Abstract
For higher reliability against a link failure of a control network in railway vehicles, a recovery mechanism is needed. We introduce a problem that, when a link failure occurs in a ring-topology control network, a node may experience a significant increase of transmission delay depending on its relative position within the network. We then propose two mechanisms to solve this problem: (1) differentiating and prioritizing node traffic in forwarding; and (2) switching some nodes to a backup bus-topology network. Our simulation study shows that, while the first mechanism achieves a limited gain by only compensating queuing delay, the second one gets a sufficient gain which is impacted by the number of nodes switched to the bus network.
철도 차량 내 전자 장치 연결의 높은 안정성을 위해 제어망은 링크 장애 발생 시에도 장치의 계속된 연결을 지원할 수 있어야 한다. 본 논문은 철도 차량용 이더넷 기반 제어망에서 링 토폴로지 적용 시 링크 장애가 발생하면 노드 위치에 따라 급격한 전송 딜레이 변화가 발생함을 보인다. 이 문제를 해결하기 위해, 장치별 딜레이 증가를 감안한 포워딩 우선순위를 설정하는 기법과 백업용 버스 망을 두어 장애 발생 시 일부 노드를 선택적으로 버스 망으로 스위칭 시키는 토폴로지 스위칭 기법을 제안한다. 시뮬레이션을 통한 성능 평가에서, 포워딩 우선순위를 설정하는 기법은 큐잉 딜레이의 보상만 가능하여 제한된 효과를 얻는 반면, 토폴로지 스위칭 기법은 링크 수에 따른 딜레이 증가 측면에 대해 충분한 성능 개선이 있음을 보인다. 또한, 토폴로지 스위칭 기법의 딜레이 성능과 패킷 손실율은 버스 망에 연결된 노드 수에 영향을 받는 것을 보인다.