DOI QR코드

DOI QR Code

Effect of high-strength concrete on shear behavior of dry joints in precast concrete segmental bridges

  • Jiang, Haibo (School of Civil and Transportation Engineering, Guangdong University of Technology, Guangzhou Higher Education Mega Center) ;
  • Chen, Ying (School of Civil and Transportation Engineering, Guangdong University of Technology, Guangzhou Higher Education Mega Center) ;
  • Liu, Airong (Guangzhou University-Tamkang University Joint Research Center for Engineering Structure Disaster Prevention and Control, Guangzhou University, Guangzhou Higher Education Mega Center) ;
  • Wang, Tianlong (School of Civil and Transportation Engineering, Guangdong University of Technology, Guangzhou Higher Education Mega Center) ;
  • Fang, Zhuangcheng (School of Civil and Transportation Engineering, Guangdong University of Technology, Guangzhou Higher Education Mega Center)
  • 투고 : 2016.06.16
  • 심사 : 2016.11.09
  • 발행 : 2016.12.10

초록

The use of high-strength concrete (HSC) in precast concrete segmental bridges (PCSBs) can minimize the superstructure geometry and reduce beam weight, which can accelerate the construction speed. Dry joints between the segments in PCSBs introduce discontinuity and require special attention in design and construction. Cracks in dry joints initiate more easily than those in epoxy joints in construction period or in service. Due to the higher rupture strength of HSC, the higher cracking resistance can be achieved. In this study, shear behavior of dry joints in PCSBs was investigated by experiments, especially focusing on cracking resistance and shear strength of HSC dry joints. It can be concluded that the use of HSC can improve the cracking resistance, shear strength, and ductility of monolithic, single-keyed and three-keyed specimens. The experimental results obtained from tests were compared with the AASHTO 2003 design provisions. The AASHTO 2003 provision underestimates the shear capacity of single-keyed dry joint C50 and C70 HSC specimens, underestimates the shear strength of three-keyed dry joint C70 HSC specimens, and overestimates the shear capacity of three-keyed dry joint C50 HSC specimens.

