Planetary Rovers with Wheels Equipped with Lugs Over Loose Soil", Department of Aerospace Engineering, Graduate School of Engineering, Tohoku University, Aoba, pp.6-6.
  18. Wong, J. and Reece, A. (1967), "Prediction of Rigid Wheel Performance based on the Analysis of Soil-weheel Stresses", Journal of Terramechanics, Vol.4, No.2, pp.7-25. https://doi.org/10.1016/0022-4898(67)90047-X
  19. Wong, J. (2010), Terramechanics and off-road vehicle engineering, Butterworth-heinemann.

Cited by

  1. 지반 조건 및 휠 형상에 따른 달탐사 로버 휠 주행 성능 평가 실험 연구 vol.37, pp.4, 2017, https://doi.org/10.12652/ksce.2017.37.4.0693