키워드

과제정보

연구 과제 주관 기관 : Guangzhou University

참고문헌

  1. AASHTO (2003), Guide specifications for design and construction of segmental concrete bridges; (2nd Ed.), American Association of State Highway and Transportation Officials, Wanshington D.C., USA, 31 p.
  2. AASHTO (2014), AASHTO LRFD bridge design specifications; (6th Ed.), American Association of State Highway and Transportation Officials, Wanshington D.C., USA.
  3. Alcalde, M., Cifuentes, H. and Medina, F. (2013), "Influence of the number of keys on the shear strength of post-tensioned dry joints", Mater. Construct., 63(310), 297-307. https://doi.org/10.3989/mc.2013.07611
  4. Al-Omaishi, N., Tadros, M.K. and Seguirant, S.J. (2009), "Elasticity modulus, shrinkage, and creep of highstrength concrete as adopted by AASHTO", PCI J., 54(3), 44-63. https://doi.org/10.15554/pcij.06012009.44.63
  5. Bakhoum, M.M. (1990), "Shear behaviour and design of joints in precast concrete segmental bridges", Ph.D. DissertationL Massachusetts Institute of Technology, Cambridge, MA, USA.
  6. BSI (2004), Eurocode 2: design of concrete structures; Part 1-1: General rules and rules for buildings, British Standards Institution, London, England.
  7. Buyukozturk, O., Bakhoum, M.M. and Bettie, S.M. (1990), "Shear behavior of joints in precast concrete segmental bridges", J. Struct. Eng., 12(3380), 3380-3401. DOI: 10.1061/(ASCE)0733-9445(1990)116
  8. Campione, G., Monaco, A. and Minafo, G. (2014), "Shear strength of high-strength concrete beams:Modeling and design recommendations", Eng. Struct., 69, 116-122. https://doi.org/10.1016/j.engstruct.2014.02.029
  9. CECS 104-1999 (1999), Technical specification for high-strength concrete structures; Standard Press of China, Beijing, China. [In Chinese]
  10. Diaz, B.E. (1975), "The technique of glueing precast elements of the rio-niteroi bridge", Mater. Constr. Mater. Struct., 8(1), 43-50.
  11. French, C., Mokhtarzadeh, A., Ahlborn, T. and Leon, R. (1998), "High-strength concrete applications to prestressed bridge girders", Constr. Build. Mater., 12(2-3), 105-113. https://doi.org/10.1016/S0950-0618(97)00012-3
  12. Gaston, J.R. and Kriz, L.B. (1964), "Connections in precast concrete structures-scarf joints", PCI J., 9(3), 37-59. https://doi.org/10.15554/pcij.06011964.37.59
  13. Issa, M.A. and Abdalla, H.A. (2007), "Structural behavior of single key joints in precast concrete segmental bridges", J. Bridge Eng., 12(3), 315-324. https://doi.org/10.1061/(ASCE)1084-0702(2007)12:3(315)
  14. Jiang, H., Chen, L., Ma, Z.J. and Feng, W. (2015), "Shear behavior of dry joints with castellated keys in precast concrete segmental bridges", J. Bridge Eng., 04014062. DOI: 10.1061/(ASCE)BE.1943-5592.0000649
  15. Jiang, H., Wei, R., Ma, Z.J., Li, Y. and Jing, Y. (2016), "Shear strength of steel-reinforced concrete dry joints in precast segmental bridges", J. Bridge Eng., 04016085. DOI: 10.1061/(ASCE)BE.1943-5592.0000968
  16. Jones, L.L. (1959), "Shear test on joints between precast post-tensioned units", Mag. Concr. Res., 11(31), 25-30. https://doi.org/10.1680/macr.1959.11.31.25
  17. JTG D62-2004 (2004), Code for design of highway reinforced concrete and prestressed concrete bridges and culverts; Standard Press of China, Beijing, China. [In Chinese]
  18. Koseki, K. and Breen, J.E. (1983), "Exploratory study of shear strength of joints for precast segmental bridges", Rresearch Report NO. 248-1; Center for Transportation Research, The University of Texas at Austin, Austin, TX, USA.
  19. Leung, Y.W., Deeprasertwong, K. and Takebayashi, T. (1994), "Full-scale destructive test of a precast segmental box girder bridge with dry joints and external tendons", Proceedings of the Institution of Civil Engineers: Structures and Buildings, London, England, August.
  20. Li, F.Y. and Zhao, R.D. (2003), "Analysis on the structural behaviors of the continuous beam with external prestress and high strength concrete", Proceedings of International Conference on Advances in Concrete and Structures, Xuzhou, China, September.
  21. Li, G., Yang, D. and Lei, Y. (2013), "Combined shear and bending behavior of joints in precast concrete segmental beams with external tendons", J. Bridge Eng., 18(10), 1042-1052. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000453
  22. Nagle, T.J. and Kuchma, D.A. (2007), "Shear transfer resistance in high-strength concrete girders", Mag. Concr. Res., 59(8), 611-620. https://doi.org/10.1680/macr.2007.59.8.611
  23. Ramirez, G., MacGregor, R., Kreger, M.E., Roberts-Wollmann, C. and Breen, J. (1993), "Shear strength of segmental structures", Proceedings of the Workshop AFPC External Prestressing in Structures, Saint-Remy-les-Chevreuse, France, June.
  24. Saibabu, S., Srinivas, V., Sasmal, S., Lakshmanan, N. and Iyer, N.R. (2013), "Performance evaluation of dry and epoxy jointed segmental prestressed box girders under monotonic and cyclic loading", Constr. Build. Mater., 38, 931-940. https://doi.org/10.1016/j.conbuildmat.2012.09.068
  25. Shamass, R., Zhou, X. and Alfano, G. (2015), "Finite-element analysis of shear-off failure of keyed dry joints in precast concrete segmental bridges", J. Bridge Eng., 04014084. DOI: 10.1061/(ASCE)BE.1943-5592.0000669
  26. Shamass, R., Zhou, X. and Wu, Z. (2016), "Numerical analysis of shear-off failure of keyed epoxied joints in precast concrete segmental bridges", J. Bridge Eng., 04016108. DOI: 10.1061/(ASCE)BE.1943-5592.0000971
  27. Shi, Q.Y. and Liu, L.L. (2014), "Research on the shear strength of high-strength concrete beams with web bars by concentrated load", Proceedings of the 2nd International Conference on Civil Engineering and Material Engineering 2013, Wuhan, China, December.
  28. Shin, D., Chung, C., Oh, H., Park, S., Kim, I., Kim, Y., Byun, T. and Kang, M. (2016), "Structural behavior of precast concrete deck with ribbed loop joints in a composite bridge", Smart Struct. Syst., Int. J., 17(4), 559-576. https://doi.org/10.12989/sss.2016.17.4.559
  29. Teoh, B.K., Mansur, M.A. and Wee, T.H. (1999), "Maximum shear strength of high strength concrete beams", Proceedings of the 1st International Conference on Advances in Structural Engineering and Mechanics, Seoul, South Korea, August.
  30. Turmo, J., Ramos, G. and Aparicio, A.C. (2006), "Shear strength of dry joints of concrete panels with and without steel fibres - Application to precast segmental bridges", Eng. Struct., 28(1), 23-33. https://doi.org/10.1016/j.engstruct.2005.07.001
  31. Turmo, J., Ramos, G. and Aparicio, A.C. (2012), "Towards a model of dry shear keyed joints: modelling of panel tests", Comput. Concr., Int. J., 10(5), 469-487. https://doi.org/10.12989/cac.2012.10.5.469
  32. Zhou, X.M., Mickleborough, N. and Li, Z.J. (2005), "Shear strength of joints in precast concrete segmental bridges", ACI Struct J., 102(1), 3-11.

피인용 문헌

  1. Flexural behavior of precast concrete wall - steel shoe composite assemblies with dry connection vol.29, pp.4, 2016, https://doi.org/10.12989/scs.2018.29.4.545
  2. Cost optimization of segmental precast concrete bridges superstructure using genetic algorithm vol.72, pp.4, 2016, https://doi.org/10.12989/sem.2019.72.4.503
  3. Flexural Behavior of Precast Concrete Segmental Box-Girders with Dry Joints vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/8895180
  4. Shear performance of single-keyed dry joints between reactive power concrete and high strength concrete in push-off tests vol.103, pp.2, 2016, https://doi.org/10.1177/0036850420928643
  5. Shear strength of match-cast-free dry joint in precast girders vol.26, pp.2, 2016, https://doi.org/10.12989/cac.2020.26.2.161
  6. Cyclic performance of different mitigation strategies proposed for segmental precast bridge piers vol.36, pp.None, 2016, https://doi.org/10.1016/j.istruc.2021.12.020